journal article·2018-02

Influence of selected parameters on compressive strength of geopolymer produced from ground glass fiber

Hassan Rashidian-Dezfouli, Prasada Rao Rangaraju, Venkat Sai Kumar Kothala

Publisher page

Abstract

Abstract In this study, ground glass fiber (GGF), manufactured by milling waste glass fiber, was used to produce geopolymer mixtures. The effect of using different alkali content and different combinations of alkali activator solutions on the compressive strength and micro-structure of GGF-based geopolymer mixtures were investigated and compared with fly ash-based geopolymer mixtures. Furthermore, the effect of temperature (from ambient to 110 °C) and duration of heat-curing on the compressive strength and micro-structure of GGF-based geopolymers was studied. Results of this study showed that for all the levels of alkali content, GGF-based geopolymers showed a higher compressive strength in comparison to the fly ash-based specimens; prepared with a same solution and heat-curing method. It was also seen that the strength gain in GGF-based geopolymers does not depend on the presence of sodium silicate in the activator solution; and high compressive strength (as high as 80 MPa) can be achieved by using sodium hydroxide solution alone. The temperature of heat curing was also seen to affect the early-age (i.e. 3–7 days) strength of the GGF-based samples, but had no significant effect on the later-age (i.e. 28–56 days) strength. Finally, it was concluded that GGF has a good potential to be used as a precursor to produce high strength geopolymers even at the low curing temperatures as the ambient temperature (23 °C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Life-cycle analysis of geopolymers
2. The influence of calcium content on the structure and thermal performance of fly ash based geopolymers10.1007/s10853-006-0532-7 ↗
3. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
4. Z. Li, Z. Ding, Y. Zhang, Development of sustainable cementitious materials, in: Proceedings of international workshop on sustainable development and concrete technology, Beijing, China, 2004, pp. 55–76.
5. Geopolymerisation: a review and prospects for the minerals industry10.1016/j.mineng.2007.07.011 ↗
6. Bašcarevic · 2014 · 373
7. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
8. J.T. Gourley, G.B. Johnson, Developments in geopolymer precast concrete, in: World Congress Geopolymer, 2005, pp. 139–143.
9. D. Cheema, N. Lloyd, B.V. Rangan, Durability of geopolymer concrete box culverts-A green alternative, in: Proceedings of 34th Conference on Our World in Concrete and Structures, CI Premier Pty Ltd., 2009, pp. 85–92.
10. Factors influencing the compressive strength of fly ash-based geopolymer concrete
11. An overview on the potential of geopolymers for concrete infrastructure rehabilitation10.1016/j.conbuildmat.2012.07.003 ↗
12. Concrete retrofitting using metakaolin geopolymer mortars and CFRP10.1016/j.conbuildmat.2011.03.006 ↗
13. Fire-resistant geopolymer produced by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
14. Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings10.1016/j.jnoncrysol.2010.09.063 ↗
15. Potential application of geopolymers as protection coatings for marine concrete: II. Microstructure and anticorrosion mechanism10.1016/j.clay.2010.04.024 ↗
16. Effect of sodium hydroxide concentration on chloride penetration and steel corrosion of fly ash-based geopolymer concrete under marine site10.1016/j.conbuildmat.2014.04.010 ↗
17. Effect of sodium silicate to sodium hydroxide ratios on strength and microstructure of fly ash geopolymer binder10.1007/s13369-014-1093-8 ↗
18. The characterisation of source materials in fly ash-based geopolymers10.1016/S0167-577X(02)00971-0 ↗
19. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
20. Strength characteristics of geopolymer concrete containing recycled concrete aggregate
21. Geopolymers prepared from DC plasma treated air pollution control (APC) residues glass: properties and characterisation of the binder phase10.1016/j.jhazmat.2011.08.081 ↗
22. Synthesis of geopolymer from spent FCC: Effect of SiO2/Al2O < 3 and Na2O/SiO2 molar ratios10.3989/mc.2015.00814 ↗
23. The effect of different parameters on the development of compressive strength of oil palm shell geopolymer concrete10.1155/2014/898536 ↗
24. Possibilities of reusing sugar cane straw ash in the production of alternative binders
