journal article·2015-11

Rheological characteristics investigation of high percentage RAP binders with WMA technology at various aging states

Feipeng Xiao, Bradley Putman, Serji Amirkhanian

Publisher page

Abstract

Abstract The application of reclaimed asphalt pavement (RAP) is very promising and the research activities focusing on this subject is numerous in recent year. However, how to increase the percentage of RAP in the surface layer mixtures of asphalt pavement and meet or exceed the standards is challenging to the state highway agencies in the USA. The objective of this study is to explore the rheological properties of the high percentage (up to 50%) of RAP binder with three base binders in terms of five RAP binder content, two RAP binder sources, one HMA and one warm mix additive (WMA) technologies at three aging states. The viscosity, failure temperature, rutting resistance, fatigue resistance of various asphalt binders were tested in this study. The results indicated that the combined binders after a short term aging and a long term aging procedures still satisfied the requirement of asphalt binder set by Superpave binder specifications. In addition, increasing the RAP binder concentration could improve the rutting resistance of asphalt binder but a reduction in the fatigue resistance was noticed. However, the WMA additive could offset these properties of combined binder. Moreover, the results indicated that the RAP source typically affected the performance properties of combined asphalt binder and should be investigated individually.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Moisture susceptibility and rut resistance of natural sand mixtures with RAP10.1061/(ASCE)MT.1943-5533.0001186 ↗
2. Laboratory investigation of utilizing high percentage of RAP in rubberized asphalt mixtures10.1617/s11527-009-9483-1 ↗
3. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP10.1016/j.conbuildmat.2012.02.095 ↗
4. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures10.1016/j.conbuildmat.2014.04.002 ↗
5. McDaniel · 2001
6. Mallick · 2007
7. Mallick · 2008
8. B. Putman, F. Xiao, Investigation of Warm Mix Asphalt (WMA) Technologies and Increased Percentages of Reclaimed Asphalt Pavement (RAP) in Asphalt Mixtures, FHWA-SC-12-05, 2012.
9. Study on recycled asphalt concrete for use in surface course in airport pavement10.1016/j.resconrec.2009.06.003 ↗
10. Production of innovative, recycled and high performance asphalt for road pavements10.1016/j.resconrec.2009.08.009 ↗
11. Tao · 2009
12. Utilization of foaming technology in warm-mix-asphalt mixtures containing moist aggregates10.1061/(ASCE)MT.1943-5533.0000297 ↗
13. Characterization of rutting performance of warm additive modified asphalt mixtures10.1016/j.conbuildmat.2011.12.101 ↗
14. Assessing potential for warm-mix asphalt technology adoption10.3141/2040-10 ↗
15. Audrey Copeland, Reclaimed Asphalt Pavement in Asphalt Mixtures: State of the Practice, No. FHWA-HRT-11-021, 2011.
16. R. West, R. Willis, R. Brown, M. Blow, Improved Performance of Reclaimed Asphalt Pavement Mixes, No. SD2011-08-F, 2014.
17. Reclaimed asphalt pavement and additives’ influence on 3D linear behaviour of warm mix asphalts
18. Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures10.1016/j.conbuildmat.2014.08.073 ↗
19. SC T-95 Recovery of Asphalt Binder from Hot Mix Asphalt by Means of the Rotavapor Apparatus, SCDOT Designation: SC-T-95.
20. AASHTO T316, Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer, standard by American Association of State and Highway Transportation Officials, 2013.
21. AASHTO T240 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test), standard by American Association of State and Highway Transportation Officials, 2013.
22. AASHTO R28, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV), standard by American Association of State and Highway Transportation Officials, 2012.