Numerical modelling of FRP-reinforced masonry walls under in-plane seismic loading
Source abstract
Abstract
Abstract This paper describes the development of finite element (FE) models for the study of the behaviour of unreinforced and basalt fibre reinforced polymer (BFRP) externally reinforced masonry walls under the action of in-plane seismic loading. Validated against experimental tests, the FE models were used to accurately predict the shear strength and reflect damage progression in multi-leaf masonry walls under in-plane cyclic loading, including the propagation of cracks beneath the BFRP reinforcement. The models have the potential to be used in practice to predict the behaviour and shear capacity of unreinforced and FRP-reinforced masonry walls.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Strengthening of masonry structures using epoxy-bonded FRP laminates10.1061/(ASCE)1090-0268(1998)2:2(96) ↗
2. Fiber-reinforced composites for the strengthening of masonry structures10.2749/101686603777964360 ↗
3. In-plane shear performance of masonry panels strengthened with FRP10.1016/j.compositesb.2006.11.004 ↗
4. L. Xu, S. Zhang, X. Hu, M. Zhang, Seismic responses of masonry structures strengthened with FRP laminates: a shaking-table study, in: 15 WCEE Proceedings, Lisboa, 2012.
5. In-plane behavior of seismically damaged masonry walls repaired with external BFRP10.1016/j.compstruct.2013.01.031 ↗
6. Experimental response of externally retrofitted masonry walls subjected to shear loading10.1061/(ASCE)1090-0268(2008)12:5(489) ↗
7. A. Mandara, D. Scognamiglio, Prediction of collapse behavior of confined masonry members with ABAQUS, in: Proc of the ABAQUS Users’ Conference, Munich, 2003.
8. Explicit finite-element analysis for the in-plane cyclic behavior of unreinforced masonry structures10.1002/eqe.1014 ↗
9. Explicit finite element analysis of lightly reinforced masonry shear walls10.1016/j.compstruc.2007.06.006 ↗
10. Effect of in-plane damage on out-of-plane strength of unreinforced masonry walls10.1016/j.engstruct.2013.09.004 ↗
11. Modelling of historical masonry structures: comparison of different approaches through a case study10.1016/S0141-0296(02)00033-0 ↗
12. Load resistance of masonry wallettes and shear triplets retrofitted with GFRP composites10.1016/j.cemconcomp.2007.11.005 ↗
13. A coupled homogenisation-damage model for masonry cracking10.1016/j.compstruc.2004.02.020 ↗
14. Mechanics of masonry in compression: results from a homogenisation approach10.1016/j.compstruc.2006.08.054 ↗
15. A micro-mechanical homogenisation model for masonry: application to shear walls10.1016/j.ijsolstr.2008.09.034 ↗
16. Homogenization methods for interface modeling in damaged masonry10.1016/j.advengsoft.2010.09.009 ↗
17. The performance of unreinforced masonry walls subjected to low-velocity impacts: finite element analysis10.1016/j.ijimpeng.2006.08.004 ↗
18. 3D upper bound limit analysis of multi-leaf masonry walls10.1016/j.ijmecsci.2007.11.003 ↗
19. Xiong · 2012
20. Łodygowski · 2009
21. Study on in-plane seismic performance of solid masonry-infilled RC frames
22. A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures10.1016/j.compstruc.2013.01.012 ↗
23. Identification of material parameters for low bond strength masonry10.1016/j.engstruct.2013.12.013 ↗
24. Evaluation of different computational modelling strategies for the analysis of low strength masonry structures10.1016/j.engstruct.2014.05.007 ↗
25. Discrete element modeling of masonry structures10.1080/15583050601176868 ↗
26. Shear strengthening of masonry walls with FRP composites
27. T. Diehl, Modeling surface-bonded structures with ABAQUS cohesive elements: beam-type solutions, in: ABAQUS User’s Conference, Stockholm, Sweden, 2005.
28. Modelling the failure of thin layered mortar joints in masonry10.1016/j.engstruct.2012.12.017 ↗
29. Parametrical study of masonry walls subjected to in-plane loading through numerical modeling10.1016/j.engstruct.2011.01.015 ↗
30. A non-linear interface element for 3D mesoscale analysis of brick-masonry structures10.1002/nme.3046 ↗
31. Finite element modelling of complex 3D static and dynamic crack propagation by embedding cohesive elements in Abaqus10.1016/S0894-9166(10)60030-4 ↗
32. Abaqus, Uer's Manual. Version 610.
33. Abaqus, Guidelines for Determining Finite Element Cohesive Material Parameters.
34. K. Song, Guidelines and parameter selection for the simulation of progressive delamination, in: 2008 Abaqus Users’ Conference, 2008.
35. Constitutive relationship model for masonry materials
36. Zhen · 2010
37. Z. Li, Damage Mechanics and Applications, Science Press, Beijing, 2002 (in Chinese).
38. 1999 GT, Test Method for Tensile Properties of Oriented Fiber Reinforced Plastics, The Department of Supervision on Quality and Technology, Beijing, 1999 (in Chinese).
39. 2011 G, Code for Design of Masonry Structures, Chinese Architectural Industry Press, Beijing, 2002 (in Chinese).
40. GB50608-2010, Technical Code for Infrastructure Application of FRP Composites, Ministry of Construction of the People's Republic of China, Beijing, 2011 (in Chinese).
41. M. Tomazevic, Earthquake-resistant Design of Masonry Buildings, World Scientific Publishing Company, 1999.10.1142/p055 ↗
42. Q. Wang, A Seismatic Shear Strength of Unreinforced Masonry, in: Research Symposium of Masonry Structure Changsha, Hunan University Press, 1989, p. 103–15 (in Chinese).
43. Numerical investigation of FRP-strengthened tubular T-joints under axial compressive loads10.1016/j.compstruct.2012.12.020 ↗
44. Finite element modeling of the shear capacity of RC beams strengthened with FRP sheets by considering different failure modes10.1016/j.conbuildmat.2014.02.044 ↗
45. Parametric study of nonlinear static and dynamic response of composite rectangular plates10.1016/0093-6413(88)90027-4 ↗
46. BS EN 1996-1-1: 2005 Eurocode 6, Design of masonry structures—general rules for reinforced and unreinforced masonry structures.
47. FRP-retrofitted URM walls under in-plane shear: review and assessment of available models10.1061/(ASCE)CC.1943-5614.0000135 ↗
48. Assessment of design formulas for in-plane FRP strengthening of masonry walls10.1061/(ASCE)1090-0268(2008)12:6(643) ↗
49. Numerical investigation on the influence of FRP retrofit layout and geometry on the in-plane behavior of masonry walls10.1061/(ASCE)CC.1943-5614.0000297 ↗