Temperature effects on the bond behavior between deformed steel reinforcing bars and hybrid fiber-reinforced strain-hardening cementitious composite
Source abstract
Abstract
Abstract The authors have recently developed a hybrid fiber-reinforced strain-hardening cementitious composite (HFR-SHCC) using steel and polyvinyl alcohol (PVA) fibers. When subjected to high temperatures (up to 800 °C), this HFR-SHCC retains a higher proportion of its tensile strength compared to SHCCs containing only PVA fibers. The objective of the current study is to experimentally investigate whether the improved material properties of HFR-SHCC at high temperatures lead to better bond with conventional deformed steel reinforcing bars (rebar) compared to other SHCCs and conventional concretes. Rebar pullout specimens with a deformed rebar centrally embedded inside a SHCC/concrete cylinder were used in this study to determine the rebar-matrix bond. The bond behavior of HFR-SHCC with deformed steel rebar was compared with two concretes of different compressive strengths, a commonly used PVA-SHCC containing only PVA fibers, and a PVA-SHCC with very high content of fly ash. The rebar pullout specimens were subjected to temperatures of 100 °C, 200 °C, 400 °C, 600 °C and 800 °C and were tested after cooling down to room temperature to determine the residual bond strength. Results show that while the specimens made with the conventional concretes exhibit the largest bond strength at room temperature, the specimens made with HFR-SHCC retain the largest proportion of their room temperature bond strengths after exposure to high temperatures and show a more ductile pullout behavior instead of the abrupt splitting failure exhibited by the other materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Rationale for suggested development, splice, and standard hook provisions for deformed bars in tension
2. Willam · 2009
3. Concrete at high temperatures – a general review10.1016/0379-7112(88)90033-1 ↗
4. CEN, Eurocode 2: Design of concrete structures. Part 1-2: General rules – Structural fire design (EN 1992-1-2:2004), European Committee for Standardization, Brussels, Belgium, 2004.
5. Effect of fire on concrete and concrete structures10.1002/pse.51 ↗
6. Probabilistic fire analysis: material models and evaluation of steel structural members10.1061/(ASCE)ST.1943-541X.0001285 ↗
7. Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature10.1016/j.conbuildmat.2010.11.064 ↗
8. Spalling in high strength concrete exposed to fire – concerns, causes, critical parameters and cures
9. Effect of high temperatures on high performance steel fibre reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
10. Steel fibers pull-out after exposure to high temperatures and its contribution to the residual mechanical behavior of high strength concrete10.1016/j.conbuildmat.2017.12.129 ↗
11. Bond strength at high temperatures10.1680/macr.1981.33.115.75 ↗
12. Further responses of the bond in reinforced concrete to high temperatures10.1680/macr.1983.35.124.157 ↗
13. Response of the bond in reinforced concrete to high temperatures10.1680/macr.1983.35.123.67 ↗
14. The anchorage capacity of reinforcing bars at normal and high temperatures10.1680/macr.1982.34.121.213 ↗
15. V. Reichel, How fire affects steel-to-concrete bond, Batiment International, Building Research and Practice 6(3) (1978) 176-176.10.1080/09613217808550674 ↗
16. The effects of material properties on bond strength between reinforcing bar and concrete exposed to high temperature10.1016/j.conbuildmat.2016.02.213 ↗
17. Residual bond strength between steel bars and concrete after elevated temperatures10.1016/j.firesaf.2009.04.001 ↗
18. Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete10.1016/j.firesaf.2007.11.002 ↗
19. Bond after fire10.1016/j.conbuildmat.2016.11.131 ↗
20. Evolution of the bond strength between reinforcing steel and fibre reinforced concrete after high temperature exposure10.1016/j.conbuildmat.2018.05.065 ↗
21. FIB, Model code for concrete structures 2010, International Federation for Structural Concrete, Lausanne, Switzerland, 2013.10.1002/9783433604090 ↗
