Mechanical and thermal properties of aluminate cement paste with blast furnace slag at high temperatures
Source abstract
Abstract
Abstract The effect of blast furnace slag (BFS) on the mechanical and thermal properties of calcium aluminate cement (CAC) subjected to high temperature was evaluated in this study. The hydrate phase, micromorphology, and porous structure characteristics were determined by differential thermal analysis/thermogravimetry, X-ray diffraction (XRD), scanning electron microscopy, and nitrogen adsorption–desorption. The thermal conductivity of the pastes was evaluated using a thermal conductivity analyzer. The results indicated that with an increase in BFS, the thermal conductivity of CAC–BFS blend samples increases initially and decreases subsequently, and the compressive strength of the CAC–BFS blend samples exhibits the same trend. The addition of 30–40% BFS positively influenced the pore size distribution of cement paste and improved the thermal conductivity (λ) of the CAC-based composites subjected to high temperature, enhancing the mechanical properties of the CAC-based composites. Thermal conductivity also decreases at increased temperatures and correlates with pore structure. The experimental results indicate that the amount of BFS added considerably affects thermal conductivity and compressive strength, and that the optimal amount of BFS can be determined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Identification and evaluation of well integrity and causes of failure of well integrity barriers (A review)10.1016/j.jngse.2017.05.009 ↗
2. New steam resilient cement: evaluation of long-term properties under extreme conditions
3. K.M. Suyan, D. Dasgupta, S.P. Garg, V.K. Jain, Novel cement composition for completion of thermal recovery (ISC) wellbores, in: SPE/IADC INDIAN Drill. Technol. Conf. Exhib. 2006 - Drill. India Challenges Oppor. 2006, 2006, pp. 73–78. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846946506&partnerID=tZOtx3y1.
4. Self-restraint thermal stress in early-age concrete samples and its evaluation10.1016/j.conbuildmat.2016.12.066 ↗
5. F. Mac, O. Diego, N. Hollman, P.R. Energy, U. Javier, G. Alberto, Long-Term Calcium Phosphate Cement for In-Situ Combustion Project Synchronized Thermal Additional Recovery (STAR) Project, SPE Heavy Oil Conf., 2014, pp. 1–10.10.2118/170016-MS ↗
6. Z. Li, X. Cheng, M. Zhang, X. Wu, S. Wu, D. Wu, Y. Xiao, The research and application about aluminate cement slurry in heavy oil thermal well, in: SPE Therm. Well Integr. Des. Symp., 2016. https://doi.org/10.2118/182514-MS.10.2118/182514-MS ↗
7. Solidification/stabilization of toxic metals in calcium aluminate cement matrices10.1016/j.jhazmat.2013.04.048 ↗
8. A. Garnier, J. Saint-Marc, A.-P. Bois, Y. Kermanac’h, An innovative methodology for designing cement-sheath integrity exposed to steam stimulation, in: SPE Drill. Complet. vol. 3, 2010, pp. 58–69. https://doi.org/10.2118/117709-PA.10.2118/117709-PA ↗
9. Experimental study on the thermal expansion property and mechanical performance of oil well cement with carbonaceous admixtures10.1039/C7RA03504G ↗
10. Chemical activation of calcium aluminate cement composites cured at elevated temperature10.1016/j.cemconcomp.2012.08.002 ↗
11. Effect of sodium silicate on calcium aluminate cement hydration in highly alkaline media: a microstructural characterization
12. Thermal properties of hydrating calcium aluminate cement pastes10.1016/j.cemconres.2009.09.005 ↗
13. Electrical conductivity and phase composition of calcium aluminate cement containing air-cooled and water-cooled slag at 20, 40 and 60 °C10.1016/j.cemconres.2004.09.027 ↗
14. High-performance concretes from calcium aluminate cements10.1016/S0008-8846(99)00103-9 ↗
15. Compressive strength development of calcium aluminate cement-GGBFS blends10.1016/j.cemconcomp.2012.08.016 ↗
