A study on the applicability of the efficiency factor of supplementary cementitious materials to durability properties
Source abstract
Abstract
Abstract Supplementary cementitious materials (SCMs), such as fly ash, pozzolan or blastfurnace slag, are widely used to produce blended portland cements, since they lead to a significant reduction in CO 2 emission in the production phase compared to portland cement. A practical and generally accepted approach to evaluate the contribution of SCMs to the strength of the hardened concrete is through the concept of the SCMs efficiency factor (i.e. k -value concept), which expresses the fraction of portland cement that can be replaced by a SCM at unchanged strength. In the literature some studies have also been focused on the use of the k -value approach also for the resistance against carbonation and chloride penetration of blended portland systems. However, limitations of applicability of SCMs efficiency factor to durability properties are not clear. In this paper the k -value of different SCMs, such as ground limestone, fly ash, natural pozzolan and ground granulated blastfurnace slag, was investigated to detect firstly if it can be applied to carbonation- and chloride-related properties and, secondly, if strength can be considered as a proxy-criterion for durability properties. Results showed k -values lower than 1 for all the SCMs with respect to compressive strength and that these values were valid also for resistance to penetration of carbonation. As far as the resistance to chloride penetration is concerned, k -values derived from strength tests were not applicable and specific k -values should be evaluated; values higher than 1 were calculated for fly ash and ground granulated blastfurnace slag, whilst values lower than 1 were obtained for ground limestone and natural pozzolan.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Aïtcin · 2011
2. Thomas · 2013
3. The design of fly ash concrete
4. Efficiency of fly ash in concrete10.1016/0958-9465(93)90025-5 ↗
5. Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress10.1016/S0008-8846(99)00249-5 ↗
6. Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance10.1016/j.cemconres.2004.05.051 ↗
7. Ground granulated blast furnace slag efficiency coefficient (k value) in concrete. Applications and limits10.3989/mc.2011.60410 ↗
8. Performance of BFS concrete: k-value concept versus equivalent performance concept10.1016/j.conbuildmat.2013.05.006 ↗
9. A strength definition for the water to cementitious materials ratio
10. Supplementary cementing materials in concrete. Part II: fundamental estimation of the efficiency factor10.1016/S0008-8846(02)00829-3 ↗
11. Efficiency of GGBS in concrete10.1016/S0008-8846(00)00271-4 ↗
12. Study and upgrade of supplementary materials for cement and concrete
13. Supplementary cementing materials in concrete. Part I: efficiency and design10.1016/S0008-8846(02)00827-X ↗
14. An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete10.1016/j.cemconres.2004.09.031 ↗
15. Durability and cementing efficiency of fly ash in concrete10.1016/j.conbuildmat.2011.12.026 ↗
16. Effect of fly ash on Portland cement system. Part I. Low-calcium fly ash10.1016/S0008-8846(99)00153-2 ↗
17. Effect of fly ash on Portland cement system. Part II. High-calcium fly ash10.1016/S0008-8846(00)00388-4 ↗
18. Effects of portland cement replacement with limestone on the properties of hardened concrete10.1016/j.cemconcomp.2013.10.016 ↗
19. F. Lollini, E. Redaelli, L. Bertolini, Investigation on the effect of supplementary cementitious materials on the critical chloride threshold of steel in concrete, Mater Struct., in press, http://dx.doi.org/10.1617/s11527-015-0778-0.10.1617/s11527-015-0778-0 ↗
20. Pozzolanic additions for durability of concrete structures10.1680/coma.1000041 ↗
21. Comparison of ground waste glass with other supplementary cementitious materials10.1016/j.cemconcomp.2013.09.005 ↗
22. Fagerlund · 2005
23. Neville · 1973
24. Bertolini · 2013
25. Performances based evaluation and indicators for concrete durability