Evaluating physical-mechanical properties and long periods environmental risk of fired clay bricks incorporated with electroplating sludge
Source abstract
Abstract
Abstract Electroplating sludge (ES) is regularly listed as the hazardous waste in all the world, and its treatment is always a pressing problem for environment safety. This study introduced this sludge into the production of fired clay bricks in lab scale, not only consumed a large amount of this sludge but also provided an available raw material for building materials industries. Two types clay, brown clay and red clay, were mixed with ES and used in the production of bricks. Physical property tests showed that the introduction of ES with mass fraction of 10 wt% impacted slightly mass loss, linear shrinkage and bulk density. However, water absorption increased by 15% and compressive strength declined more than 30%. Porosity analysis showed that the introduction of ES enhanced porosity and enlarged pore volume and size. These negative impacts bought by the incorporation of ES can be remedied by elevating firing temperature. Long periods leaching tests for 10 days proved that the releasing concentrations of all heavy metals (Cu, Zn, Cr and Ni) from fired samples containing 10 wt% of ES were under 1 mg/L, far below the corresponding regulation limitation values. This study indicated that ES could be sustainably used in the manufacturing process of fired bricks or ceramics, and the influences on physical-mechanical properties bought by the introduction of ES could be remedied by elevating firing temperature or others ways.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Nuclear materials and radiation effects · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Electroplating sludge metal recovering with vitrification using mineral powder additive10.1016/j.resconrec.2011.10.006 ↗
2. Influence of carbonation on the acid neutralization capacity of cements and cement-solidified/stabilized electroplating sludge10.1016/j.chemosphere.2008.10.044 ↗
3. Ferrite process of electroplating sludge and enrichment of copper by hydrothermal reaction10.1016/j.seppur.2008.01.003 ↗
4. Use of electroplating sludge in production of fired clay bricks: Characterization and environmental risk evaluation10.1016/j.conbuildmat.2017.10.130 ↗
5. Utilization of water treatment plant sludge in structural ceramics bricks10.1016/j.clay.2015.09.012 ↗
6. Technical feasibility of reusing coal combustion by-products from a thermoelectric power plant in the manufacture of fired clay bricks10.1016/j.clay.2014.11.030 ↗
7. Effects of using arsenic-iron sludge wastes in brick making10.1016/j.wasman.2013.09.022 ↗
8. Application of water treatment sludge in the manufacturing of lightweight aggregate10.1016/j.conbuildmat.2013.02.016 ↗
9. The use of different forms of waste in the manufacture of ceramic bricks10.1016/j.clay.2011.03.003 ↗
10. Recycling PC and TV waste glass in clay bricks and roof tiles10.1016/j.wasman.2008.12.003 ↗
11. GB 30760-2014, Technical specification for coprocessing of solid waste in cement kiln, China EPA.
12. The role of temperature on Cr (VI) formation and reduction during heating of chromium-containing sludge in the presence of CaO10.1016/j.chemosphere.2015.05.097 ↗
13. Incineration of tannery sludge under oxic and anoxic conditions: Study of chromium speciation10.1016/j.jhazmat.2014.09.066 ↗
14. Chromium hebavior during cement-product process: A clinkerization, hydration, and leaching study10.1016/j.jhazmat.2011.04.077 ↗
15. Thermal behaviors and heavy metal vaporation of phosphatized tannery sludge in incineration process10.1016/S1001-0742(08)62162-2 ↗
16. Ageing of chromium (III)-bearing slag and its relation to the atmospheric oxidation of solid chromium (III)-oxide in the presence of calcium oxide10.1016/S0045-6535(03)00453-3 ↗
17. Crystallization behavior and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics synthesized from granite wastes10.1016/j.jnoncrysol.2016.11.030 ↗
18. Effects of SiO2, Al2O3 and Fe2O3 on leachability of Zn, Cu and Cr in ceramics incorporated with electroplating sludge10.1016/j.jece.2017.06.019 ↗
19. Sludge valorization from wastewater treatment plant to its application on the ceramic industry10.1016/j.jenvman.2011.06.016 ↗
20. An investigation on use of paper mill sludge in brick manufacturing10.1016/j.conbuildmat.2017.05.087 ↗
21. Environmental and technical aspects of the utilization of tannery sludge as a raw material for clay products10.1016/S0955-2219(02)00024-9 ↗
22. Leaching and geochemical behavior of fired bricks containing coal wastes10.1016/j.jenvman.2017.12.060 ↗
23. Recycling feasibility of glass wastes and calamine processing tailings in fired bricks making10.1007/s12649-016-9657-3 ↗
24. GB/T 3810.3-2016, Test method of ceramic tiles-Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density.
25. China standard, HJ/T 300-2007, Solid waste-Extraction procedure for leaching toxicity-Acetic acid buffer solution method.
26. China standard, HJ/T 299-2007, Solid waste-Extraction procedure for leaching toxicity-Sulpuric acid & nitric acid method.
27. Removal of trivalent chromium in the complex state of trivalent chromium passivation wastewater10.1016/j.cej.2013.09.084 ↗
28. Addition of waste glass for improving the immobilization f heavy metals during the use of electroplating sludge in the production of clay bricks10.1016/j.conbuildmat.2017.12.177 ↗
29. The improvement in properties and environmental safety of fired clay bricks containing hazardous waste electroplating sludge: The role of Na2SiO310.1016/j.jclepro.2019.04.274 ↗
30. Valorization and inertization of galvanic sludge waste in clay bricks10.1016/j.clay.2014.12.022 ↗
31. Synthesis and thermal behaviour of geopolymer-type material from waste ceramic10.1016/j.conbuildmat.2013.08.063 ↗
32. Sustainable use of tannery sludge in brick manufacturing in Bangladesh10.1016/j.wasman.2016.12.041 ↗
33. Variation in physical and mechanical properties of fired-clay bricks incorporating ETP biosolids10.1016/j.jclepro.2016.01.094 ↗
34. Utilization of textile effluent wastewater treatment plant sludge as brick material10.1007/s10163-013-0139-4 ↗
35. Reusability of sewage sludge in clay bricks10.1007/s10163-003-0105-7 ↗
36. Effects of recycled glass substitution on the physical and mechanical properties of clay bricks10.1016/j.wasman.2009.05.015 ↗
37. Utilization of waste glass to enhance physical- mechanical properties of fired clay brick10.1016/j.jclepro.2015.10.084 ↗
38. GB 5085.3-2007, Identification standards for hazardous waste-Identification for extraction toxicity.
39. Alumina polymorphs affect the metals immobilization effect when beneficially using copper-bearing industrial sludge for ceramics10.1016/j.chemosphere.2014.08.065 ↗
40. Copper aluminate spinel in the stabilization and detoxification of simulated copper-laden sludge10.1016/j.chemosphere.2010.04.048 ↗
41. Beneficial metal stabilization mechanism using simulated sludge incineration ash for ceramic products10.1002/jctb.4150 ↗