journal article·2019-06

Flexural behaviour of corroded reinforced concrete beams repaired with ultra-high toughness cementitious composite

Lijun Hou, Jin Wang, Ting Huang, Chun Shen, Farhad Aslani, Da Chen

Publisher page

Abstract

Abstract The repair of corroded reinforced concrete (RC) structures is necessary to improve their serviceability. Ultra-high toughness cementitious composite (UHTCC), characterised by excellent tensile behaviour, crack control capacity, and durability, shows great potential for the repair and strengthening of corroded members, especially in harsh marine environments. This paper presents an experimental study and a theoretical analysis of the flexural performance of corroded RC beams repaired with UHTCC. The experimental results indicated that macro cracks in concrete were transformed into multiple fine cracks and a slight nonlinear strain distribution was observed along the sectional depth. The replacement of damaged concrete with UHTCC can recover the initial load-carrying capacity at corrosion ratios within 11.2%. After yielding of beams, the development of UHTCC-concrete interface crack in the pure bending region was beneficial to ductility improvement. A theoretical model considering the effect of pitting corrosion was proposed for calculating flexural capacity of repaired beams.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Flexural strength of concrete beams with corroding reinforcement
2. The effect of corrosion on shear behavior of reinforced self-consolidating concrete beams10.1016/j.engstruct.2014.07.044 ↗
3. Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns10.1016/j.engstruct.2014.06.043 ↗
4. Residual flexure capacity of corroded reinforced concrete beams10.1016/j.engstruct.2006.07.018 ↗
5. Effect of corrosion on bond behavior and bending strength of reinforced concrete beams10.1631/jzus.2001.0298 ↗
6. Shear and flexural strength prediction of corroded R.C. beams10.1016/j.conbuildmat.2017.05.125 ↗
7. Residual strength of corrosion-damaged reinforced concrete beams
8. Effect of degree of corrosion on the properties of reinforcing steel bars10.1016/S0950-0618(01)00009-5 ↗
9. Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete
10. Stress-strain relationship of corroded steel bars
11. Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members
12. Bond behaviour of corroded reinforcing steel bars in concrete10.1016/j.cemconres.2006.05.008 ↗
13. Seismic retrofitting of corroded reinforced concrete columns using carbon composites
14. Nordin · 2005
15. Experimental research on seismic behavior of reinforced concrete columns strengthened with TRC under corrosion environment10.1061/(ASCE)ST.1943-541X.0001713 ↗
16. Tensile strain-hardening behavior of PVA-ECC
17. Direct tensile properties of engineered cementitious composites: a review10.1016/j.conbuildmat.2017.12.124 ↗
18. Improved mechanical performance: shear behaviour of strain-hardening cement-based composites (SHCC)10.1016/j.cemconres.2007.04.009 ↗
19. Impact of reinforcement ratio and loading type on the deformation capacity of high-Performance fiber-reinforced cementitious composites reinforced with mild steel10.1061/(ASCE)ST.1943-541X.0001562 ↗
20. Tensile and flexural properties of ultra high toughness cementitious composite10.1007/s11595-009-4677-5 ↗
21. Shear behaviors of reinforced ultrahigh toughness cementitious composite slender beams with stirrups10.1061/(ASCE)MT.1943-5533.0000833 ↗
22. Compressive fatigue damage and failure mechanism of fiber reinforced cementitious material with high ductility10.1016/j.cemconres.2016.09.019 ↗
23. Behavior of hybrid-fiber engineered cementitious composites subjected to dynamic tensile loading and projectile impact10.1061/(ASCE)0899-1561(2005)17:2(143) ↗
24. Highly damage-tolerant beam-column joints through use of high-performance fiber-reinforced cement composites
25. A comparison of engineered cementitious composites versus normal concrete in beam-column joints under reversed cyclic loading10.1617/s11527-012-9890-6 ↗
26. A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC)10.1016/j.cemconcomp.2006.12.014 ↗
27. Influence of microcrack self-healing behavior on the permeability of Engineered Cementitious Composites10.1016/j.cemconcomp.2017.04.004 ↗
28. Experimental study on two-way simply supported concrete slab with post-poured UHTCC under concentrated load
29. Flexural strengthening of RC beams with CFRP grid-reinforced ECC matrix10.1016/j.compstruct.2018.01.048 ↗
30. Strengthening of reinforced concrete columns by High-Performance Fiber-Reinforced Cementitious Composite (HPFRC) sprayed mortar with strengthening bars10.1016/j.compstruct.2018.05.045 ↗
31. Innovative ECC jacketing for retrofitting shear-deficient RC members10.1016/j.conbuildmat.2016.02.077 ↗
32. Development of pseudo-ductile permanent formwork for durable concrete structures10.1617/s11527-009-9561-4 ↗
33. Development of reinforced ultra-high toughness cementitious composite permanent formwork: experimental study and digital image correlation analysis10.1016/j.compstruct.2017.08.016 ↗
34. Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites10.1016/j.conbuildmat.2018.05.132 ↗
35. In-plane strengthening of unreinforced concrete masonry wallettes using ECC shotcrete10.1016/j.engstruct.2014.01.043 ↗
36. Mechanical performance of corroded RC member repaired by HPFRCC patching10.1016/j.conbuildmat.2012.05.013 ↗
37. Corrosion protection performance of high performance fiber reinforced cement composites as a repair material10.1016/j.cemconcomp.2010.03.005 ↗
38. 2009
39. Experimental evaluation of FRP jackets in upgrading RC corroded columns with substandard detailing10.1016/j.engstruct.2004.02.003 ↗
40. Effect of damaged concrete cover on the behavior of corroded concrete beams repaired with CFRP sheets10.1016/j.compstruct.2011.01.011 ↗
41. Flexural and shear behaviors of reinforced ultrahigh toughness cementitious composite beams without web reinforcement under concentrated load10.1016/j.engstruct.2012.01.011 ↗
42. Cheng · 2012
43. Bond-slip behavior of corroded rebar embedded in ultra-high toughness cementitious composite10.1061/(ASCE)MT.1943-5533.0002324 ↗
44. Effect of corrosion on bond behaviors of rebar embedded in ultra-high toughness cementitious composite10.1016/j.conbuildmat.2017.02.008 ↗
45. Experimental study and theoretical models on compressive properties of ultra high toughness cementitious composites10.1061/(ASCE)MT.1943-5533.0000109 ↗
46. CEB-FIP, Fib Model code for Concrete Structures 2010, International Federation for Structural Concrete (fib), Lausanne, Switzerland, 2013.
47. Reliability of deteriorating RC slab bridges10.1061/(ASCE)0733-9445(1997)123:12(1638) ↗
48. Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement10.1016/0008-8846(95)00006-2 ↗