journal article·2016-05

Monitoring the setting process of eco-binders by ultrasonic P-wave and S-wave transmission velocity measurement: Mortar vs concrete

Jérôme Carette, Stéphanie Staquet

Publisher page

Abstract

Abstract Current environmental imperatives have motivated much research on the possibilities of substitution of clinker, responsible for substantial emissions of CO 2 , by by-products of various industries. The concretes investigated are designed as to limit the early age cracking risk despite a massive substitution of up to 75% of clinker. In this framework, interest has been shown to mix designs combining the benefits of ground granulated blast-furnace slag and limestone microfiller. The aim of this study is to evaluate the impact of environmentally friendly cement-based binders on the initial and final setting time of mortars and concretes by means of a standard method (ASTM C403), early age compressive strength, elastic modulus, and ultrasonic transmission velocity measurements of P-waves and S-waves. This last method was observed to be a relevant setting indicator for both mortar and concrete samples. Critical influence of both the binder’s composition and the aggregate content has been observed on the setting process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Making concrete “greener” with fly ash
2. Reducing the environmental impact of concrete
3. Greening of the concrete industry for sustainable development
4. Drying shrinkage of mortars with limestone filler and blast-furnace slag10.3989/mc.2003.v53.i271-272.284 ↗
5. Strength development of ternary blended cement with limestone filler and blast-furnace slag10.1016/S0958-9465(01)00056-7 ↗
6. Effect of curing temperature on the thermal expansion and phase composition of hydrated limestone-slag cement
7. Development of engineered cementitious composites with limestone powder and blast furnace slag10.1617/s11527-009-9549-0 ↗
8. Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler10.1617/s11527-010-9637-1 ↗
9. Early-age deformation and autogenous cracking risk of slag-limestone filler-cement blended binders10.1016/j.conbuildmat.2014.01.037 ↗
10. Limestone fillers cement based composites: effects of blast furnace slags on fresh and hardened properties10.1016/j.conbuildmat.2013.10.076 ↗
11. Buffo-Lacarrière · 2012
12. Ultrasonic in-situ monitoring of setting process of high-performance concrete10.1016/j.cemconres.2003.10.012 ↗
13. Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity10.1016/j.cemconres.2008.04.006 ↗
14. Possibilities of using the ultrasonic wave transmission method to estimate initial setting time of cement paste10.1016/j.cemconres.2008.08.003 ↗
15. Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting10.1016/j.cemconres.2009.06.016 ↗
16. Monitoring fresh concrete by ultrasonic transmission measurements: exploratory multi-way analysis of the spectral information10.1016/j.chemolab.2008.08.005 ↗
17. A new US procedure to determine setting period of cement pastes, mortars, and concretes10.1016/j.cemconres.2013.05.014 ↗
18. Hydration of cementitious materials by pulse echo USWR: method, apparatus and application examples10.1016/S0008-8846(00)00352-5 ↗
19. Comparison of ultrasonic wave transmission and reflection measurements with P- and S-waves on early age mortar and concrete10.1007/BF02479285 ↗
20. Comparison between two ultrasonic methods in their ability to monitor the setting process of cement pastes10.1016/j.cemconres.2009.07.002 ↗
21. Monitoring the setting process of mortars by ultrasonic P-wave and S-wave transmission velocity measurement10.1016/j.conbuildmat.2015.06.054 ↗
22. Determination of the setting time of environmentally friendly cement-based binders: mortar vs concrete
23. SCC mixes with poorly graded aggregate and high volume of limestone filler10.1016/S0008-8846(03)00013-9 ↗
24. Rheological properties of highly flowable mortar containing limestone filler-effect of powder content and W/C ratio10.1016/j.cemconres.2004.05.008 ↗
25. Superplasticizer effects on setting and structuration mechanisms of ultrahigh-performance concrete10.1016/S0008-8846(00)00428-2 ↗
26. Effect of addition of Sikament-R superplasticizer on the hydration characteristics of portland cement pastes10.1016/j.hbrcj.2012.09.001 ↗
27. Effect of delaying addition time of SMF superplasticizer on the physico-mechanical properties and durability of cement pastes10.1016/j.conbuildmat.2012.02.068 ↗
28. Life-cycle inventory analysis of concrete production: a critical review10.1016/j.cemconcomp.2014.03.005 ↗
29. Effect of mixing on the early hydration of alite and OPC systems10.1016/j.cemconres.2011.06.011 ↗
30. Early-age properties of cement-based materials. II: influence of water-to-cement ratio10.1061/(ASCE)0899-1561(2009)21:9(512) ↗
31. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times10.1016/j.conbuildmat.2013.10.011 ↗
32. Application of maturity approach to setting times
33. Maturity approach applied to concrete by means of Vicat tests
34. Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
35. Draft operating protocol to determine the level of heat released during cement hydration on a concrete specimen placed in a quasi-adiabatic calorimeter designed for concretes (QAB)
36. 2010
37. Design of a revisited TSTM system for testing concrete since setting time under free and restraint conditions
38. How to monitor the modulus of elasticity of concrete, automatically since the earliest age?10.1617/s11527-013-0051-3 ↗
39. Identification of the percolation threshold in cementitious pastes by monitoring the E-modulus evolution10.1016/j.cemconcomp.2012.03.001 ↗
40. Abel · 2009
41. The early age non-destructive testing of concrete made with recycled concrete aggregate10.1016/j.conbuildmat.2012.07.058 ↗
42. Automated shear-wave techniques to investigate the setting and hardening of concrete in through-transmission
43. Continuous monitoring of setting and hardening of mortar and concrete10.1016/j.conbuildmat.2003.10.002 ↗
44. Quasi-adiabatic calorimetry for concretes: influential factors
45. Hawkins · 2003
46. Monitoring setting and hardening process of mortar and concrete using ultrasonic shear waves10.1016/j.conbuildmat.2014.08.044 ↗
47. Mechanical properties of cement pastes and mortars at early ages: evolution with time and degree of hydration
48. Autogenous deformations of cement pastes: Part II. W/C effects, micro-macro correlations, and threshold values10.1016/j.cemconres.2004.10.020 ↗
49. Modeling the influence of limestone filler on cement hydration using CEMHYD3D10.1016/j.cemconcomp.2005.10.006 ↗
50. The role of calcium carbonate in cement hydration10.1016/j.cemconres.2006.10.013 ↗
51. Monitoring the early-age hydration of self-compacting concrete using ultrasonic p-wave transmission and isothermal calorimetry10.1617/s11527-011-9717-x ↗
52. Effects of air voids on ultrasonic wave propagation in early age cement pastes10.1016/j.cemconres.2011.04.005 ↗