journal article·2019-12

Deterioration of mode II fracture toughness, compressive strength and elastic modulus of concrete under the environment of acid rain and cyclic wetting-drying

Changlin Zhou, Zheming Zhu, Aijun Zhu, Lei Zhou, Yong Fan, Lin Lang

Publisher page

Abstract

Abstract There are some concrete structures subjected to both impacts of acid rain and cyclic wetting-drying, such as the concrete bridge pier and dam in an acid rain zone, and therefore, it is of great significance to study the deterioration of concrete material parameters under such combining impacts. The parameters investigated in this paper mainly include the corrosion depth, mode II fracture toughness, compressive strength and elastic modulus. Additionally, the chemical composition and thermal stability of corroded products distributed in severe, mild and free corrosion zones were measured by using X-ray diffraction (XRD) and thermogravimetric analysis (TGA). To study the pure mode II fracture toughness of deteriorated concrete, anti-symmetrical four-point bending (ASFPB) tests were conducted on the corroded concrete specimens. The test results indicate that the dissolving corrosion caused by H+ occurs in the corrosion zone of concrete, while the swelling corrosion caused by SO42- mainly occurs in the severe corrosion zone. The thermal stability of corroded products distributed in the severe, mild and free corrosion zone of concrete decreases gradually. The pure mode II fracture toughness of concrete almost decreases linearly with increasing the number of cyclic wetting-drying, and increase with increasing the pH value of simulated acid rain. Moreover, there is a good linear relationship between pure mode II fracture toughness and compressive strength of concrete under both impacts of simulated acid rain and cyclic wetting-drying. The elastic modulus of corrosion concrete decreases with the increase of wetting-drying cycles, and it decreases with decreasing the pH value of simulated acid rain solutions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. The effect of C3A content on sulfate durability of Portland limestone cement mortars10.1016/j.conbuildmat.2012.04.091 ↗
2. Keller · 2012
3. The effects of nano-calcined kaolinite clay on cement mortar exposed to acid deposits10.1016/j.conbuildmat.2015.11.016 ↗
4. Deterioration rate of hardened cement caused by high concentrated mixed acid attack10.1016/j.conbuildmat.2013.11.008 ↗
5. Sulfuric acid resistance of blended ash geopolymer concrete10.1016/j.conbuildmat.2013.01.018 ↗
6. Pore structure in concrete exposed to acid deposit10.1016/j.conbuildmat.2013.08.075 ↗
7. Performance of sewer pipe concrete mixtures with portland and calcium aluminate cements subject to mineral and biogenic acid attack10.1617/s11527-010-9629-1 ↗
8. Effectiveness of corrosion inhibitors in saturated calcium hydroxide solutions acidified by acid rain components10.1016/j.conbuildmat.2007.12.002 ↗
9. Investigation of acid rain on the deterioration of cement concrete
10. Deterioration of concrete fracture toughness and elastic modulus under simulated acid-sulfate environment10.1016/j.conbuildmat.2018.05.049 ↗
11. Deterioration of fracture toughness of concrete under acid rain environment10.1016/j.engfailanal.2017.02.013 ↗
12. Deterioration mechanism of cementitious materials under acid rain attack10.1016/j.engfailanal.2012.08.007 ↗
13. Degradation modelling of concrete submitted to sulfuric acid attack10.1016/j.cemconres.2013.08.002 ↗
14. Effect of glass powder on sulfuric acid resistance of cementitious materials10.1016/j.conbuildmat.2016.03.049 ↗
15. Resistance of concrete mixtures to cyclic sulfuric acid exposure and mixed sulfates: Effect of the type of aggregate10.1016/j.cemconcomp.2010.10.015 ↗
16. Mechanical properties and durability of concrete specimens containing nano silica in sulfuric acid rain condition10.1016/j.conbuildmat.2018.01.137 ↗
17. Resistance of limestone mortars with quaternary binders to sulfuric acid solution10.1016/j.conbuildmat.2011.06.050 ↗
18. Investigation of the influence of blast-furnace slag on the resistance of concrete against organic acid or sulphate attack by means of accelerated degradation tests10.1016/j.cemconres.2011.09.009 ↗
19. Local study of the corrosion kinetics of hardened Portland cement under acid attack10.1016/j.cemconres.2016.09.007 ↗
20. Durability of proprietary cementitious materials for use in wastewater transport systems10.1016/S0958-9465(02)00082-3 ↗
21. An experimental study of combined acid and sulfate attack of concrete10.1016/S0958-9465(03)00123-9 ↗
