journal article·2015-12

Factors affecting shear strength between open-graded friction course and underlying layer

Weimin Song, Xiang Shu, Baoshan Huang, Mark Woods

Publisher page

Abstract

Abstract This study investigates the factors that affect the bonding strength between open-graded friction course (OGFC) and underlying layer through laboratory testing. The direct shear strength test was performed to obtain the shear strength between OGFC and different underlying layers. Three factors were considered in the study: mixture type of underlying layer, tack coat application rate, and temperature. Two types of dense graded surface mixture and one type of stone matrix asphalt (SMA) were selected as underlying layer. The shear strength was evaluated at four tack coat application rates and three test temperatures. To investigate the friction between OGFC and underlying layer on the shear strength, the surface texture depth of underlying layer was also measured. Results from the study showed that underlying layer mixture type, tack coat application rate, and temperature all played a significant role in the shear strength, with temperature as the most significant factor followed by surface texture depth of underlying layer. At low temperatures, high stiffness of asphalt made both tack coat rate and surface texture depth of underlying less significant. At intermediate to high temperatures, surface texture depth of underlying layer had a significant effect on the shear strength, indicating that selection of appropriate underlying layer with adequate friction with OGFC is critical for a good bonding shear strength. Surface texture depth of underlying layer can be used as an indicator of the friction between OGFC and underlying layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Railway Engineering and Dynamics · Mechanical stress and fatigue analysis · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Huber · 2000
2. Kline · 2010
3. P.S. Kandhal, R.B. Mallick, Open graded asphalt friction course: State of the practice, National Center for Asphalt Technology Report, 1998 (98–7).
4. Design, construction, and performance of new-generation open-graded friction courses
5. ASTM International, ASTM D 7064-04: Standard practice for open-graded friction course (OGFC) mix design, West Conshohocken, PA, ASTM International, 2006, pp. 937–943.
6. A comparative study on properties of porous friction course mixes with neat bitumen and modified binders10.1016/j.conbuildmat.2008.08.008 ↗
7. Federal Aviation Administration (FAA), 150/5370-10B Standards for Specifying Construction of Airports, US Department of Transportation, Washington, DC, 2005.
8. Australian asphalt pavement association (AAPA), National asphalt specifications, second ed., Kew Victoria, Australia, 2004.
9. Transit New Zealand (TNZ), Specification for open graded porous asphalt, TNZ P, 2003, 11:2003.
10. Southern African Bitumen Association, The design and use of porous asphalt mixes, Roggebaai, South Africa, Manual 17, 1995.
11. M. Asshi, K K., Activities of porous asphalt on expressways, in: Proceedings of Seminar Terhadap Penggunaan Porous Asphalt Oleh Infrastructure Development Institute Japan (IDIJ) Dan Pembentangan Hasil Kajian Yang Telah Dilaksanakan Di Lebuhraya Utara Selatan, Malaysia, 2003.
12. Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers10.1016/j.conbuildmat.2011.08.029 ↗
13. Influence of asphalt tack coat materials on interface shear strength10.3141/1789-06 ↗
14. Shear bond strength between asphalt layers for laboratory prepared samples and field cores10.1016/j.conbuildmat.2008.11.017 ↗
15. Gong · 2013
16. R.C. West, J. Zhang, J. Moore, Evaluation of bond strength between pavement layers, NCAT Report, 2005, 05–8.
17. I. Deysarkar, Test set-up to determine quality of tack coat, 2004.
18. Evaluation of construction practices that influence the bond strength at the interface between pavement layers10.1061/(ASCE)0887-3828(2008)22:3(154) ↗
19. Effect of surface characteristics on bonding properties of bituminous tack coat10.3141/2180-16 ↗
20. Interlayer bond testing using a model material10.1016/j.conbuildmat.2011.06.009 ↗
21. J.R. Miró Recasens, A.H. Martínez Reguero, F.E. Pérez Jiménez, Evaluation of the effect of heat-adhesive emulsions for tack coats with shear test from the road research laboratory of Barcelona, 2009.
22. Statistical investigation of two different interlayer shear test methods10.1617/s11527-008-9414-6 ↗