25. Waste glass powder-based alkali-activated mortar
26. Comparison of strength and durability characteristics of a geopolymer produced from fly ash, ground glass fiber and glass powder10.3989/mc.2017.05416 ↗
27. Mechanical and durability properties of alkali-activated mortar based on sugarcane bagasse ash and blast furnace slag10.1016/j.ceramint.2015.07.001 ↗
28. Sulphate resistance of geopolymer concrete prepared from blended waste fuel ash10.1061/(ASCE)MT.1943-5533.0001030 ↗
29. Natural pozzolan-and granulated blast furnace slag-based binary geopolymers10.3989/mc.2016.03615 ↗
30. Strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2012.11.015 ↗
31. A comparative study on the durability of geopolymers produced with ground glass fiber, fly ash, and glass-powder in sodium sulfate solution10.1016/j.conbuildmat.2017.07.139 ↗
32. R.T. Hemmings, Process for Converting Waste Glass Fiber into Value Added Products, Final Report (No. DOE GO13015-1). Albacem LLC, 2005.10.2172/889402 ↗
33. Waste E-glass particles used in cementitious mixtures10.1016/j.cemconres.2005.12.010 ↗
34. P.R. Rangaraju, H. Rashidian-Dezfouli, G. Nameni, G.Q. Amekuedi, Properties and performance of ground glass fiber as a pozzolan, in: Portland cement concrete 2016 International Concrete Sustainability Conference, 2016.
35. Role of ground glass fiber as a pozzolan in Portland cement concrete10.3141/2629-06 ↗
36. Synthesis and mechanical properties of metakaolinite-based geopolymer10.1016/0927-7757(95)03490-0 ↗
37. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
38. The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer10.1016/j.matlet.2010.12.049 ↗
39. Effect of curing temperature on geopolymerization of metakaolin-based geopolymers10.1016/j.clay.2014.06.024 ↗
40. Alkaline activation of fly ashes: NMR study of the reaction products10.1111/j.1551-2916.2004.01141.x ↗
41. Parametric Study on the Properties of Geopolymer Mortar Incorporating Bottom Ash
42. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
43. Mechanical and microstructural properties of alkali-activated fly ash geopolymers10.1016/j.jhazmat.2010.04.064 ↗
44. Workability and strength of coarse high calcium fly ash geopolymer10.1016/j.cemconcomp.2006.11.002 ↗
45. Impact of sodium sulfate solution on mechanical properties and structure of fly ash based geopolymers10.1617/s11527-014-0325-4 ↗
46. Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack10.1016/j.cemconcomp.2012.01.010 ↗
47. High strength geopolymers produced from coal combustion fly ash
48. Chemistry of geopolymeric systems, terminology
49. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
50. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
51. The composition range of aluminosilicate geopolymers10.1016/j.jeurceramsoc.2004.06.001 ↗
52. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
53. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements10.1016/S0008-8846(01)00724-4 ↗
54. The effect of composition and temperature on the properties of fly ash-and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
55. Fixation of heavy metals in geopolymeric materials based on brown coal fly ash
56. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
57. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
58. Effect of cement kiln dust on Geopolymer composition and its resistance to sulphate attack
59. Effect of calcium additions on N-A–S–H cementitious gels10.1111/j.1551-2916.2010.03668.x ↗
60. Struble · 2013 · 2013
61. H. Chen, X. Wu, J. Hu, Adaptive K-means clustering algorithm, in: International Symposium on Multispectral Image Processing and Pattern Recognition, International Society for Optics and Photonics, 2007, pp. 67882A-67882A10.1117/12.750002 ↗
62. C. Darken, J. Moody, Fast adaptive k-means clustering: some empirical results, in Neural Networks, 1990, 1990 IJCNN International Joint Conference on, IEEE, 1990, pp. 233–23810.1109/IJCNN.1990.137720 ↗
63. Geopolymerisation of multiple minerals10.1016/S0892-6875(02)00255-8 ↗
64. Synthesis and characterization of lithium zeolites with ABW type from coal fly ash10.1002/ep.11689 ↗
65. Quantitative determination of phases in the alkali activation of fly ash Part I. Potential ash reactivity10.1016/j.fuel.2005.08.014 ↗
66. A review on alkaline activation: new analytical perspectives10.3989/mc.2014.00314 ↗
67. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
68. Development of geopolymer concrete with different curing conditions IPTEK