22. Accelerated ageing of an EAF black slag by carbonation and percolation for long-term behaviour assessment10.1016/j.jenvman.2014.03.011 ↗
23. Effect of simulated acid rain on deterioration of concrete
24. Deterioration of compressive property of concrete under simulated acid rain environment10.1016/j.conbuildmat.2010.04.002 ↗
25. On the I-II mixed mode fracture of granite using four-point bend specimen10.1111/ffe.12422 ↗
26. Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete10.1016/j.conbuildmat.2016.07.061 ↗
27. Effect of fiber and aggregate size on mode-I fracture parameters of high strength concrete
28. Experimental investigation of the effects of aggregate size distribution on the fracture behaviour of high strength concrete10.1016/j.conbuildmat.2017.05.142 ↗
29. Investigation on effect of aggregate on three non-destructive testing properties of concrete subjected to sulfuric acid attack10.1016/j.conbuildmat.2016.04.017 ↗
30. An experimental investigation on the erosion resistance of concrete containing various PET particles percentages against sulfuric acid attack10.1016/j.conbuildmat.2014.12.037 ↗
31. Response of concrete to accelerated physical salt attack exposure10.1016/j.cemconres.2015.02.006 ↗
32. A study on influences of acid rain in southwest China on concrete
33. Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Standard for test methods of long-term performance and durability of ordinary concrete, China Architecture & Building Press, 2009.
34. Investigation of the effects of acid rain on the deterioration of cement concrete using accelerated tests established in laboratory10.1016/j.atmosenv.2004.05.017 ↗
35. Acid depositions and concrete attack: main influences10.1016/S0008-8846(97)00193-2 ↗
36. Investigating the failure process of concrete under the coupled actions between sulfate attack and drying-wetting cycles by using X-ray CT10.1016/j.conbuildmat.2016.01.040 ↗
37. Influence of age loading, water-cement ratio and rate of loading on fracture energy of concrete10.1007/BF02472745 ↗
38. Fracture properties and brittleness of high-strength concrete
39. A Loading rate dependent cohesive model for concrete fracture10.1016/j.engfracmech.2011.12.013 ↗
40. Fracture behavior of high-srength concrete at a wide range of loading rates10.1016/j.ijimpeng.2009.04.007 ↗
41. Effect of a specimen geometry and testing method on mixed mode I-II fracture toughness of a limestone rock from Saudi Arabia10.1007/s006030070006 ↗
42. Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Standard for test method of mechanical properties on ordinary concrete, China Architecture & Building Press, 2003.
43. Mixed-mode fracture: The four-point shear specimen10.1016/0956-7151(90)90037-H ↗
44. A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks10.1115/1.3601206 ↗
45. Elastic-plastic analysis of cracks on bimaterial interfaces: part I—small scale yielding10.1115/1.3173676 ↗
46. Tada · 2000
47. Elastic displacements for various edge-cracked plate specimens10.1007/BF00185262 ↗
48. Chemical reagent--Preparations of reagent solutions for use in test methods (GB/T603-2002), China Standards Press, 2002.
49. A crystallographic study of the low-temperature dehydration products of gypsum, CaSO4· 2H2O: hemihydrate, CaSO4·0.5H2O, andγ-CaSO4
50. The modelling of dehydration and stress analysis of gypsum plasterboards exposed to fire10.1016/0927-0256(96)00019-5 ↗
51. Predicting the thermal response of gypsum board subjected to a constant heat flux10.1002/fam.971 ↗
52. Numerical investigation of simultaneous heat and mass transfer mechanisms occurring in a gypsum board exposed to fire conditions10.1016/j.applthermaleng.2010.03.006 ↗
53. Influence of cement on properties of fly-ash-based concrete
54. The use of thermal analysis in assessing the effect of temperature on a cement paste10.1016/j.cemconres.2004.06.015 ↗
55. A. Noumowé, Effet des hautes températures (20 C–600 C) sur le béton, Cas particulier des bétons à, 1995.
56. G. Platret, Suivi de l’hydratation du ciment et de l’évolution des phases solides dans les bétons par analyse thermique, caractéristiques microstructurales et propriétés relativesa la durabilité des bétons. méthodes de mesure et d’essai de laboratoire, Méthode d’essai 58 (2002).
57. Microstructural investigation of deteriorated Portland cement concretes10.1016/0950-0618(95)00066-6 ↗
58. Field testing and instrumentation of rock, ASTM, STP554, 1974.
59. Standard for test methods of engineering rock mass (GB/T 50266-2013), China Planning Press, 2013.
60. Fracture properties of high strength concrete with varying silica fume content and aggregates10.1016/0008-8846(95)00043-C ↗
61. Thin-section fiber reinforced concrete and ferrocement