journal article·2017-11

Development of Stress Sweep Rutting (SSR) test for permanent deformation characterization of asphalt mixture

Dahae Kim, Y. Richard Kim

Publisher page

Abstract

Abstract The goal of this work is to develop a simple rutting test method, referred to as the Stress Sweep Rutting (SSR) test, which can be used to calibrate a permanent deformation model, known as the shift model, of asphalt mixtures. The effect of each shift model parameter, i.e., temperature, deviatoric stress, load time, and rest period, on permanent deformation has been explored and evaluated in an effort to minimize the test requirements of the rutting characterization. The accuracy of the SSR test method was evaluated using the Layered ViscoElastic pavement analysis for Critical Distresses (LVECD) program by predicting the permanent deformation and compared to the Triaxial Stress Sweep (TSS) method, which was originally developed to calibrate the shift model. The rut depths predicted from the SSR and TSS method using the LVECD program are in close agreement, thereby verifying the SSR test method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Accelerated Laboratory Rutting Tests: Evaluation of the Asphalt Pavement Analyzer, NCHRP 508, Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Washington, D.C., 2003.
2. American Association of State Highway Transportation Officials (AASHTO). AASHTO TP63: Determining the Rutting susceptibility of Hot Mix Asphalt using the Asphalt Pavement Analyzer (APA), Washington, D.C., 2009.
3. American Association of State Highway Transportation Officials (AASHTO). AASHTO T 324: Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA), Washington, D.C., 2010.
4. American Association of State Highway Transportation Officials (AASHTO). AASHTO T320, Determining the Permanent Shear strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST), Washington, D.C., 2011.
5. Simple Performance Test for Superpave Mix Design. NCHRP Report 465, Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Washington, D.C., 2002.
6. Estimating the Rutting Potential of Asphalt Mixtures Using Superpave Gyratory Compaction Properties and Indirect Tensile Strength
7. American Association of State Highway Transportation Officials (AASHTO). AASHTO TP79-15, Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT), Washington, D.C., 2015.
8. Permanent Deformation Characterization of Asphalt Mixture Using Incremental Repeated Load Testing10.3141/2373-14 ↗
9. Development of Calibration Testing Protocol for Permanent Deformation Model of Asphalt Concrete
10. Implementation and verification of a mechanistic permanent deformation model (shift model) to predict rut depths of asphalt pavement
11. M. Eslaminia, S. Thirunavukkarasu, M.N. Guddati, Y.R. Kim, Accelerated pavement performance modeling using layered viscoelastic analysis, in: Proceedings of the 7th International RILEM Conference on Cracking in Pavements, 2012, Delft, the Netherlands.10.1007/978-94-007-4566-7_48 ↗
12. 2 Design Guide: Design of New and Rehabilitated Pavement Structures. NCHRP 1-37A Project, Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Washington, D.C., 4.
13. Choi · 2013
14. American Association of State Highway Transportation Officials (AASHTO). AASHTO PP 60: Practice For Preparation of Cylindrical Performance Test Specimens Using The Superpave Gyratory Compactor (SGC), Washington, D.C., 2013.
15. Mohseni · 2014
16. Simulation of tire-pavement interaction for predicting contact stresses at static and various rolling conditions
17. Determination of pneumatic tire pavement interface contact stresses under moving loads and some effects on pavements with thin asphalt surfacing layers
18. D. Kim, Modulus and Permanent Deformation Characterization of Asphalt Mixtures and Pavements, North Carolina State University, Raleigh, NC, 2015. Ph.D. dissertation.
19. Project 9-30A, Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Washington, D.C., 2012.