Evaluation of spent diatomite incorporation in clay based materials for lightweight bricks processing
Source abstract
Abstract
In this study, diatomaceous earth residues from two industrial processes, refining of vegetable oils and brewing, have been used as raw materials for brick making. The aim has been to substitute part of the clay traditionally used for the manufacturing of bricks, between 3 and 10 wt.%, with the aforementioned residues, so obtaining ceramic pieces at three firing temperatures: 850, 950 and 1050 C. The studied properties were compared with those of conventional materials (100% clay), and the results show that these alternative raw materials can be considered technological ‘‘nutrients” whose addition improves the behaviour of the materials in the drying process. The incorporation of these materials also increases the open porosity of the fired pieces and reduces the bulk density by up to 10%. The increase in porosity is greater in materials that incorporate diatomites from oil filtration, reaching the maximum value (37 vol.%). These results are confirmed from the microstructure observed by SEM. With regard to mechanical properties, increasing the content of both residues generally decreases the bending strength to values exceeding 10 MPa, thus resulting admissible for use in construction. Moreover, the energy release from the residues during the firing stage is greater than the energy demand required for drying, while the ther-mal conductivity values of the final materials decreases with the amount of residue, which confers ther-mal insulating properties to the ceramic pieces and thus can reduce the energy consumption of buildings
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Hierarchically porous ceramics from diatomite powders by pulsed current processing10.1111/j.1551-2916.2008.02882.x ↗
2. Microcolumn studies of dye adsorption onto manganese oxides modified diatomite10.1016/j.jhazmat.2006.12.024 ↗
3. Adsorption of methylene blue by acid and heat treated diatomaceous silica10.1016/j.desal.2007.03.003 ↗
4. Properties of fired clay bricks with incorporated biomasses: cases of olive stone flour and wheat straw residues10.1016/j.conbuildmat.2015.10.040 ↗
5. Synthesis of Si3N4 by the carbo-thermal reduction and nitridation of diatomite10.1016/S0955-2219(03)00038-4 ↗
6. Drying and Kilns
7. Acción del calor sobre las materias primas
8. Management of agricultural biomass wastes: preliminary study on characterization and valorization in clay matrix bricks10.1016/j.wasman.2013.03.014 ↗
9. Development of eco-friendly porous fired clay bricks using pore-forming agents: a review10.1016/j.jenvman.2014.05.006 ↗
10. Braungart · 2002
11. S. Bueno, J. Álvarez de Diego, Estudio de Caracterización Tecnológica de Materias Primas Cerámicas, Fundación Innovarcilla. http://www.innovarcilla.es/documentos/guiasman/es-Estudio%20de%20Caracterizacion.pdf (accessed 15/05/16) (2008).
12. Obtención de espumas a partir de residuos de pizarra10.3989/cyv.2005.v44.i6.330 ↗
13. Canales · 2005
14. Diatomite
15. Valorization of pellets from municipal WWTP sludge in lightweight ceramics10.1016/j.wasman.2011.02.003 ↗
16. Dirección General de Desarrollo Minero · 2013
17. Recycling PC and TV waste glass in clay bricks and roof tiles Original Research Article10.1016/j.wasman.2008.12.003 ↗
18. Eco-Innovation Observatory · 2011
19. Improvement in filtration characteristics of diatomite by calcination10.1016/j.minpro.2010.02.004 ↗
20. The use of different forms of waste in the manufacture of ceramic bricks10.1016/j.clay.2011.03.003 ↗
21. Utilisation of spent filtration earth or spent bleaching earth from the oil refinery industry in clay products10.1016/j.ceramint.2014.08.030 ↗
22. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete10.1016/j.conbuildmat.2010.07.002 ↗
23. ESHORIZONTE 2020. Portal español del Programa Marco de Investigación e Innovación de la Unión Europea. http://www.eshorizonte2020.es/ (accessed 29.02.16).
24. B. Fabbri, M. Dondi, Resistenza Mecanica, in: Caratteristiche e difetti del laterizio. Gruppo Editoriale Faenza Editrice SPA (1995), pp. 77.
25. Fabbri B., Dondi M., 1995. Elementi per muratura comune, in: La produzione del laterizio in Italia. Gruppo Editoriale Faenza Editrice SPA, pp. 19.
