journal article·2018-04

Fracture studies on synthetic fiber reinforced cellular concrete using acoustic emission technique

M. Abdur Rasheed, S. Suriya Prakash, Gangadharan Raju, Yuma Kawasaki

Publisher page

Abstract

Abstract Cellular lightweight concrete (CLC) is increasingly used for low strength non-structural and structural applications. The effects of synthetic fiber reinforcement on the fracture behavior of CLC is investigated. In particular, acoustic emission (AE) technique is employed to study the influence of macro (structural), micro polyolefin synthetic fibers and their combinations on the fracture behavior of CLC beams. Notched fiber reinforced CLC beams were tested to study the crack initiation and propagation characteristics using AE sensors. Different AE parameters are correlated with the crack growth and damage accumulation. An attempt has been made to correlate the crack mouth opening displacement (CMOD) with the number of AE hits. The variation of cumulative acoustic energy release of the cracks is studied with respect to applied load and CMOD. Three dimensional source location of cracks is carried out based on the AE events picked by the sensors bonded to the CLC specimens. The analysis of AE results indicates that the crack source location identification from AE is consistent with the actual crack development. Analysis of AE signals reveal that the CLC matrix cracking produces signals with less number of hits that lie in the notched plane in bending. Moreover, the signals from the post peak regime correspond to more number of hits which tend to be scattered around the plane of notch due to the fiber pull out.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Rock Mechanics and Modeling · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Use of Furnace Bottom Ash for producing lightweight aggregate concrete with thermal insulation properties10.1016/j.jclepro.2015.03.007 ↗
2. Cement & Concrete Composites A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
3. M. R. Jones and A. Mccarthy, “Preliminary views on the potential of foamed concrete as a structural material,” no. 1, pp. 21–31, 2005.10.1680/macr.57.1.21.57866 ↗
4. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
5. Engineering material properties of a fiber reinforced cellular concrete
6. M.A. Rasheed and S.S. Prakash, “Effect of Synthetic Fiber Reinforcement on Compression and Tension Behavior of Cellular Lightweight Concrete,” in: 9th RILEM International Symposium on Fiber Reinforced Concrete- BEFIB 2016, Vancouver, Canada, no. 9, pp. 632–641.
7. Experimental study on compression behavior of fiber reinforced cellular concrete stack bonded masonry prisms
8. Mechanical behavior of sustainable hybrid-synthetic fiber reinforced cellular light weight concrete for structural applications of masonry10.1016/j.conbuildmat.2015.08.137 ↗
9. Monitoring of concrete cylinders with and without steel fibers under compression using piezo-ceramic smart aggregates
10. Behavior of hybrid-synthetic fiber reinforced cellular lightweight concrete under uni-axial tension - experimental and analytical studies10.1016/j.conbuildmat.2017.12.095 ↗
11. M.A. Rasheed and S.S. Prakash, “Flexural Behavior of Synthetic Fiber Reinfored Cellular Light Weight Concrete,” in: 2nd R.N.Raikar International Conference and Banthia-Basheer International Symposium on Advances in Science and Technology of Concrete, Mumbai, India, 2015, pp. 1–7.
12. M.A. Rasheed and S.S. Prakash, “Compression behavior of synthetic fiber reinforced cellular concrete masonry prisms,” in: 2nd R.N.Raikar International Conference and Banthia-Basheer International Symposium on Advances in Science and Technology of Concrete, Mumbai, India, 2015, no. 2, pp. 1–5.
13. A study on residual compression behavior of structural fiber reinforced concrete exposed to moderate temperature using digital image correlation10.1007/s40069-016-0127-x ↗
14. Fracture energy of foamed concrete based on three-point bending test on notched beams10.1016/j.proeng.2015.06.157 ↗
15. Fracture mechanics parameters of autoclaved aerated concrete10.1016/S0008-8846(99)00059-9 ↗
16. Fracture process zone in notched concrete beam under three-point bending by acoustic emission10.1016/j.conbuildmat.2014.05.012 ↗
17. Quantitative damage estimation of concrete by acoustic emission10.1016/S0950-0618(00)00071-4 ↗
18. “Identification of signals in the context of acoustic emission in concrete10.1007/BF00730957 ↗
19. Finite element modelling of cracks as acoustic emission sources
20. Recovery of microcrack parameters in mortar using quantitative acoustic emission10.1007/BF00568107 ↗
21. Acoustic emission behavior of steel fibre reinforced concrete under bending10.1016/j.conbuildmat.2009.06.042 ↗
22. Acoustic emission signal for fatigue crack classification on reinforced concrete beam10.1016/j.conbuildmat.2013.08.057 ↗
23. Evaluation of concrete fracture procedure based on acoustic emission parameters10.1016/j.conbuildmat.2013.06.034 ↗
24. Kinematics of corrosion damage monitored by acoustic emission techniques and based on a phenomenological model kinematics of corrosion damage monitored by acoustic emission techniques and based on a phenomenological model10.3151/jact.10.160 ↗
25. Evaluation for RC specimen damaged from rebar corrosion by acoustic emission technique10.1016/j.conbuildmat.2014.05.074 ↗
26. Monitoring fracture of steel corroded reinforced concrete members under flexure by acoustic emission technique10.1016/j.conbuildmat.2016.11.079 ↗
27. Damage assessment of corrosion in prestressed concrete by acoustic emission10.1016/j.conbuildmat.2012.11.071 ↗
28. Mechanisms of crack propagation due to corrosion of reinforcement in concrete by AE-SiGMA and BEM10.1016/j.conbuildmat.2003.10.007 ↗
29. The use of acoustic emission intensity analysis for the assessment of cover crack growth in corroded concrete structures10.1007/s10921-016-0369-1 ↗
30. Corrosion mechanisms in reinforced concrete by acoustic emission10.1016/j.conbuildmat.2013.02.020 ↗
31. Investigation of different fracture modes in cement-based materials by acoustic emission10.1016/j.cemconres.2013.02.002 ↗
32. Crack classification in reinforced concrete beams with varying thicknesses by mean of acoustic emission signal features10.1016/j.conbuildmat.2013.03.090 ↗
33. Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation10.1016/j.conbuildmat.2013.06.005 ↗
34. Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission10.1016/j.conbuildmat.2012.07.106 ↗
35. Experimental structural analysis of hybrid composite-concrete beams by digital image correlation (DIC) and acoustic emission (AE)
36. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
37. IS 2185-4, “Concrete masonry units, Part 4: Preformed foam cellular concrete blocks,” New Delhi, India., 2008.
38. “RILEM FMC-50:Determination of the fracture energy of mortar and concrete by means of three - point bend tests on notched beams,” Mater. Struct., vol. 18, no. 4, 1985, pp. 287–290.10.1007/BF02472918 ↗
39. “BS EN 14651:2005. Test method for metallic fibred concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual),” 2005.
40. “JAPAN CONCRETE INSTITUTE: Method of test for fracture energy of concrete by use of notched beam (JCI-S-001-2003).”
41. S. Joshi, N. Thammisetty, S.S. Prakash, S. Jain, Cracking and Ductility Analysis of Steel Fiber Reinforced Prestressed Beams in Flexure using DIC“ ACI Structural journal (Accepted), 2018.10.14359/51706827 ↗