journal article·2016-07

Deterioration of pastes exposed to leaching, external sulfate attack and the dual actions

Chuansheng Xiong, Linhua Jiang, Yi Xu, Hongqiang Chu, Ming Jin, Yan Zhang

Publisher page

Abstract

Abstract This paper is aim to clarify the deterioration of concrete exposed to leaching, external sulfate attack and the dual actions. Hardened plain and blended cement pastes with different w/b ratio (water to binder ratio) and fly ash (FA) contents, respectively, were exposed to (NH 4 ) 2 SO 4 , NH 4 Cl and Na 2 SO 4 solutions. Compressive strength, linear expansion, mass variation and Vickers hardness on the cross sections were determined. SEM, EDS and XRD were used to analyze the degradation mechanism of pastes under different exposure conditions. Results showed that, the deterioration of the specimens varied between different pastes and exposure conditions. The most serious damage was observed on the specimens exposed to the (NH 4 ) 2 SO 4 solution with dually corrosive actions. Deterioration of pastes was accelerated as the increase of w/b ratio. The addition of a suitable quantity of fly ash could retard the degradation rates of pastes under leaching and/or sulfate attack to some extent. The specimens under NH 4 Cl condition mainly suffered from softening of matrix due to leaching. For specimens with Na 2 SO 4 attack, volumetric expansion caused by the formation of gypsum and gypsum was the primary chemical attack mechanism. While in the cases of (NH 4 ) 2 SO 4 attack, specimens suffered from both softening and expansion of pastes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Effect of carbonation, chloride and external sulphates on the leaching behaviour of major and trace elements from concrete10.1016/j.cemconcomp.2012.02.002 ↗
2. Durability of concrete exposed to leaching and external sulphate attacks
3. Predicting the durability of Portland cement systems in aggressive environments-Laboratory validation10.1016/j.cemconres.2004.03.029 ↗
4. Classification of concrete damage caused by chemical attack10.1007/BF02473022 ↗
5. Optimization of ash content in overburden dumps: A numerical approach
6. Leaching behaviour of major and trace elements from concrete: Effect of fly ash and GGBS10.1016/j.cemconcomp.2015.02.002 ↗
7. Effect of calcium leaching on the pore structure, strength, and chloride penetration resistance in concrete specimens10.1016/j.nucengdes.2013.02.049 ↗
8. Durability of concrete under sulfate attack exposed to freeze-thaw cycles10.1016/j.coldregions.2014.12.006 ↗
9. Preliminary study on short-term sulphate attack evaluation by non-linear impact resonance acoustic spectroscopy technique10.1016/j.conbuildmat.2015.01.016 ↗
10. Predicting the calcium leaching behavior of cement pastes in aggressive environments10.1016/j.conbuildmat.2011.10.031 ↗
11. Material and environmental parameter effects on the leaching of cement pastes: experiments and modelling10.1016/j.cemconres.2007.10.009 ↗
12. Long-term performance of cement paste during combined calcium leaching–sulfate attack: kinetics and size effect10.1016/j.cemconres.2004.07.039 ↗
13. Diffusion of sulfate ions into cement stone regarding simultaneous chemical reactions and resulting effects10.1016/S0008-8846(99)00138-6 ↗
14. Coupled chemo-transport-mechanical modelling and numerical simulation of external sulfate attack in mortar10.1016/j.cemconcomp.2013.12.010 ↗
15. Experimental study of mechanical behaviour of cement paste under compressive stress and chemical degradation10.1016/j.cemconres.2008.06.011 ↗
16. Leaching behaviour of mixtures containing plaster of paris and calcium sulphoaluminate clinker10.1016/j.cemconres.2010.03.013 ↗
