Sulfate attack of Portland cement concrete under dynamic flexural loading: A coupling function
Source abstract
Abstract
Abstract In saline regions, infrastructures (e.g., structures under earthquake, pavement slabs, bridge decks, airfield runways, railway sleepers and railway bridges, even high-speed railways and concrete structures in ocean) are attacked by sulfate compounds (Na2SO4, MgSO4, etc.), coupled with dynamic loading. This report studied the flexural strength, relative dynamic elastic modulus and sulfate content under sulfate attack incorporating with dynamic flexural loading (stress level = 20%, 40% and 60%), and also analyzed the microstructure and atom ratio of attached samples via SEM and EDS. The result shows that solution concentration and stress level are two primary and important factors in sulfate attack cases. Meanwhile, opposite with the static attack case, dynamic loading will also make the strength loss occur earlier, especially under high stress level of dynamic loading (60%). The reinforcement contributed by new phase forming on flexural strength is offset because of the additional dynamic loading. Additionally, the experimental result revealed that the relative dynamic elastic modulus can be used to semi-quantitatively evaluate the long-term sulfate attack samples, but is not suggested to be used on short-term sulfate attacked samples because the result does not match the flexural strength trend. Based on the updated data in this study, sulfate attack stages coupled with dynamic flexural loading are summarized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Skalny · 2002
2. Experimental investigation on the properties and microstructure of magnesium oxychloride cement prepared with caustic magnesite and dolomite10.1016/j.conbuildmat.2015.01.056 ↗
3. Long-term performance of cement paste during combined calcium leaching–sulfate attack: kinetics and size effect10.1016/j.cemconres.2004.07.039 ↗
4. Microstructural and microanalytical studies of sulfate attack III. Sulfate-resisting Portland cement: reactions with sodium and magnesium sulfate solutions10.1016/0008-8846(95)00151-2 ↗
5. Microstructural and microanalytical studies of sulfate attack. IV. Reactions of a slag cement paste with sodium and magnesium sulfate solutions10.1016/0008-8846(96)00089-0 ↗
6. Microstructural and microanalytical studies of sulfate attack. I. Ordinary Portland cement paste10.1016/0008-8846(92)90033-R ↗
7. Impact of sulfate attack on mechanical properties and hydraulic conductivity of a cement-admixed clay10.1016/j.clay.2014.09.012 ↗
8. Sulfate resistance of blended cement: prediction and relation with flexural strength10.1016/0008-8846(90)90073-7 ↗
9. Physical and microstructural aspects of sulfate attack on ordinary and limestone blended Portland cements10.1016/j.cemconres.2009.08.005 ↗
10. A thermodynamic approach to the hydration of sulphate-resisting Portland cement10.1016/j.wasman.2006.01.023 ↗
11. Mechanism of sulfate attack on Portland cement concrete—another look10.1016/0008-8846(83)90040-6 ↗
12. Durability of concrete exposed to sulfate attack under flexural loading and drying–wetting cycles10.1016/j.conbuildmat.2012.05.033 ↗
13. Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkali-silica reactivity
14. Durability of self-consolidating concrete to sulfate attack under combined cyclic environments and flexural loading10.1016/j.cemconres.2008.12.003 ↗
15. Dynamic behavior of tensile anchors to concrete
16. Sulfate attack research—whither now?10.1016/S0008-8846(01)00510-5 ↗
17. Flexural fatigue-life assessment and strength prediction of glass fibre reinforced polymer concrete composites10.1155/2014/928278 ↗
18. Flexural fatigue-life distributions of plain and fibrous concrete at various stress levels10.1061/(ASCE)0899-1561(2005)17:6(650) ↗
19. A method of predicting crack widths and deflections for fatigue loading
20. A damage model for concrete subjected to fatigue loading
21. Study on the influence of alternation loading to the speed of sulfate corrosion concretes
22. Deterioration characteristics of concrete under sulfate erosion and fatigue load
23. Taylor · 1997
24. Mehta · 2006
25. A Spec Odyssey-Sulfate Resistant Concrete for the 1980’s
26. B. Guan, S. Chen, R. Xiong, Y. Sheng, H. Li, Stress Analysis of Cement Concrete Under Fatigue Corrosion, 2013.
27. The first example of an increase in the enantioselectivity of a chemical reaction in the presence of a chiral Lewis acid under high pressure10.1002/anie.199314851 ↗