Effects of nano-particles on improvement in wear resistance and drying shrinkage of road fly ash concrete
Source abstract
Abstract
Abstract Nano-materials have been widely applied in cement-based materials due to its excellent performance. Two types of nano-particles, namely nano-SiO 2 (NS) and nano-SiC (NC), were employed to prepare nano-modified fly ash cement mortar and road fly ash concrete specimens respectively, and the effects of the nano-particles content on wear resistance and drying shrinkage were studied on the basis of strength test, the mechanisms were then analyzed theoretically. The results indicated that nano-particles could improve the wear resistance of road fly ash concrete, but increase the drying shrinkage. The optimum added dosage of NS for single-doping NS concrete was 2%, and that for NC was 3%. The superior wear resistance of nano double-doped concrete could be found with 2% NS and 2% NC, and meanwhile, the wear loss was only 0.64 kg/m 2 , with a decrease by 75%; the drying shrinkage rate of the concrete containing 2% NS and 2% NC at 28 d was increased by 124.8% and 85.8%, respectively, compared to the reference concrete. Therefore, it is concluded that due to its surface effect, pozzolanic reaction and microscopic aggregate filling effect, nano-particles have larger surface energy, to change the orientation degree of calcium hydroxide crystals in the interface transition zone and fill pores among cementitious materials, thereby improving the wear resistance and drying shrinkage of fly ash concrete. These results would provide guidance on the design of the high wear resistance and low drying shrinkage fly ash concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Influences of nano-TiO2 on the properties of cement-based materials: hydration and drying shrinkage10.1016/j.conbuildmat.2015.02.003 ↗
2. The effects of TiO2 nanoparticles on physical, thermal and mechanical properties of concrete using ground granulated blast furnace slag as binder10.1016/j.msea.2010.11.070 ↗
3. Influence of Al2O3 nanoparticles on the compressive strength and workability of blended concrete
4. The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete10.1016/j.compositesb.2010.09.025 ↗
5. The effects of lime solution on the properties of SiO2 nanoparticles binary blended concrete10.1016/j.compositesb.2010.10.002 ↗
6. Abrasion resistance of concrete containing nano-particles for pavement10.1016/j.wear.2005.08.006 ↗
7. Pore structure and chloride permeability of concrete containing nano-particles for pavement10.1016/j.conbuildmat.2010.07.032 ↗
8. Flexural fatigue performance of concrete containing nano-particles for pavement10.1016/j.ijfatigue.2006.10.004 ↗
9. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
10. Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag10.1016/j.conbuildmat.2011.11.013 ↗
11. Influences of nano-particles on dynamic strength of ultra-high performance concrete10.1016/j.compositesb.2016.01.044 ↗
12. Effects of nano-SiO2 particles on the mechanical and microstructural properties of ultra-high performance cementitious composites10.1016/j.cemconcomp.2014.11.001 ↗
13. Strength and durability of high performance road concrete containing ultra-fine fly ash
14. P.C. Itcin Non-shrinking concrete, in: CANMET/ACI/JCI 4th International Concrete on Recent Advances in Concrete Technology, 1998, 6, pp. 3–63.
15. Influence of superlasticizer, plasticizer, and silica fume on the drying shrinkage of High-strength concrete subjected to hot-dry field conditions10.1016/S0008-8846(98)00102-1 ↗
16. Eight-year exploration of shrinkage in high-performance concrete10.1016/S0008-8846(02)00764-0 ↗
17. R.D. Hooton, K. Stanish, Pursinski. The effect of granulated blast furnace slag (slag cement) on the drying shrinkage of concrete-a critical review of the literature, in: Eighth CANMENT/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, 2004.
18. Shrinkage of self-compacting concrete made with blast furnace slag as fine aggregate10.1016/j.conbuildmat.2014.11.029 ↗
19. Moisture transport and drying shrinkage properties of steel-fibre-reinforced-concrete10.1016/j.conbuildmat.2014.09.039 ↗
20. The effect of nano silica on short term drying shrinkage of POFA cement mortars10.1016/j.conbuildmat.2015.07.132 ↗
21. Test Methods of Cement and Concrete for Highway Engineering JTG/E30-2005, China Communications Press, Beijing, 2002 (in Chinese).