Modeling and testing of road surface aggregate wearing behaviour
Source abstract
Abstract
Abstract The amount of urban dust and especially the particulate matter (PM) production is closely related to the wearing resistance of the aggregates on the road surface. In this research, the Aachen Polishing Machine (APM) was used to conduct wearing tests; the APM uses real vehicle tires. The obtained results were analysed with a rubber-road wearing model. Based on the spectral analysis of the texture, the wave length coinciding with the most wear of the specimen surface was identified. Findings show that the decrease of skid resistance can be ascribed to changes in the micro-texture up to 62.8 μm in the polishing test with the APM procedure. The final friction after polishing tests exhibits a positive correlation with the average hardness of the aggregate and the mass percentage of non-fissile mineral. A positive interdependence is observed for the quartz content whilst the calcite content exhibited a negative one. The average height induced by polishing is selected to determine and quantify the abrasion of aggregate. The results show a directly proportional relationship between the abrasion and the contact pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Brake Systems and Friction Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Influence of pavement macrotexture on PM10 emissions from paved roads: a controlled study10.1016/j.atmosenv.2012.09.018 ↗
2. The effect of air pollution control on life expectancy in the United States: an analysis of 545 US counties for the period 2000 to 200710.1097/EDE.0b013e3182770237 ↗
3. Air pollution and associated human mortality: the role of air pollutant emissions, climate change and methane concentration increases from the preindustrial period to present10.5194/acp-13-1377-2013 ↗
4. Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV), Merkblatt zur Bewertung der Straßengriffigkeit bei Nässe (M.B. Griff), Research Society for Roads and Transportation (FGSV), 2012.
5. Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV): Arbeitspapier Textureinfluss Auf Die Akustischen Eigenschaften Von Fahrbahndecken, Research Society for Roads and Transportation (FGSV), 2013, pp. 442.
6. Properties and toxicological effects of particles from the interaction between tyres, road pavement and winter traction material10.1016/j.scitotenv.2007.12.030 ↗
7. Factors influencing PM10 emissions from road pavement wear10.1016/j.atmosenv.2008.04.028 ↗
8. Factors affecting non-tailpipe aerosol particle emissions from paved roads: on-road measurements in Stockholm10.1016/j.atmosenv.2007.09.064 ↗
9. Experimental studies about the impact of traction sand on urban road dust composition10.1016/S0048-9697(02)00674-5 ↗
10. Size and composition of airborne particles from pavement wear, tires, and traction sanding10.1021/es035419e ↗
11. Kupiainen · 2007
12. Interfacial separation between elastic solids with randomly rough surfaces: comparison of experiment with theory10.1088/0953-8984/21/1/015003 ↗
13. Estimated short-term effects of coarse particles on daily mortality in Stockholm, Sweden10.1289/ehp.1103995 ↗
14. On the study of polishing of road surface under traffic load10.1061/(ASCE)0733-947X(2010)136:1(45) ↗
15. Relation between interfacial separation and load: a general theory of contact mechanics
16. Contact mechanics for randomly rough surfaces10.1016/j.surfrep.2006.04.001 ↗
17. On the nature of surface roughness with application to contact mechnics, sealing, rubber friction and adhesion10.1088/0953-8984/17/1/R01 ↗
18. The effect of mineralogy, texture and mechanical properties of anti-skid and asphalt aggregates on urban dust10.1007/s10064-003-0200-y ↗
19. The effect of mineralogy, texture and mechanical properties of anti-skid and asphalt aggregates on urban dust, stages II and III10.1007/s10064-004-0267-0 ↗
20. A contribution to non-contact skid resistance measurement10.1080/10298436.2014.943216 ↗
21. Umweltbundesamt · 2009
22. Effectiveness of preservation treatments on pavement surface friction10.1016/j.conbuildmat.2013.06.048 ↗
23. Influence of different polishing conditions on the skid resistance development of asphalt surface10.1016/j.wear.2013.09.013 ↗
24. Study of micro-texture and skid resistance change of granite slabs during the polishing with the Aachen Polishing Machine10.1016/j.wear.2014.06.005 ↗
25. Tire-road contact stiffness10.1007/s11249-014-0417-x ↗
26. Development of morphological properties of road surfacing aggregates during the polishing process
27. A study of the laboratory polishing behavior of granite as road surfacing aggregate10.1016/j.conbuildmat.2015.04.032 ↗
28. Evaluation of aggregate resistance to wear with micro-Deval test in combination with aggregate imaging techniques10.1016/j.wear.2015.07.002 ↗
29. B. Wehner, Straßengriffigkeit und Verkehrssicherheit bei Nässe, Forschungsergebnisse und Folgerungen, Internationales Colloquium über Straßengriffigkeit und Verkehrssicherheit bei Nässe, Berlin, 1968.
30. Contact mechanics: contact area and interfacial separation from small contact to full contact10.1088/0953-8984/20/21/215214 ↗