16. Investigation of the hydration of Portland blastfurnace slag cement: composition, structure and properties of the hydrated material10.1680/adcr.1989.2.5.15 ↗
17. A fractal approach to determine thermal conductivity in cement pastes10.1016/j.conbuildmat.2014.10.016 ↗
18. A.G. Salehpour, E. Pershikova, A. Chougnet-Sirapian, S. Taoutaou, D.A. Adiningtyas, Novel steam-resilient cement system for long-term steam injection well integrity: case study of a steamflooded field in Indonesia, in: SPE Heavy Oil Conf., 2014, pp. 1–9. https://doi.org/10.2118/170048-MS.10.2118/170048-MS ↗
19. Thermal properties of cement-based materials: multiscale estimations at early-age10.1016/j.cemconcomp.2018.01.003 ↗
20. Numerical tests of thermal cracking induced by temperature gradient in cement-based composites under thermal loads10.1016/j.cemconcomp.2006.09.002 ↗
21. Effective thermal conductivity of Mexican geothermal cementing systems in the temperature range from 28°C to 200°C10.1016/S1359-4311(01)00048-5 ↗
22. Microstructural investigation of calcium aluminate cement-based ultra-high performance concrete (UHPC) exposed to high temperatures10.1016/j.cemconres.2017.09.004 ↗
23. Cement of high specific heat and high thermal conductivity, obtained by using silane and silica fume as admixtures10.1016/S0008-8846(00)00296-9 ↗
24. An experimental study on thermal conductivity of concrete10.1016/S0008-8846(02)00965-1 ↗
25. Investigation about the effect of different fine aggregates on physical, mechanical and thermal properties of mortars10.1016/j.conbuildmat.2016.08.008 ↗
26. J. Militký, R. Mishra, H. Jamshaid, 20 - Basalt fibers, in: A.R.B.T.-H. of P. of T. and T.F. (Second E. Bunsell (Ed.), Text. Inst. B. Ser., Woodhead Publishing, 2018, pp. 805–840. https://doi.org/10.1016/B978-0-08-101272-7.00020-1.10.1016/B978-0-08-101272-7.00020-1 ↗
27. The effect of elevated temperature on the properties of cement mortars containing nanosilica and heavyweight aggregates10.1016/j.conbuildmat.2017.02.003 ↗
28. API, Recommended Practice for Testing Well Cements: API RECOMMENDED PRACTICE 10B-2, (2013) 111.
29. ASTM D7984-16, Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument, West Conshohocken, PA, 2016.
30. Microstructure of composite cements containing blast-furnace slag and silica nano-particles subjected to elevated thermally treatment temperature10.1016/j.conbuildmat.2015.05.042 ↗
31. Changes in color and thermal properties of fly ash cement mortar after heat treatment10.1016/j.conbuildmat.2018.01.029 ↗
32. Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites10.1016/j.tsep.2018.07.014 ↗
33. Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures10.1016/j.buildenv.2006.06.010 ↗
34. Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites10.1016/j.conbuildmat.2016.09.118 ↗
35. Study of the early hydration of calcium aluminates in the presence of different metallic salts10.1016/j.cemconres.2015.11.013 ↗
36. Behavior of calcium aluminate cement (CAC) in the presence of hexavalent chromium10.1016/j.cemconcomp.2016.07.006 ↗
37. Kinetic modeling of calcium aluminate cement hydration10.1016/j.ces.2010.08.012 ↗
38. Study of cement-based thermal storage materials with fly ash10.1016/j.tca.2015.06.010 ↗
39. X-AFm stabilization as a mechanism of bypassing conversion phenomena in calcium aluminate cements10.1016/j.cemconres.2015.02.022 ↗
40. Improvement of the thermal properties of Sorel cements by polyvinyl acetate: consequences on physical and mechanical properties10.1016/j.enbuild.2018.03.007 ↗
41. Influence of red mud on fresh and hardened properties of self-compacting concrete10.1016/j.conbuildmat.2018.05.171 ↗
42. The effect of temperature on the formation of the hydrated calcium aluminate cement structure10.1016/j.proeng.2013.04.015 ↗
43. Behavior of calcium aluminate cement (CAC) in the presence of hexavalent chromium10.1016/j.cemconcomp.2016.07.006 ↗