Reducing greenhouse gas emissions for prescribed concrete compressive strength
Source abstract
Abstract
Abstract Often, when proportioning “green” concrete mixtures, the use of Supplementary Cementitious Materials (SCMs) is deemed to be favorable. While appearing more in the literature, it is still not commonplace that design strength is considered in assessments of environmental impacts. When mechanical or material properties are incorporated into environmental impact assessments, comparisons are drawn based on the property attainable for any given mixture, most commonly, compressive strength. However, in structural applications, compressive strength is typically specified in the design and there are currently no means for specifying the best concrete constituents for a set compressive strength to reduce greenhouse gas emissions from production. In this research, concrete mixture proportioning based on water-to-binder content and supplementary material-to-Ordinary Portland Cement ratios are examined. For these parameters, mathematical models are developed to perform optimization of GHG emissions for four groups of concrete (those containing varying levels of fly ash, ground granulated blast furnace slag, natural pozzolans, and limestone filler as a means to reduce Ordinary Portland Cement content). For the particular binary blended binders examined in this work, optimal ratios of supplementary material use were highly dependent on the type of alternative material and were consistently below the highest replacement level considered. The equations developed will facilitate the green engineering of concrete when a specified strength is required.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. van Oss · 2015 · 16.1
2. IEA · 2009
3. T.D. Kelly, G.R. Matos, Historical statistics for mineral and material commodities in the United States (2016 version), 2016. https://minerals.usgs.gov/minerals/pus/historical-statistics/ [accessed 2017 August 10].
4. van Oss · 2017
5. Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%10.1088/1748-9326/11/7/074029 ↗
6. Cement production technology improvement compared to factor 4 objectives10.1016/j.cemconres.2009.09.031 ↗
7. WBCSD, IEA, Cement technology roadmap 2009, 2009.
8. S.A. Miller, V.M. John, S.A. Pacca, A. Horvath, Carbon dioxide reduction potential in the global cement industry by 2050. Cem. Concr. Res., (in press).
9. Mehta · 2006
10. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
11. Assessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba10.1016/j.jclepro.2016.02.125 ↗
12. Life-cycle inventory analysis of concrete production: a critical review10.1016/j.cemconcomp.2014.03.005 ↗
13. Identifying improvement potentials in cement production with life cycle assessment10.1021/es100771k ↗
14. Sustainable cement production—present and future10.1016/j.cemconres.2011.03.019 ↗
15. A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies10.1016/j.jclepro.2008.04.007 ↗
16. Green house gas emissions due to concrete manufacture10.1065/lca2007.05.327 ↗
17. Impact of Singapore’s importers on life-cycle assessment of concrete10.1016/j.jclepro.2016.01.051 ↗
18. Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended portland cements containing fly ash and limestone powder10.1016/j.cemconcomp.2014.11.003 ↗
19. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
20. Hybrid life cycle assessment of greenhouse gas emissions from cement, concrete and geopolymer concrete in Australia10.1016/j.jclepro.2017.03.122 ↗
21. LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete10.1016/j.resconrec.2010.04.001 ↗
22. Influence of fly ash allocations of the life cycle assessment of cement-based materials10.1016/j.jclepro.2017.04.093 ↗
23. A plant based LCA of high-strength prestressed concrete elements and the assessment of a practical ecological variant10.1016/j.cemconcomp.2016.07.011 ↗
24. Material nature versus structural nurture: the embodied carbon of fundamental structural elements10.1021/es202190r ↗
25. Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: literature review and theoretical calculations10.1016/j.cemconcomp.2012.01.004 ↗
26. Probabilistic design and management of environmentally sustainable repair and rehabilitation of reinforced concrete structures10.1016/j.cemconcomp.2013.10.009 ↗
27. Greenhouse gas emissions from concrete can be reduced by using mix proportions, geometric aspects, and age as design factors10.1088/1748-9326/10/11/114017 ↗
28. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
29. A life-cycle approach to environmental, mechanical, and durability properties of “green” concrete mixes with rice husk ash10.1016/j.jclepro.2015.06.029 ↗
30. Study of two concrete mix-design strategies to reach carbon mitigation objectives10.1016/j.cemconcomp.2009.04.001 ↗
31. Comparison indices for design and proportioning of concrete mixtures taking environmental impacts into account10.1016/j.cemconcomp.2016.02.002 ↗
32. Impact of the selection of functional unit on the life cycle assessment of green concrete10.1007/s11367-017-1284-0 ↗
33. Durability performance and engineering properties of shale and volcanic ashes concretes10.1016/j.conbuildmat.2015.01.020 ↗
34. Potential use of binary and composite limestone cements in concrete production10.1016/j.conbuildmat.2013.12.012 ↗
35. An experimental study on optimum usage of GGBS for the compressive strength of concrete10.1016/j.cemconcomp.2007.01.001 ↗
36. An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete10.1016/j.cemconres.2004.09.031 ↗
37. Effect of specimen sizes, specimen shapes, and placement directions on compressive strength of concrete10.1016/j.nucengdes.2005.08.004 ↗
38. A.P. Gursel, A. Horvath, GreenConcrete LCA Webtool. 2012. http://greenconcrete.berkeley.edu/concretewebtool.html (accessed 2014 November 13).
39. Supplementary cementitious materials to mitigate greenhouse gas emissions from concrete: can there be too much of a good thing?10.1016/j.jclepro.2018.01.008 ↗
40. Concrete mixture proportioning for desired strength and reduced global warming potential10.1016/j.conbuildmat.2016.10.081 ↗
41. Generalization of strength versus water-cementitious ratio relationship to age10.1016/j.cemconres.2006.05.013 ↗
42. Hooton · 2007
43. ERMCO, Ready-mixed Concrete Industry Statistics Year 2013, European Ready Mixed Concrete Organization, Editor, Brussels, Belgium, 2014.
44. GNR, Global Cement Database on CO2 and Energy Information, 2014. http://www.wbcsdcement.org/GNR-2013/index.html (accessed 2015 June 15).
45. CARB, California Greenhouse Gas Emission Inventory: 2000-2012, 2014. http://arb.ca.gov/cc/inventory/pubs/reports/ghg_inventory_00-12_report.pdf (accessed 2015 September 18).
46. A mathematical model for predicting the carbon sequestration potential of ordinary portland cement (OPC) concrete10.1016/j.conbuildmat.2017.04.133 ↗