journal article·2019-03

Mitigation of ASR expansion in concrete using ultra-fine coal bottom ash

Soheil Oruji, Nicholas A. Brake, Ramesh K. Guduru, Likhith Nalluri, Özge Günaydın-Şen, Krishna Kharel, Saeed Rabbanifar, Seyedsaeid Hosseini, Emily Ingram

Publisher page

Abstract

Abstract The focus of this study is to both quantitatively and qualitatively assess the effectiveness of pulverized ultra-fine bottom ash as a cement replacement to mitigate the detrimental effects of alkali-silica reaction (ASR). Raw landfilled coal bottom ash was pulverized using a vibratory ball-mill at two different fineness levels. The pulverized bottom ash was used as a cement replacement in a mortar mix at various replacement rates (9, 23, 33 and 41%). The expansion of the pulverized bottom ash blended mortars were found to be 10% higher than the fly ash control specimens after normalization of the chemical composition. FTIR spectroscopy also revealed more polymerization in the pulverized bottom ash mixes than the FA mixes; but much lower than the control Portland cement mix. Overall, it is observed that the pulverized bottom ash can serve as an ASR mitigating cementitious material but is slightly less effective than class F fly ash most likely due to lower reactivity, and less solubility of alumina and silica.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Coal and Its By-products

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. U.S. Geological Survey, “Mineral commodity summaries 2015,” U.S. Geological Survey, Reston, Virginia, 2015.
2. Choate · 2003
3. American Coal Ash Association (ACAA), “2015 Coal Combustion Product (CCP) Production & Use Survey Report,” 2015. [Online]. Available: https://www.acaa-usa.org/Portals/9/Files/PDFs/2015ReportFinal.pdf.
4. Benson · 2011
5. Effect of coal bottom ash as partial replacement of sand on workability and strength properties of concrete10.1016/j.jclepro.2015.08.001 ↗
6. Properties of concrete prepared with crushed fine stone, furnace bottom ash and fine recycled aggregate as fine aggregates10.1016/j.conbuildmat.2009.02.009 ↗
7. Novel cementitious materials produced from incinerator bottom ash10.1016/j.resconrec.2007.06.003 ↗
8. Use of Furnace Bottom Ash for producing lightweight aggregate concrete with thermal insulation properties10.1016/j.jclepro.2015.03.007 ↗
9. Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete10.1016/j.conbuildmat.2010.06.065 ↗
10. Internal curing of high performance mortars with bottom ash10.1016/j.cemconcomp.2016.04.009 ↗
11. Evaluation of concrete incorporating bottom ash as a natural aggregates replacement10.1016/j.wasman.2006.07.020 ↗
12. Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement10.1016/j.conbuildmat.2016.04.080 ↗
13. Effect of incinerator bottom ash properties on mechanical and pore size of blended cement mortars10.1016/j.matdes.2011.05.003 ↗
14. Production of lightweight concrete using incinerator bottom ash10.1016/j.conbuildmat.2006.11.013 ↗
15. Influences of chemical activators on incinerator bottom ash10.1016/j.wasman.2008.06.026 ↗
16. Compressive strength and durability properties of high volume fly ash (HVFA) concretes containing ultrafine fly ash (UFFA)10.1016/j.conbuildmat.2015.02.068 ↗
17. Strength activity and microstructure of a blended ultra-fine coal bottom ash cement paste and mortar10.1016/j.conbuildmat.2017.07.088 ↗
18. A review of alkali-silica reaction and expansion mechanisms 2. Reactive aggregates10.1016/0008-8846(76)90083-1 ↗
19. Swamy · 2002
20. Correlation of reaction products and expansion potential in alkali-silica reaction for blended cement materials
21. Imaging of ASR gel by Soft X-ray microscopy10.1016/S0008-8846(97)00274-3 ↗
22. Cofired biomass fly ashes in mortar: reduction of Alkali Silica Reaction (ASR) expansion, pore solution chemistry and the effects on compressive strength10.1016/j.conbuildmat.2015.02.021 ↗
23. Reliability of chemical index model in determining fly ash effectiveness against alkali-silica reaction induced by highly reactive glass aggregates10.1016/j.conbuildmat.2014.04.042 ↗
24. Decoupling the effects of chemical composition and fineness of fly ash in mitigating alkali-silica reaction10.1016/j.cemconcomp.2013.06.009 ↗
25. Aspects of the pore solution chemistry of blended cements related to the control of alkali silica reaction10.1016/0008-8846(87)90046-9 ↗
26. The effectiveness of supplementary cementing materials in suppressing expansion due to ASR: another look at the reaction mechanisms part 2: pore solution chemistry10.1016/0008-8846(94)90047-7 ↗
27. How does fly ash mitigate alkali–silica reaction (ASR) in accelerated mortar bar test (ASTM C1567)?10.1016/j.cemconcomp.2012.11.004 ↗
28. Efficiency of fly ash in mitigating alkali-silica reaction based on chemical composition
