journal article·2019-08

Experimental investigation of the interface bond properties between SHCC and concrete under sulfate attack

Shuling Gao, Jiapeng Jin, Guanhua Hu, Lin Qi

Publisher page

Abstract

Abstract A new class of high-performance fiber reinforced cementitious composite, namely Strain-Hardening Cementitious Composites (SHCC), is characterized by strain-hardening, multiple-cracking and tight crack width. This paper investigates the coupled action of sulfate and wet-dry cycles on the degradation degree of interfacial bonding performance of SHCC/concrete, through slant shear and splitting tensile test coupled with Na2SO4 wet-dry cycles. The degradation mechanism is investigated with SEM and XRD. The results show that the erosion resistance of SHCC/concrete interface is better than concrete/concrete for a range of cycles from 0 to 120. The strength of SHCC/concrete decreased more slowly than concrete/concrete, and the corrosion resistance coefficient can still reach above 60% even after 120 cycles (no matter in Type A or Type B test). By contrast, the reinforced concrete B and existing concrete A are separated from one another, when the cycles are more than 90 in Type B test. SHCC and existing concrete A was found to form a more compact structure by micromechanical analysis, which reduced calcium vanadium and enhanced the sulfate resistance of structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Mechanical and durability evaluation of concrete with sulfate solution corrosion
2. Damage on lining concrete in highway tunnels under combined sulfate and chloride attack
3. Diffusion-reaction model for the internal sulfate attack in concrete10.1016/j.conbuildmat.2015.10.177 ↗
4. Han · 2012
5. Resistance of concrete and mortar against combined attack of chloride and sodium sulphate10.1016/j.cemconcomp.2014.06.013 ↗
6. Durability of concrete under sulfate attack exposed to freeze–thaw cycles10.1016/j.coldregions.2014.12.006 ↗
7. Pozzolan concrete durability on sulphate attack10.1016/j.proeng.2015.08.035 ↗
8. Resistance of concrete against combined attack of chloride and sulfate under drying–wetting cycles10.1016/j.conbuildmat.2015.12.151 ↗
9. Skalny · 2001
10. De-icing salt scaling resistance of mechanically loaded engineered cementitious composites10.1016/j.cemconres.2007.04.001 ↗
11. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
12. Autogenous healing of engineered cementitious composites under wet–dry cycles10.1016/j.cemconres.2009.01.013 ↗
13. On engineered cementitious composites (ECC): a review of the material and its applications
14. Mechanical behavior of a polyvinyl alcohol fiber reinforced engineered cementitious composite (ECC) using local ingredients10.1016/j.conbuildmat.2017.02.158 ↗
15. Durability study on engineered cementitious composites (ECC) under sulfate and chloride environment10.1016/j.conbuildmat.2016.12.074 ↗
16. Steady state and multiple cracking of short random fiber composites
17. Progress and application of engineered cementitious composites
18. Effect of fiber volume fraction on the off-crack-plane fracture energy in strain -hardening engineered cementitious composites10.1111/j.1151-2916.1995.tb07979.x ↗
19. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (ECC)10.1016/j.conbuildmat.2014.12.071 ↗
20. Dual effectiveness of freezing–thawing and sulfate attack on high-volume slag-incorporated ECC10.1016/j.compositesb.2012.07.038 ↗
21. Resistance of polyvinyl alcohol fiber reinforced cementitious composites to sulfate attack under long-tern immersion
22. Localised strain and stress in bonded concrete overlays subjected to differential shrinkage10.1617/s11527-006-9130-z ↗
23. Cracking and healing of engineered cementitious composites under chloride environment
24. Near-to-surface properties affecting bond strength in concrete repair10.1016/j.cemconcomp.2013.11.005 ↗
25. Innovative ECC jacketing for retrofitting shear-deficient RC members10.1016/j.conbuildmat.2016.02.077 ↗
26. Matrix design for waterp roof engineered cementitious composites (ECCs)10.1016/j.conbuildmat.2017.02.076 ↗
27. Behaviour of composite high performance concrete slab on steel I-beams subjected to static hogging moment10.1016/j.engstruct.2017.02.030 ↗
28. Experimental study of engineering cementitious composites
29. Wang · 2010
30. Durability of strain-hardening cement-based composites (SHCC)10.1617/s11527-012-9845-y ↗
31. Behaviour of bonded SHCC overlay systems
32. Study on the bonding properties of engineered cementitious composites (ECC) and existing concrete exposed to high temperature10.1016/j.conbuildmat.2018.11.136 ↗
33. Slant shear bond strength between self-compacting concrete and old concrete10.1016/j.conbuildmat.2016.11.023 ↗
34. Standard for Test Method of Mechanical Properties of Ordinary Concrete, Beijing, China Building Industry Press, 2003.
35. Comparative testing of crack formation in strain-hardening cement-based composites (SHCC)10.1617/s11527-015-0567-9 ↗
36. GB/T 50082-2009 · 2009 · 11
37. A novel link of the time scale in accelerated chloride-induced corrosion test in reinforced SHCC10.1016/j.conbuildmat.2018.02.019 ↗
38. A study of some factors affecting bond in cementitious fiber reinforced repairs10.1016/j.cemconres.2014.05.008 ↗
39. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate10.1016/S0958-9465(02)00083-5 ↗
40. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
41. Gong · 2009