26. Use of X-ray tomography to study the porosity and morphology of granules10.1016/S0032-5910(03)00043-3 ↗
27. Use of new raw materials and industrial wastes to improve the possibilities of using ceramic materials from Bailén (Jaén. Southern Spain)10.3989/mc.2012.03412 ↗
28. Influence of waste addition on the porosity of clay-based ceramic membranes10.1080/19443994.2015.1017011 ↗
29. Thermal conductivity of traditional ceramics. Part II: Influence of mineralogical composition10.1016/j.ceramint.2010.05.013 ↗
30. Thermal conductivity of traditional ceramics. Part I: Influence of bulk density and firing temperature10.1016/j.ceramint.2010.05.012 ↗
31. New uses for brick-making clay materials from the Bailén area (Southern Spain)10.1180/000985598545750 ↗
32. Porous clay bricks manufactured with rice husks10.1016/j.conbuildmat.2012.09.110 ↗
33. Elaboration and characterization of new mesoporous materials from diatomite and charcoal10.1016/j.micromeso.2007.01.053 ↗
34. Characterization of ceramic bricks incorporated with textile laundry sludge10.1016/j.ceramint.2011.08.015 ↗
35. Remediation of wastewater containing heavy metals using raw and modified diatomite10.1016/j.cej.2003.11.029 ↗
36. Lightweight bricks manufactured from water treatment sludge and rice husks Original Research Article
37. Water retention characteristics of porous ceramics produced from waste diatomite and coal fly ash10.7763/JOCET.2013.V1.48 ↗
38. Effects of recycled glass substitution on the physical and mechanical properties of clay bricks10.1016/j.wasman.2009.05.015 ↗
39. Lu · 1998 · 209
40. Preparation of filter aids based on diatomites10.1016/j.minpro.2006.05.006 ↗
41. of olive mill wastewater by its incorporation in building bricks10.1016/j.jhazmat.2008.01.104 ↗
42. J.L. Mesa Rueda, Propiedades Térmicas de metales, cerámicas y polímeros, https://www.yumpu.com/es/document/view/15255658/tema-10-pagina-personal-de-jose-luis-mesa-rueda/2 (accessed 18.06.16).
43. Oily diatomite and galvanic wastes as raw materials for red ceramics fabrication10.1016/j.conbuildmat.2012.11.041 ↗
44. Effect of oily waste addition to clay ceramic10.1016/j.ceramint.2004.05.002 ↗
45. On the production of fired clay bricks from waste materials: a critical update10.1016/j.conbuildmat.2014.07.006 ↗
46. Natural diatomite process for removal of radioactivity from liquid waste10.1016/j.apradiso.2006.08.012 ↗
47. Tyumen clays in the production of building ceramic10.1007/s10717-016-9787-x ↗
48. J.C. Placitelli, Techos verdes para reverdecer las ciudades. Ecohabitar. 34. http://www.ecohabitar.org/techos-verdes-para-reverdecer-las-ciudades (accessed 12.05.16), 2012.
49. Preparation and mechanism of ultra-lightweight ceramics produced from sewage sludge10.1016/j.jhazmat.2009.11.001 ↗
50. Development of sustainable construction material using industrial and agricultural solid waste: a review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
51. The use of the powder marble by-product to enhance the properties of brick ceramic10.1016/j.conbuildmat.2006.05.029 ↗
52. Sánchez-Muñoz L., Carda Castelló J.B., 2003. Transformaciones con la temperatura, in: Materias primas y aditivos cerámicos. Enciclopedia Cerámica. Tomo 2.2, Faenza Editrice Ibérica S.L., Castellón, pp. 88–120.
53. Thermal evolution of the mechanical properties of calcareous earthenware10.1016/j.ceramint.2013.07.067 ↗
54. Mechanical properties of ceramic bodies based on calcite waste10.1016/j.ceramint.2012.05.046 ↗
55. Thermal performance optimization of hollow clay bricks made up of paper waste10.1016/j.enbuild.2014.02.006 ↗
56. The use of polystyrene in lightweight brick production
57. Production of bricks from waste materials – a review10.1016/j.conbuildmat.2013.05.043 ↗
58. Sintering kinetics of porous ceramics from natural diatomite10.1111/j.1551-2916.2005.00288.x ↗