22. On engineered cementitious composites (ECC)10.3151/jact.1.215 ↗
23. Durability of strain-hardening cement-based composites (SHCC)10.1617/s11527-012-9845-y ↗
24. On engineered cementitious composites: a review of the material and its applications10.3151/jact.1.215 ↗
25. High-performance and multifunctional cement-based composite material10.1016/j.eng.2018.11.031 ↗
26. Assessing mechanical properties and microstructure of fire-damaged engineered cementitious composites
27. Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures10.1061/(ASCE)MT.1943-5533.0000335 ↗
28. Effect of elevated temperature on strain-hardening engineered cementitious composites10.1016/j.conbuildmat.2014.07.052 ↗
29. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
30. Influence of high temperatures on the residual mechanical properties of a hybrid fiber-reinforced strain-hardening cementitious composite10.1016/j.conbuildmat.2019.02.129 ↗
31. Bond behavior of reinforcing bars in tensile strain-hardening fiber-reinforced cement composites
32. Bond-splitting strength of reinforced strain-hardening cement composite elements with small bar spacing10.14359/51687228 ↗
33. Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members10.1617/s11527-014-0475-4 ↗
34. Bond and cracking behavior of lap-spliced reinforcing bars embedded in hybrid fiber reinforced strain-hardening cementitious composite (SHCC)10.1016/j.compositesb.2016.09.086 ↗
35. Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures10.1016/j.firesaf.2017.06.006 ↗
36. Development of a Steel-PVA Hybrid Fiber SHCC
37. Behaviour of engineered cementitious composites and hybrid engineered cementitious composites at high temperatures10.1016/j.conbuildmat.2017.10.077 ↗
38. Fire resistance of strain hardening cementitious composite with hybrid PVA and steel fibers10.1016/j.conbuildmat.2016.12.204 ↗
39. ACI, Bond and development of straight reinforcing bars in tension (ACI 408R-03), American Concrete Institute, Farmington Hills, MI, 2003.
40. FIB, Bond of reinforcement in concrete (bulletin no. 10, state-of-art report), International Federation for Structural Concrete, Lausanne, Switzerland, 2000.
41. Engineered cementitious composites with high-volume fly ash
42. ASTM, Standard specification for Portland cement (ASTM C150/C150M-17), American Society for Testing and Materials, West Conshohocken, PA, 2017.
43. ASTM, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete (ASTM C618-17a), American Society for Testing and Materials, West Conshohocken, PA, 2017.
44. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)
45. RILEM, Technical recommendations for the testing and use of construction materials, International Union of Testing and Research Laboratories for Materials and Structures, Paris, France, 1994.10.1201/9781482271362 ↗
46. Bond with Reinforcing Steel
47. Cengel · 2003
48. ISO, Fire-resistance tests - Elements of building construction - Part 1: General requirements, International Organization for Standardization, Geneva, Switzerland, 1999.
49. ASTM, Standard test method for compressive strength of cylindrical concrete specimens (ASTM C39/C39M-17b), American Society for Testing and Materials, West Conshohocken, PA, 2017.
50. ASTM, Standard test method for splitting tensile strength of cylindrical concrete specimens (ASTM C496/C496M – 17), American Society for Testing and Materials, West Conshohocken, PA, 2017.
51. DeJong · 2005
52. Properties of concrete at elevated temperatures,10.1155/2014/468510 ↗
53. Mechanical properties of high-strength concrete after fire10.1016/j.cemconres.2003.11.007 ↗
54. Effect of exposure time and rates of heating and cooling on residual strength of heated concrete10.1680/macr.1986.38.136.151 ↗
55. ACI, Building code requirements for structural concrete (ACI 318-14) and commentary, American Concrete Institute, Farmington Hills, MI, 2014.
56. J.G. MacGregor, J.K. Wight, Reinforced concrete: mechanics and design (6th ed.), Prentice Hall Upper Saddle River, NJ2011.
57. Local bond stress-slip models for reinforcing bars and prestressing strands in high-peformance fiber-reinforced cement composites
58. Thermal properties of concrete under sustained elevated temperatures