17. Chemo-mechanical coupling behaviour of leached concrete: part I: experimental results10.1016/j.nucengdes.2007.02.013 ↗
18. Mechanical properties of calcium-leached cement pastes: triaxial stress states and the influence of the pore pressures10.1016/S0008-8846(01)00472-0 ↗
19. Effect of pH on the physico-mechanical properties of marble10.1007/s10064-006-0047-0 ↗
20. Effect of acidic water on physico-mechanical behaviour of rock
21. Variation on physico-mechanical properties of Kota stone under different watery environments10.1016/j.buildenv.2006.11.032 ↗
22. An effective diffusivity for sulfate transport into concrete10.1016/0008-8846(95)00108-O ↗
23. Diffusivity and micro-hardness of blended cement materials exposed to external sulfate attack10.1016/j.cemconcomp.2011.08.016 ↗
24. Modeling of damage in cement-based materials subjected to external sulfate attack I: formulation, II: comparison with experiments10.1061/(ASCE)0899-1561(2003)15:4(305) ↗
25. Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements
26. Attack on plain and blended cements exposed to aggressive sulfate environments10.1016/S0958-9465(01)00082-8 ↗
27. Magnesium-sodium sulfate attack in plain and blended cements10.1061/(ASCE)0899-1561(1994)6:2(201) ↗
28. Portland ash cement degradation in ammonium-sulfate solution10.1016/S0008-8846(98)00023-4 ↗
29. Phase composition changes due to ammonium-sulphate: attack on Portland and Portland fly ash cements10.1016/S0950-0618(99)00017-3 ↗
30. Durability of concrete exposed to leaching and external sulphate attacks10.1016/j.cemconres.2009.07.021 ↗
31. The impact of in-situ leaching on the natural environment of ion-type RE mine
32. Interaction between sulfate and chloride solution attack of concretes with and without fly ash10.1016/j.cemconres.2007.02.016 ↗
33. Effects of mix composition and water-cement ratio on the sulfate resistance of blended cements10.1016/j.cemconcomp.2006.11.007 ↗
34. Sulfate attack and role of silica fume in resisting strength loss10.1016/j.cemconcomp.2003.11.003 ↗
35. Attack on plain and blended cements exposed to aggressive sulfate environments10.1016/S0958-9465(01)00082-8 ↗
36. Mechanism of expansion of mortars with limestone filler due to external sulfate attack
37. Microstructural study of sulphate attack on ordinary and limestone Portland cements at ambient temperature10.1016/S0008-8846(02)00914-6 ↗
38. Mechanism of sulfate attack: a fresh look Part 1: summary of experimental results10.1016/S0008-8846(02)00724-X ↗
39. The influence of mineral additives on the strength and porosity of OPC mortar10.1016/S0008-8846(99)00180-5 ↗
40. Predicting the durability of Portland cement systems in aggressive environments-Laboratory validation10.1016/j.cemconres.2004.03.029 ↗
41. Effect of the leaching of calcium hydroxide from cement paste on mechanical and physical properties10.1016/S0008-8846(97)00042-2 ↗
42. Influence of cation type on deterioration process of cement paste in sulfate environment10.1016/j.conbuildmat.2014.08.042 ↗
43. Sulfate attack, or is it?10.1016/S0008-8846(99)00068-X ↗
44. Use of ammonium nitrate solution to simulate and accelerate the leaching of cement pastes due to deionized water10.1680/macr.1997.49.181.295 ↗
45. Study on water sorptivity of the surface layer of concrete10.1617/s11527-013-0162-x ↗
46. Chloride binding of cement-based materials subjected to external chloride environment-A review10.1016/j.conbuildmat.2008.02.004 ↗
47. Stability of Friedel’s salt in carbonated concrete structural elements10.1016/S0008-8846(96)85010-1 ↗
48. The mechanism of formation and transformation of ettringite10.1016/S1005-8850(06)60035-2 ↗
49. Thermodynamic investigation of the CaO-Al2O3-CaSO4⋅2H2O system at 25°C and the influence of Na2O10.1016/0008-8846(93)90153-Z ↗