Application of wire beam electrode technique to investigate the migrating behavior of corrosion inhibitors in mortar
Source abstract
Abstract
Abstract The migration rate and inhibitive effect on rebar corrosion of migrating corrosion inhibitors (MCIs) in mortar were studied using wire beam electrode technique with high temporal and spatial resolution. The MCIs readily diffused through the mortar but exhibited preferential adsorption on the bare metal surfaces rather than on the rust layer on rebars. The ingress of MCIs in mortar increased the resistance on general corrosion much more than localized corrosion. This increase was mainly attributed to the sealing effect on mortar pores (pore-blocking effect) rather than on chemical absorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Corrosion inhibitors in reinforced concrete structures Part 3-migration of inhibitors into concrete10.1179/174327809X419230 ↗
2. Application of electrochemical organic corrosion inhibitor injection to a carbonated reinforced concrete railway viaduct10.1016/j.conbuildmat.2012.05.010 ↗
3. Corrosion protection of steel with DMEA-based organic inhibitor10.1016/j.conbuildmat.2013.03.030 ↗
4. Transport of a surface-applied corrosion inhibitor in cement paste and concrete10.1016/S0008-8846(02)01067-0 ↗
5. Phosphate ions as corrosion inhibitors for reinforcement steel in chloride-rich environments10.1016/j.electacta.2013.03.180 ↗
6. The effect of a surface-applied corrosion inhibitor on the durability of concrete10.1016/j.conbuildmat.2012.07.007 ↗
7. Investigations of an ethanolamine-based corrosion inhibitor system for surface treatment of reinforced concrete10.1002/maco.200303768 ↗
8. A study of organic substances as inhibitors for chloride-induced corrosion in concrete10.1016/j.corsci.2009.08.018 ↗
9. Effectiveness of surface-applied corrosion inhibitors for concrete bridges10.1061/(ASCE)MT.1943-5533.0000163 ↗
10. A migrating corrosion inhibitor evaluated in concrete containing various contents of admixed chlorides10.1016/S0008-8846(01)00669-X ↗
11. Critical chloride content in reinforced concrete – a review10.1016/j.cemconres.2009.08.006 ↗
12. Chloride induced reinforcement corrosion: electrochemical monitoring of initiation stage and chloride threshold values10.1016/j.corsci.2011.01.025 ↗
13. Electrochemical impedance spectroscopy for studying passive layers on steel rebars immersed in alkaline solutions simulating concrete pores10.1016/j.electacta.2007.02.012 ↗
14. K. Tuutti, Corrosion of Steel in Concrete, Swedish Cement and Concrete Research Institute, 1982.
15. Electrochemical techniques for determining corrosion rate of rusted steel in seawater10.1016/j.corsci.2010.09.011 ↗
16. The effect of a new generation surface-applied organic inhibitor on concrete properties10.1016/j.cemconcomp.2006.12.013 ↗
17. Corrosion inhibitors for chlorides induced corrosion in reinforced concrete structures10.1016/j.cemconres.2005.11.007 ↗
18. Multi-functional organic corrosion inhibitor10.1016/S0958-9465(03)00039-8 ↗
19. An overview of techniques for characterizing inhomogeneities in organic surface films and underfilm localized corrosion10.1016/j.porgcoat.2013.02.001 ↗
20. A new method of studying buried steel corrosion and its inhibition using the wire beam electrode10.1016/j.corsci.2004.04.010 ↗
21. The heterogeneous electrochemical characteristics of mild steel in the presence of local glucose oxidase – a study by the wire beam electrode method10.1016/j.corsci.2009.10.043 ↗
22. Application of wire beam electrode technique to investigate initiation and propagation of rebar corrosion10.1016/j.cemconres.2013.02.009 ↗
23. Novel corrosion experiments using the wire beam electrode: (II) Monitoring the effects of ions transportation on electrochemical corrosion processes10.1016/j.corsci.2004.11.020 ↗
24. Corrosion inhibitors in reinforced concrete structures Part 2 – repair system10.1179/174327806X111234 ↗
25. Investigation of the early effectiveness of an amino-alcohol based corrosion inhibitor using simulated pore solutions and mortar specimens10.1016/j.cemconcomp.2007.05.007 ↗
26. Novel corrosion experiments using the wire beam electrode. (I) Studying electrochemical noise signatures from localised corrosion processes10.1016/j.corsci.2004.11.019 ↗
27. Monitoring pitting-crevice corrosion using the WBE-noise signatures method10.1002/maco.200503946 ↗
28. Rebar corrosion in carbonated concrete exposed to variable humidity conditions. Interpretation of Tuutti's curve10.1016/j.corsci.2009.04.029 ↗
29. Comparison between surface and bulk hydrophobic treatment against corrosion of galvanized reinforcing steel in concrete10.1016/j.cemconres.2011.03.011 ↗
30. Assessment of water absorption and chloride ion penetration of pavement quality concrete admixed with wollastonite and microsilica10.1016/j.conbuildmat.2008.06.011 ↗
31. Steel corrosion in concrete: determinist modeling of cathodic reaction as saturation a function of water degree10.1016/j.corsci.2006.10.005 ↗
32. Factors affecting the corrosion rate of steel in carbonated mortars10.1016/0010-938X(91)90048-T ↗
33. Effect of calcium nitrite-based corrosion inhibitor in preventing corrosion of embedded steel in concrete10.1016/j.cemconres.2005.09.003 ↗
34. Corrosion inhibitors for steel in concrete: state-of-the-art report10.1016/j.conbuildmat.2006.10.013 ↗
35. Migrating corrosion inhibitor blend for reinforced concrete: Part 2 – inhibitor as repair strategy10.5006/1.3280576 ↗
36. Phenomena disturbing electrochemical corrosion rate measurements for steel in alkaline environments10.1016/S0013-4686(01)00677-6 ↗
37. Electrochemical behavior of enamel-coated carbon steel in simulated concrete pore water solution with various chloride concentrations10.1016/j.electacta.2012.12.125 ↗
38. Study on the corrosion behavior of reinforcing steel in simulated concrete pore solutions using in situ Raman spectroscopy assisted by electrochemical techniques10.1016/j.electacta.2010.05.003 ↗
39. Determination of a nitrite-based corrosion inhibitor in plastic and hardened concrete
40. In situ leaching investigation of pH and nitrite concentration in concrete pore solution10.1016/S0008-8846(98)00224-5 ↗
41. Natural marine exposure results for reinforced concrete slabs with corrosion inhibitors10.1016/S0958-9465(02)00088-4 ↗
42. Initiation and repassivation of pitting corrosion of carbon steel in carbonated concrete pore solution10.1016/j.corsci.2010.12.028 ↗
43. The role of inhibitors on the repassivation of pitting corrosion of carbon steel in synthetic carbonated concrete pore solution10.1016/j.electacta.2011.04.120 ↗
44. On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion10.1016/j.corsci.2010.03.025 ↗