Effect of elevated temperatures on compressive strength and microstructure of cement paste containing palm oil clinker powder
Source abstract
Abstract
Abstract Residual compressive strength of cement after exposure to elevated temperatures is important when introduces a new supplementary cementitious material for cement based applications. Palm oil clinker (POC) is a residue produced upon burning of palm oil shells and fibres in a boiler of palm oil mill. The aim of this work is to evaluate the high temperature effect on compressive strength and microstructure change of palm oil clinker powder (POCP) containing cement paste. The palm oil clinker powder containing cement (POCPC) was prepared for 30% replacement of ordinary Portland cement (OPC). Elevated temperatures at 300 °C, 600 °C, and 800 °C have been maintained for 3 h for both OPC and POCPC paste. The compressive strengths of OPC and POCPC were measured at the curing age of 7, 28, 56 and 90 days. The mineralogy, IR spectroscopy, thermal analysis and microstructure were investigated using XRD, FTIR, TGA and FESEM, respectively. The compressive strength of POCPC is significantly higher than that of OPC sample when thermally activated at 600 °C and 800 °C for 3 h. The XRD, FTIR, TGA and FESEM results reveal that more hydration products (C-S-H) sustain in POCPC compare with OPC after exposure to elevated temperature that is the causes behind higher compressive strength in POCPC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Review of Indonesian standard for concrete building subjected to fire10.1016/j.proeng.2013.03.061 ↗
2. Studies on the behavior of reinforced concrete short column subjected to fire10.1016/j.aej.2015.12.022 ↗
3. Mechanical behaviour of ultra-high strength concrete at elevated temperatures and fire resistance of ultra-high strength concrete filled steel tubes10.1016/j.matdes.2016.05.050 ↗
4. Microstructure of composite cements containing blast-furnace slag and silica nano-particles subjected to elevated thermally treatment temperature10.1016/j.conbuildmat.2015.05.042 ↗
5. Fire resistance and mechanical properties of carbon nanotubes–clay bricks wastes (Homra) composites cement10.1016/j.conbuildmat.2015.08.074 ↗
6. Engineering and sustainability aspect of palm oil shell powder in cement10.1063/1.4984667 ↗
7. Research review of cement clinker chemistry10.1016/j.cemconres.2015.05.018 ↗
8. Highly reactive dicalcium silicates for belite cements
9. Thermal activation effect on palm oil clinker properties and their influence on strength development in cement mortar10.1016/j.conbuildmat.2016.08.092 ↗
10. Characterization of palm oil clinker powder for utilization in cement-based applications10.1016/j.conbuildmat.2016.12.158 ↗
11. Assessment of pozzolanic activity of palm oil clinker powder10.1016/j.conbuildmat.2016.10.002 ↗
12. Microstructural examination of the effect of elevated temperature on the concrete containing clinoptilolite10.1016/j.conbuildmat.2014.09.023 ↗
13. Effect of elevated temperature on physico-mechanical properties of blended cement concrete10.1016/j.conbuildmat.2010.06.078 ↗
14. Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures10.1016/j.conbuildmat.2012.08.042 ↗
15. The effects of elevated temperature on cement paste containing GGBFS10.1016/j.cemconcomp.2007.12.003 ↗
16. Fire resistance of sewage sludge ash blended cement pastes
17. Effects of recycled glass on properties of architectural mortar before and after exposure to elevated temperatures10.1016/j.jclepro.2015.04.004 ↗
18. Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature10.1016/j.conbuildmat.2012.09.069 ↗
19. Combined effect of silica fume and expanded vermiculite on properties of lightweight mortars at ambient and elevated temperatures10.1016/j.conbuildmat.2015.04.021 ↗
20. Ready mixed concrete behavior of granulated blast furnace slag contained cement
21. Effects of elevated temperature and water quenching on strength and microstructure of mortars with river sand substitutes10.1016/j.conbuildmat.2016.03.189 ↗
22. Influence of graphene nanosheets on rheology, microstructure, strength development and self-sensing properties of cement based composites10.3390/su10030822 ↗
23. An investigation on blast-furnace stag as fine aggregate in alkali-activated slag mortars subjected to elevated temperatures10.1016/j.jclepro.2015.07.127 ↗
24. Thermal stability and decomposition mechanisms of ettringite at 120 °C10.1016/S0008-8846(01)00558-0 ↗
25. Effect of elevated temperature on the physico-mechanical and microstructural properties of blended cement pastes
26. Effect of temperature on the physico-mechanical and mineralogical properties of Homra pozzolanic cement pastes10.1016/S0008-8846(00)00403-8 ↗
27. Effect of temperature on the structure and strength properties of cement pastes containing fly ash alone or in combination with limestone
28. Active belite β-C2S and the hydration of calcium sulfoaluminates prepared from nano-materials
29. Characteristics of cement pastes containing sulphoaluminate and belite prepared from nano-materials10.1016/j.conbuildmat.2012.07.098 ↗
30. Effect of treatment temperature on the early hydration characteristics of superplasticized silica fume blended cement pastes10.1016/j.cemconres.2004.06.012 ↗
31. Behavior of composite cement pastes containing silica nano-particles at elevated temperature10.1016/j.conbuildmat.2014.07.078 ↗
32. Physico-chemical and mechanical characteristics of pozzolanic cement pastes and mortars hydrated at different curing temperatures10.1016/j.conbuildmat.2011.06.026 ↗
33. High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement–lime masonry mortar10.1016/j.jclepro.2018.03.291 ↗
34. Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials10.1016/j.conbuildmat.2017.12.106 ↗
35. Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature10.1016/j.conbuildmat.2015.10.104 ↗
36. Mix design for self-compacting palm oil clinker concrete based on particle packing10.1016/j.matdes.2013.10.086 ↗
37. Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete10.1016/j.conbuildmat.2016.02.172 ↗
38. Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete10.1016/j.jclepro.2015.08.043 ↗
39. Effect of palm oil clinker incorporation on properties of pervious concrete10.1016/j.conbuildmat.2016.03.181 ↗
40. Heavy metals leaching behaviour assessment of palm oil clinker10.17576/jsm-2018-4703-12 ↗
41. Effect of coating palm oil clinker aggregate on the engineering properties of normal grade concrete10.3390/coatings7100175 ↗
42. Improved pozzolanic activity of sugar cane bagasse ash by selective grinding and classification10.1016/j.cemconres.2016.08.020 ↗
43. Changes in the structure of hardened cement paste due to high temperature10.1007/BF02479085 ↗
44. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
45. Assessment of sugar cane straw ash (SCSA) as pozzolanic material in blended Portland cement: microstructural characterization of pastes and mechanical strength of mortars10.1016/j.conbuildmat.2015.07.108 ↗
46. Influence of sodium oxide on properties of fresh and hardened paste of alkali-activated blast-furnace slag