Laboratory investigation of waste tire rubber and amorphous poly alpha olefin modified asphalt
Source abstract
Abstract
Abstract In recent years, waste tire rubber (WTR) has been widely used as an asphalt modifier, due to its good interaction with asphalt particles. Another modifier, amorphous poly alpha olefin (APAO) also gains popular interest from researchers because of its excellent miscibility with rubber, asphalt, and its remarkable aging resistance. This study aims at investigating the compound modification effect of WTR/APAO on the properties of asphalt binders. Their rheological features were measured through conventional and dynamic shear tests; low temperature performance was investigated by bending beam rheometer test; mixture stability was measured by storage stability test. The result of decreased penetration, increased softening point, elastic recovery, viscosity and complex modulus indicates that WTR/APAO compound modification improves the high temperature performance and rutting resistance of asphalt binders. Moreover the binders with additional incorporation of APAO obviously performed better than those modified with WTR alone, especially in storage stability. However, the modification effect of WTR and APAO on low temperature rheological properties of asphalt is unclear and controversial, as both creep stiffness and m-value decreased in the BBR test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers10.1016/j.conbuildmat.2016.02.069 ↗
2. Polymer modified asphalt
3. Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: a comparative analysis10.1016/j.jiec.2009.01.003 ↗
4. Rheological characterization of EVA and HDPE polymer modified bitumens under large deformation at 20°C10.1016/j.conbuildmat.2016.02.192 ↗
5. Rheological and chemical characteristics of rubberized binders with non-foaming warm mix additives10.1016/j.conbuildmat.2016.02.066 ↗
6. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
7. Application of waste tires rubber (WTR) modified asphalt
8. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive10.1016/j.conbuildmat.2010.06.087 ↗
9. Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders10.1016/j.conbuildmat.2007.12.005 ↗
10. A study of the durability properties of waste tire rubber applied to self-compacting concrete10.1016/j.conbuildmat.2012.11.019 ↗
11. Absorption of bitumen into crumb rubber using the basket drainage method10.1080/1029843032000158879 ↗
12. Reuse of deconstructed tires as anti-reflective cracking mat systems in asphalt pavements10.1016/j.conbuildmat.2013.11.101 ↗
13. Feasibility of Superpave gyratory compaction of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement10.1016/j.conbuildmat.2011.07.024 ↗
14. Recycling of waste tire rubber in asphalt and Portland cement concrete: an overview10.1016/j.conbuildmat.2013.11.027 ↗
15. Asphalt modified by thermoplastic elastomer based on recycled rubber10.1016/j.conbuildmat.2015.06.047 ↗
16. Surface modified ground rubber tire by grafting acrylic acid for paving applications10.1016/j.conbuildmat.2012.02.040 ↗
17. Study on the amorphous poly alpha olefin (APAO) modified asphalt binders10.1016/j.conbuildmat.2014.05.071 ↗
18. Tian · 2010
19. Rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders10.1016/j.conbuildmat.2013.07.087 ↗
20. F40, JTG · 2004 · 42
21. Project Final pr EN 12591 · 1998
22. D6373-99, ASTM · 1999
23. E20, JTG · 2011
24. D6114-97, ASTM · 2002
25. Whiteoak · 2003
26. Shen · 2001 · 125
27. D7175-15, ASTM, Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer, American Society for Testing and Materials.
28. Rheological properties of polyethylene and polypropylene modified bitumen
29. Viscosity, plasticity, and diffusion as examples of absolute reaction rates
30. Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene10.1016/j.conbuildmat.2015.02.092 ↗
31. Chemical and rheological characteristics of styrene-butadiene–styrene polymer-modified bitumens10.3141/1661-13 ↗
32. Analysis the influence factors of SBS modified asphalt rutting factor, China
33. MP1, AASHTO · 1994