journal article·2019-08

Determination of low-temperature crack control parameter of binding asphalt materials based on gray correlation analysis

Chuanfeng Zheng, Ruiming Li, Mingjun Hu, Linlin Zou

Publisher page

Abstract

Abstract Convenient evaluation indexes for the low-temperature cracking of matrix asphalt, asphalt mastic, and asphalt-fine aggregate combination under different low-temperature conditions are determined. On the basis of bending failure test, the stress–strain curves of the three asphalt materials under different low-temperature conditions are ascertained to obtain the critical value of the bending strain energy density, which can effectively characterize the low-temperature crack resistance. On the basis of gray relational analysis, the correlation between the critical value of the bending strain energy density of the above-mentioned materials and their ultimate bending failure strength and strain under low-temperature conditions is determined, and the reasonable strength or strain index of different materials at dissimilar temperatures is acquired. Experimental results show that the three asphalt materials exhibit different low-temperature performance changes due to dissimilar material ratios. The changes of asphalt mastic and matrix asphalt are similar, whereas the change of the asphalt-fine aggregate combination differs from those of the two. Gray correlation analysis results show that, for the matrix asphalt and asphalt mastic, the critical fitting effect of ultimate bending failure strength with the bending strain energy density is better at 0 °C to −10 °C. Thus, the ultimate bending failure strength can be reasonably used as the low-temperature cracking control index. Under the condition of −10 °C to −30 °C, the ultimate bending failure strain can be considered the evaluation index of low-temperature cracking. For the asphalt-fine aggregate combination, the deformation capacity can be suitably used as the evaluation method of low-temperature cracking in the entire low-temperature range of 0 °C to −30 °C. These results simplify the evaluation method of low-temperature cracking performance of asphalt materials, which is important for improving the low-temperature performance of these materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Study of the porous asphalt performance with cellulosic fibres10.1016/j.conbuildmat.2016.12.222 ↗
2. Fatigue performance evaluation of modified asphalt binder using of dissipated energy approach10.1016/j.conbuildmat.2017.01.010 ↗
3. Viscosity criteria and methodology for estimating the optimum compaction temperatures of polymer modified asphalt binders in hot mix asphalt design10.1016/j.conbuildmat.2016.10.093 ↗
4. Influence of mineral filler on the low-temperature cohesive strength of asphalt mortar10.1016/j.coldregions.2016.10.006 ↗
5. Implementing fractional viscoelastic model to evaluate low temperature characteristics of crumb rubber and gilsonite modified asphalt binders10.1016/j.conbuildmat.2013.09.001 ↗
6. Viscoelastic-based approach to evaluate low temperature performance of asphalt binders10.1016/j.conbuildmat.2016.10.073 ↗
7. Influence of volumetric property on mechanical properties of vertical vibration compacted asphalt mixture10.1016/j.conbuildmat.2016.12.159 ↗
8. Influence of low-temperature physical hardening on stiffness and tensile strength of asphalt concrete and stone mastic asphalt10.1016/j.conbuildmat.2014.03.011 ↗
9. Rheological and low temperature properties of asphalt composites containing rock asphalts10.1016/j.conbuildmat.2015.07.150 ↗
10. Analysis of different indices for high- and low-temperature properties of asphalt binder10.1016/j.conbuildmat.2015.02.008 ↗
11. Low temperature property and salt releasing characteristics of antifreeze asphalt concrete under static and dynamic conditions10.1016/j.coldregions.2015.02.009 ↗
12. Effect of cement kiln dust on the low-temperature durability and fatigue life of hot mix asphalt10.1016/j.coldregions.2014.11.010 ↗
13. Investigation of asphalt binder and asphalt mixture low temperature creep properties using semi mechanical and analogical models10.1016/j.conbuildmat.2013.12.022 ↗
14. Asphalt concrete resistance against fracture at low temperatures under different modes of loading10.1016/j.coldregions.2014.11.001 ↗
15. Characterizing air void effect on fracture of asphalt concrete at low-temperature using discrete element method10.1016/j.engfracmech.2016.11.030 ↗
16. Low-temperature mechanics of hot recycled mixtures through Asphalt Thermal Cracking Analyzer (ATCA)10.1016/j.conbuildmat.2015.03.047 ↗
17. Estimation of low-temperature performance of recycled asphalt mixtures through relaxation modulus analysis10.1016/j.coldregions.2016.10.013 ↗
18. Stress-strain model of cement asphalt mortar subjected to temperature and loading rate10.1016/j.conbuildmat.2016.02.080 ↗
19. Effects of aggregate gradations and binder contents on engineering properties of cement emulsified asphalt mixtures10.1016/j.conbuildmat.2016.12.095 ↗
20. Evaluation of the temperature effect on Rolling Thin Film Oven aging for polymer modified asphalt10.1016/j.conbuildmat.2017.01.135 ↗
21. Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder10.1016/j.conbuildmat.2016.03.152 ↗
22. Fracture failure in crack interaction of asphalt binder by using a phase field approach10.1617/s11527-014-0372-x ↗
23. Low temperature cracking of modified asphalt mixtures as related to binder characteristics10.1201/9781315643274-45 ↗