journal article·2019-03

The effect of synthetic and natural fire-retardants on burning and chemical characteristics of thermally modified teak (Tectona grandis L. f.) wood

Milan Gaff, František Kačík, Miroslav Gašparík, Luigi Todaro, Dennis Jones, Roberto Corleto, Linda Makovická Osvaldová, Hana Čekovská

Publisher page

Abstract

Abstract This article deals with the effect of various temperatures of thermal modification and fire retardants on selected burning characteristics and chemical wood components of teak (Tectona grandis L. f.) wood. The thermal modification was carried out at temperatures 160 °C, 180 °C and 210 °C. Subsequently, thermally modified wood was treated by natural (arabinogalactan) and synthetic (ammonium phosphate) fire retardants. The effect of thermal modification as well as fire retardant was detected by burning characteristics such as weight loss, burning rate, maximum burning rate, ratio of the maximum burning rate and time to reach maximum burning rate. The chemical changes caused by the influence of these factors were determined by changing the content of cellulose, hemicelluloses, holocellulose, lignin and extractives. The relationship between burning characteristics and chemical changes in the thermally modified wood was analyzed using Spearman’s correlation. The results showed that the thermal modification of teak wood had a negative effect on its ignition and burning properties. Synthetic fire retardant had the highest retardation effect in all cases. The natural fire retardant caused a better retardation effect on thermally modified wood at temperature 180 and 210 °C. The relative content of lignin, extractives and cellulose increased, while the amount of holocellulose and particularly hemicelluloses decreased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Lignin and Wood Chemistry · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Wood colour variation in sapwood and heartwood of young trees of Tectona grandis and its relationship with plantation characteristics, site, and decay resistance10.1051/forest/2009088 ↗
2. Wood properties of teak (Tectona grandis) from a mature unmanaged stand in East Timor10.1007/s10086-010-1164-8 ↗
3. Wood durability of home-garden teak against brown-rot and white-rot fungi10.1007/s00468-005-0429-0 ↗
4. Chemical extractive compounds determining the brown-rot decay resistance of teak wood10.1007/s00107-006-0127-7 ↗
5. Evaluation of antitermitic activity of different extracts obtained from Indonesian teakwood (Tectona grandis L.f)10.15376/biores.7.2.1452-1461 ↗
6. Color stability of weathered heat-treated teak wood
7. Machinability of minor wooden species before and after modification with thermo-vacuum technology10.3390/ma10020121 ↗
8. Effect of heat treatment on decay resistance of Pinus Roxburghii wood against decaying fungi
9. Structural characterization of steam-heat treated Tectona grandis wood analyzed by FT-IR and 2D-IR correlation spectroscopy10.1016/j.cclet.2014.11.024 ↗
10. Effects of heat-treated wood particles on the physico-mechanical properties and extended creep behavior of wood/recycled-HDPE composites using the time-temperature superposition principle10.3390/ma10040365 ↗
11. Thermal degradation kinetics of sugarcane bagasse and soft wood cellulose10.3390/ma10111246 ↗
12. Effect of combined steam and heat treatments on extractives and lignin in sapwood and heartwood of Turkey oak (Quercus cerris L.) wood10.15376/biores.8.2.1718-1730 ↗
13. Influence of thermo-vacuum treatment on thermal degradation of various wood species10.1007/s00107-017-1230-7 ↗
14. Heartwood extractives and natural durability of plantation-grown teakwood (Tectona grandis L.) – a case study10.1007/s00107-003-0428-z ↗
15. Hillis · 2014
16. EN 350 · 1994
17. Tectona grandis Linn. and its fire characteristics affected by the thermal modification of wood10.15376/biores.12.2.2805-2817 ↗
18. Fire resistance of Douglas fir (Pseudotsuga menzieesi) treated with borates and10.1016/j.biortech.2006.04.023 ↗
19. Chemical modification of wood: a short review10.1080/17480270600670923 ↗
20. Larch arabinogalactan
21. Structure of arabinogalactan from Larix laricina and its reactivity with antibodies directed against type-II-arabinogalactans10.1016/j.carbpol.2011.07.006 ↗
22. Tolerability of a proprietary larch arabinogalactan extract: a randomized, double-blind, placebo-controlled clinical trial in healthy subjects
23. Whistler · 1993
24. Fengel · 2003
25. Oral administration of arabinogalactan affects immune status and fecal microbial populations in dogs10.1093/jn/132.3.478 ↗
26. Does larch arabinogalactan enhance immune function? A review of mechanistic and clinical trials10.1186/s12986-016-0086-x ↗
27. Structure of an arabinogalactan from the wood o the Siberian larch (Larix sibirica Ledeb.)
28. Structural and molecular properties of the arabinogalactan isolated from Mongolian larchwood (Larix dahurica L.)10.1016/0008-6215(94)84145-4 ↗
29. Polysaccharides from larch biomass
30. ISO 13061-2 · 2014
31. ISO 13061-1 · 2014
32. ASTM D1107-96 · 2013
33. ASTM D1106-96 · 2013
34. Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses
35. Uber ein neues Verfahren zur Schnellbestimmung der Rein-Cellulose
36. Potential of teak heartwood extracts as a natural wood preservative10.1016/j.jclepro.2016.11.074 ↗
37. Chemical characteristics of teak wood attacked by Neotermes tectonae10.15376/biores.10.2.2094-2102 ↗
38. Characterisation of thermally modified wood: Molecular reasons for wood performance improvement10.1007/s001070050287 ↗
39. “Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR10.1016/j.carbpol.2004.08.008 ↗
40. Wood modification by heat treatment: a review10.15376/biores.4.1.Esteves ↗
41. Mechanical and chemical behavior of spruce wood modified by heat10.1016/j.buildenv.2005.07.017 ↗