The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM)
Source abstract
Abstract
In this study, nano-silica (NS) has been incorporated into self-consolidating engineered cementitious composites (SC-ECC) for improving materials utilization and performance. Accordingly, the experimental results of the influence of nano-silica (NS) and polyvinyl alcohol (PVA) fibre on the high temperature resistance and microstructure of NS-modified SC-ECC is reported. Standard ECC mix (ECC M45) was adopted to develop mix matrix of composites with PVA fibre at 0.5%, 1%, 1.5%, and 2%, while NS at 1%, 2%, 3%, and 4% with the aim of investigating the behaviour of the materials at high temperatures. The NS-modified SC-ECC specimens were considered at various high temperatures up to 400 °C for residual compressive strength assessment using response surface methodology (RSM). While the microstructure of the mix containing 2% each of NS and PVA fibre at a high temperature up to 400 °C were investigated for microstructural properties through mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). The incorporation of NS and PVA fibre improved the performance of ECC due to the physiochemical effects and microcracks’ bridging ability of NS and PVA fibres, respectively, which was further confirmed by the microstructural studies. The developed prediction model using RSM shows a strong degree of correlation and predictability between the dependent (residual compressive strength) variable and the independent (NS, and PVA) variables after high temperatures exposure. The multi-objective optimization results revealed that the criteria settings at 2% each of NS and PVA fibre achieved a residual compressive strength of about 101 MPa while optimizing the high temperature resistance up to about 293 °C.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Effect of elevated temperature on strain-hardening engineered cementitious composites10.1016/j.conbuildmat.2014.07.052 ↗
2. Environmentally induced deterioration of concrete: physical motivation and numerical modeling10.1016/S0013-7944(02)00156-X ↗
3. Rigby · 2010
4. The effect of elevated temperature on concrete materials-a literature review
5. Naus · 2006
6. V.C. Li, Engineered cementitious composites-tailored composites through micromechanical modeling, 1998.
7. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
8. Recent progress on HPFRCC in Japan10.3151/jact.4.19 ↗
9. On engineered cementitious composites (ECC)10.3151/jact.1.215 ↗
10. Large-scale processing of engineered cementitious composites
11. Performance of bridge deck link slabs designed with ductile engineered cementitious composite
12. V.C. Li et al., Durable link slabs for jointless bridge decks based on strain-hardening cementitious composites, 2003.
13. High-early-strength engineered cementitious composites for fast, durable concrete repair-material properties
14. Repair and retrofit with engineered cementitious composites10.1016/S0013-7944(99)00117-4 ↗
15. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
16. High-volume fly ash concrete: analysis and application10.1061/(ASCE)1084-0680(2006)11:1(58) ↗
17. Microstructure, crack propagation, and mechanical properties of cement pastes containing high volumes of fly ashes10.1016/0008-8846(95)00109-P ↗
18. Superplasticized fly ash concrete for structural applications
19. N. Bouzoubaa, M. Zhang, V. Malhotra, D. Golden, Mechanical properties and durability of laboratory produced high-volume fly ash blended cements, Special Publication, vol. 199, pp. 55–82, 2001.
20. Performance of high-volume fly ash concrete in marine environment10.1016/j.cemconres.2017.09.008 ↗
21. Effect of class F fly ash on the durability properties of concrete10.1016/j.serj.2017.09.001 ↗
22. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
23. Mindess · 2003
24. Properties of nano-silica-modified self-compacting engineered cementitious composites10.1016/j.jclepro.2017.06.137 ↗
25. Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica10.1016/j.conbuildmat.2017.10.098 ↗
26. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
27. Modification effects of colloidal nanoSiO2 on cement hydration and its gel property10.1016/j.compositesb.2012.05.056 ↗
28. A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes10.1016/j.matdes.2014.04.025 ↗
29. Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag10.1016/j.cemconcomp.2012.02.005 ↗
30. Properties of high-volume fly ash concrete incorporating nano-SiO210.1016/j.cemconres.2003.11.013 ↗
31. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
32. Characteristics of cement mortar with nano-SiO2 particles10.1016/j.conbuildmat.2005.12.020 ↗
33. Properties of nano silica modified rubbercrete10.1016/j.jclepro.2016.02.007 ↗
34. Assessing mechanical properties and microstructure of fire-damaged engineered cementitious composites
35. X. Yigang, Y. Wong, C. Poon, M. Anson, Residual properties of PFA concrete subjected to high temperatures, in: Proceedings of the International Symposium on High Performance Concrete, 2000, pp. 10–15.
36. Fibre mortar composites under fire conditions: effects of ageing and moisture content of specimens10.1007/BF02473214 ↗
37. Behaviour of engineered cementitious composites and hybrid engineered cementitious composites at high temperatures10.1016/j.conbuildmat.2017.10.077 ↗
38. ASTM C618-17, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2017, www.astm.org.
39. ASTM C150/C150M-17, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2017, www.astm.org.
40. S. EFNARC, Guidelines for self-compacting concrete, EFNARC, UK (www.efnarc.org), pp. 1–32, 2002.
41. Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures10.1061/(ASCE)MT.1943-5533.0000335 ↗
42. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
43. Aligizaki · 2014
44. B. EN, 12390-3. Testing hardened concrete, Compressive strength of test specimens, vol. 19, 2009.
45. Thermal and mechanical properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures10.1016/j.conbuildmat.2017.09.125 ↗
46. Thermal stability of PVA fiber strain hardening cement-based composites10.1016/j.conbuildmat.2015.07.039 ↗
47. Assessing mechanical properties and microstructure of fire-damaged engineered cementitious composites
48. Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800 C10.1016/S0008-8846(99)00240-9 ↗
49. Changes of pore structure of cement mortars due to temperature10.1016/0008-8846(80)90072-1 ↗
50. Residual compressive properties of strain-hardening cementitious composite with different curing ages exposed to high temperature10.1016/j.conbuildmat.2015.08.041 ↗
51. Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement10.1016/j.cemconres.2004.11.013 ↗
52. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
53. Fire behavior of high-performance concrete made with silica fume at various moisture contents
54. Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with Multiple Fine Cracks (HPFRCC). Sub-Committee, Recommendations for Design and Construction of HPFRCC, Concrete Committee, Japan Society of Civil Engineers, 2008.
55. Engineered cementitious composites with high-volume fly ash
56. Formulating and optimising the compressive strength of controlled low-strength materials containing mine tailings by mixture design and response surface methods10.1016/j.mineng.2013.07.007 ↗
57. Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method10.1016/j.matdes.2013.06.034 ↗
58. Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method10.1016/j.compositesb.2014.01.017 ↗
59. Multi-response optimization of post-fire residual compressive strength of high performance concrete10.1016/j.conbuildmat.2012.08.048 ↗
60. Design and Analysis of Experiments
61. Effect of fly ash and grading agent on the properties of mortar using response surface methodology10.1016/j.jobe.2016.12.004 ↗
62. Properties of nano-silica modified pervious concrete
63. Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method10.1016/j.jclepro.2016.12.156 ↗