29. Malvar · 2005
30. Influence of particle size distribution on the effectiveness of type-f fly ash in suppressing expansion due to alkali-silica reactivity
31. “Properties of Concrete Containing Ultra-Fine Fly Ash,”
32. The effect of grinding process on mechanical properties and alkali–silica reaction resistance of fly ash incorporated cement mortars10.1016/j.powtec.2009.08.020 ↗
33. Detwiler · 2003
34. “Mitigation of Alkali-Silica Reactivity in New Mexico,”10.3141/1698-02 ↗
35. Evaluation of ASR resistance of fly ash-slag combinations using the modified ASTM C 1260 test method
36. “Alkali-silica reaction in portland cement concrete: testing methods and mitigation alternatives,”
37. The effect of fly ash composition on the expansion of concrete due to alkali–silica reaction10.1016/S0008-8846(00)00283-0 ↗
38. Effect of fly ash on the expansion of concrete due to alkali-silica reaction – exposure site studies10.1016/j.cemconcomp.2010.11.006 ↗
39. Alkali reactivity of mortars containing chert and incorporating moderate-calcium fly ash10.1016/j.cemconres.2004.02.007 ↗
40. Comparative analysis of fly ash effect with three different method in mortars that are exposed to alkali silica reaction10.1016/j.compositesb.2014.01.004 ↗
41. Alkali–aggregate reaction in activated fly ash systems10.1016/j.cemconres.2006.11.002 ↗
42. ASTM C778-13 · 2013
43. ASTM C109M-16a · 2016
44. ASTM C1260-14 · 2014
45. Folliard · “Preventing ASR/DEF in New Concrete: Final Report” · 2006
46. “The role of alkali content of Portland cement on the expansion of concrete prisms containing reactive aggregates and supplementary cementing materials,”10.1016/j.cemconres.2009.08.009 ↗
47. “Test methods for evaluating preventive measures for controlling expansion due to alkali–silica reaction in concrete,”10.1016/j.cemconres.2006.01.014 ↗
48. ASTM C150M-16 · 2016
49. ASTM C618-15 · 2006
50. ASTM C128-15 · 2015
51. ASTM C204-16 · 2016
52. ASTM C494-16 · 2016
53. ASTM C1437-15 · 2015
54. ASTM C305-14 · 2014
55. Fly Ash fineness on temperature rise, setting and strength development of mortar10.1061/(ASCE)MT.1943-5533.0000411 ↗
56. Evaluation of concrete structures affected by alkali-silica reaction and delayed ettringite formation
57. Alkali-silica reaction: current understanding of the reaction mechanisms and the knowledge gaps10.1016/j.cemconres.2015.05.024 ↗
58. Aggregation and gel formation in basic Silico – Calco – Alkaline solutions studied: a SAXS, SANS, and ELS study10.1021/jp990151s ↗
59. The role of Ca(OH)2 in the breakdown of Portland cement concrete due to alkali-silica reaction10.1016/0008-8846(79)90024-3 ↗
60. “The role of calcium in alkali-silica reaction,”
61. “Effect of additives on decomposition of sodium carbonate: precombustion CO2 capture sorbent regeneration,”10.1021/ef101486m ↗
62. Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash binders10.1016/j.cemconres.2003.08.003 ↗
63. “Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar,”10.1016/j.matdes.2011.07.008 ↗
64. Assessment of binary and ternary blends of metakaolin and Class C fly ash for alkali-silica reaction mitigation in concrete10.1016/j.cemconres.2010.08.006 ↗
65. Effect of fly ash on Portland cement systems: part I. Low-calcium fly ash10.1016/S0008-8846(99)00153-2 ↗
66. Extraction of alumina from coal fly ash by mixed-alkaline hydrothermal method10.1016/j.hydromet.2014.05.012 ↗
67. Ion-specific effects influencing the disclussion of tricalcium silicate10.1016/j.cemconres.2014.02.006 ↗
68. Incorporation of Al in CASH gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis10.1016/j.conbuildmat.2017.08.091 ↗
69. A Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate10.1016/S0008-8846(99)00243-4 ↗
70. Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques10.1016/j.cemconres.2009.01.017 ↗
71. Characterization of ASR in concrete by Si 29 MAS NMR spectroscopy10.1061/(ASCE)MT.1943-5533.0001354 ↗
72. Effect of Na 2 O concentration on the lifetime of Er 3+-doped sodium silicate glass10.1039/c3ra40532j ↗
73. Structure of calcium silicate hydrate (C-S-H): Near-, mid-, and far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
74. Structural evolution of sol–gel SiO2 heated glasses containing silver particles10.1016/j.jpcs.2003.09.031 ↗
75. IR and Raman spectroscopic studies of sol-gel derived alkaline-earth silicate glasses
76. Solid state 27Al NMR and FTIR study of lanthanum aluminosilicate glasses10.1016/S0022-3093(99)00555-4 ↗
77. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
78. Alkali activation of reactive silicas in cements: in situ29Si MAS NMR studies of the kinetics of silicate polymerization10.1007/BF00360736 ↗
79. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