journal article·2017-06

Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS

Jiupeng Zhang, Cunzhen Zhu, Xueqian Li, Jianzhong Pei, Jun Chen

Publisher page

Abstract

Abstract A reliable UMAT subroutine of selected constitutive model of asphalt mixture is developed and applied to characterize the three-stage rutting behavior of asphalt pavement by using ABAQUS. It is indicated that the heavier traffic load not only induces the greater rutting depth, but also accelerates the rutting rate, causing the pavement earlier enter into rutting failure with shortened service life. The damage evolution and axle-load conversion are further discussed. Results show that the pavement subjected to heavier axle loads has the greater damage and faster damage evolution. The axle-load conversion index is 5.97 according to rut equivalence principle.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Y. Zhao, L. Jiang, L. Zhou, Temperature and vehicle loading effects on asphalt concrete pavement rutting development, in: Proceeding of 5th International Conference on Transportation Engineering, ICTE 2015, 2015, pp. 1084–1091.10.1061/9780784479384.136 ↗
2. X. Teng, X. Li, K. Chou, Application of finite element analysis to access the rutting potential in asphalt pavements, in: Transportation and Development Innovative Best Practices 2008, 2008, pp. 480–485.10.1061/40961(319)79 ↗
3. Analysis of rutting change rule on asphalt pavement overlay10.4028/www.scientific.net/AMR.368-373.3131 ↗
4. S. Pirabarooban, M. Zaman, R.A. Tarefder, Evaluation of rutting potential in asphalt mixes using finite element modeling, in: Proceedings of the Transportation Facto 2003, Annual Conference and Exhibition of the Transportation Association of Canada, 2003.
5. K. Xia, Finite element modeling of dynamic tire/pavement interaction, in: Proceedings of the Pavements and Materials: Characterization and Modeling Symposium, 2010, pp. 204–214.10.1061/41129(385)18 ↗
6. Rutting resistance ability analysis of heavy duty asphalt pavements based on consecutive temperature variation and finite element method
7. Based on FE method to research resistant rutting ability of pavement structure in Heilongjiang province10.4028/www.scientific.net/AMM.128-129.1349 ↗
8. Mechanical analysis on rutting resistance in asphalt pavement
9. Rutting performance of rubberized porous asphalt using Finite Element Method (FEM)10.1016/j.conbuildmat.2015.12.134 ↗
10. Three-dimensional modelling of multilayered asphalt concrete pavement structures: strain responses and permanent deformation
11. Numerical simulation of indirect tensile tests of asphalt mixtures
12. A study of nonlinear tire contact pressure effects on HMA rutting10.1061/(ASCE)1532-3641(2002)2:3(353) ↗
13. M.W. Witczak, K. Kaloush, T. Pellinen, et al., Simple performance test for Superpave mix design, NCHRP Report 465. Washington, D.C., National Academy Press, 2002.
14. R.D. Barksdale, Laboratory evaluation of rutting in base course materials, in: Proceedings of the 3rd International Conference on the Structural Design of Asphalt Pavements, 1972, pp. 161–174.
15. Permanent deformation characterization of subgrade soils due to repeated loading
16. Federal Highway Administration, VESYS user’s manual: predictive design procedures, 1977.
17. R.L. Lytton, J. Uzan, E.G. Fernando, et al. Development and validation of performance prediction models and specifications for asphalt binders and paving mixes, Report No. SHRP-A-357, Strategic Highway Research, National Research Program Council, Washington, D.C., 1993.
18. American Association of State Highway and Transportation Officials, AASHTO Guide for Pavement Design of Pavement Structures, 2002.
19. K.H. Tseng, R.L. Lytton, Prediction of permanent deformation in flexible pavement material, in: Implication of Aggregates in the Design, Construction, and Performance of Flexible Pavements, ASTM STP 1016, 1989, pp. 154–172.10.1520/STP24562S ↗
20. Finite element modelling for prediction of permanent strains in fine-grained subgrade soils10.1080/14680629.2015.1013053 ↗
21. Numerical simulation techniques for HMA rutting under loaded wheel tester10.1080/10298430500068704 ↗
22. Using of 2D finite element modeling to predict the glasphalt mixture rutting behavior10.1016/j.conbuildmat.2014.06.057 ↗
23. Numerical study of the benefits of geogrid base reinforcement on the rutting performance of flexible pavements
24. A. Mwanza, P. Hao, M. Muya, et al., Evaluation of permanent deformation in asphalt overlays using default finite element tools in ABAQUS, in: Proceeding of Geo-Hubei 2014 International Conference on Sustainable Civil Infrastructure, 2014, pp. 59–66.10.1061/9780784478462.008 ↗
25. Nonlinear viscoelastic approach to model damage-associated performance behavior of asphaltic mixture and pavement structure10.1139/cjce-2012-0289 ↗
26. A modified viscoplastic model to predict the permanent deformation of asphaltic materials under cyclic-compression loading at high temperatures10.1016/j.ijplas.2012.03.001 ↗
27. M.W. Witczak, K. Kaloush, Simple performance test for Superpave mix design, NCHRP Report 465, National Research Council, Washington, D.C., 2001.
28. Verification and modeling of three-Stage permanent deformation behavior of asphalt mixes10.1061/(ASCE)0733-947X(2004)130:4(486) ↗
29. Permanent deformation of asphalt mixture under repeated load
30. Viscoelastoplastic-damage mechanics model of permanent deformation in asphalt mixture
31. Damage characteristic of asphalt mixture by permanent deformation test
32. Development and validation of nonlinear viscoelastic damage (NLVED) model for three-stage permanent deformation of asphalt concrete10.1016/j.conbuildmat.2015.10.201 ↗
33. Nonlinear viscoelastic model for asphalt mixture subjected to repeated loading10.1080/14680629.2015.1137781 ↗
34. Ministry of Transport of the People's Republic of China · 2004
35. Temperature, axle load and axle load frequency model of rutting prediction of heavy-duty asphalt pavement
36. J.C. Ronald, The Superpave mix design manual for new construction and overlays, Report No. SHRP-A-407, Strategic Highway Research, National Research Program Council, Washington, D.C., 1994.
37. Li · 2006
38. HKS · 2002
39. Asphalt pavement short-term rutting analysis and prediction considering temperature and traffic loading conditions
40. Huang · 2004
41. Conversion of axle load by deflection equivalence for asphalt pavement under heavy loads
42. Study of transverse distribution of asphalt pavement rutting for highway