journal article·2020-03

A novel non-Portland cementitious material: Mechanical properties, durability and characterization

Shengbo Zhou, Cong Ma, Guangcheng Long, Youjun Xie

Publisher page

Abstract

Abstract One-part geopolymers are environmental-friendly construction materials and more convenient for operating in situ in comparison to conventional two-part geopolymers. A special type of fly ash (FASB) was confirmed as a novel material for preparing one-part geopolymer. This research systematically studied the properties by investigating fresh performance, strength development, sulfate resistance, acid resistance and drying shrinkage of Na2SiO3-anhydrous activated one-part geopolymer mortars with both FASB and ground granulated blast furnace slag (GGBS). The results indicate that the presence of FASB improves the workability, volume stability and sulfate and acid resistance in varying degrees, even though the replacement of GGBS by FASB decreases the compressive strength. SEM imaging detects that the addition of FASB makes the microstructure of one-part geopolymer more homogeneous. The hydration kinetics of FASB-GGBS-based one-part geopolymer is similar to that of conventional two-part geopolymer, and the initial heat release rate, induction duration and value and arrival time of the second peak are dependent upon the proportion of FASB and GGBS. Gelatinous minerals are the main reaction products in one-part non-Portland cement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Carbon dioxide emissions and climate change: policy implications for the cement industry10.1016/j.envsci.2004.12.006 ↗
2. A review on emission analysis in cement industries10.1016/j.rser.2011.02.014 ↗
3. A calculation model for compressive strength of cleaner earth-based construction with a high-efficiency stabilizer and fly ash10.1016/j.jclepro.2018.02.153 ↗
4. Evaluating CO2 emission performance in China’s cement industry: an enterprise perspective10.1016/j.apenergy.2015.11.006 ↗
5. Multiscale investigations on hydration mechanisms in seawater OPC paste10.1016/j.conbuildmat.2018.10.010 ↗
6. A review on fly ash characteristics–towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
7. Geopolymer concrete: a review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
8. A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering10.1016/j.compositesb.2016.02.002 ↗
9. One-part geopolymer mixes from geothermal silica and sodium aluminate10.1021/ie8006825 ↗
10. Thermal activation of albite for the synthesis of one-part mix geopolymers10.1111/j.1551-2916.2011.04925.x ↗
11. One-part geopolymers based on thermally treated red mud/NaOH blends10.1111/jace.13231 ↗
12. Utilization of low-quality desulfurized ash from semi-dry flue gas desulfurization by mixing with hemihydrate gypsum10.1016/j.fuel.2019.115783 ↗
13. Characterisation of one-part geopolymer binders made from fly ash10.1007/s12649-016-9582-5 ↗
14. Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China10.1016/j.jclepro.2018.08.060 ↗
15. Development of greener alkali-activated cement: utilisation of sodium carbonate for activating slag and fly ash mixtures10.1016/j.jclepro.2015.12.010 ↗
16. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
17. Synthesis, characterization and mechanisms of one-part geopolymeric cement by calcining low-quality kaolin with alkali10.1617/s11527-014-0350-3 ↗
18. Synthesis and strength optimization of one-part geopolymer based on red mud10.1016/j.conbuildmat.2016.02.099 ↗
19. Workability loss and compressive strength development of cementless mortars activated by combination of sodium silicate and sodium hydroxide10.1061/(ASCE)0899-1561(2009)21:3(119) ↗
20. Microstructure and performance of fly ash micro-beads in cementitious material system10.1016/j.conbuildmat.2013.11.040 ↗
21. Properties and characterization of green one-part geopolymer activated by composite activators10.1016/j.jclepro.2019.02.159 ↗
22. An investigation into the strength development of wastepaper sludge ash blended with ground granulated blastfurnace slag10.1016/j.cemconres.2009.07.001 ↗
23. Effect of triethanolamine hydrochloride on the performance of cement paste10.1016/j.conbuildmat.2018.12.124 ↗
24. The use of high calcium wood ash in the preparation of Ground Granulated Blast Furnace Slag and Pulverized Fly Ash geopolymers: a complete microstructural and mechanical characterization10.1016/j.jclepro.2017.04.026 ↗
25. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
26. Design and preparation of ultra-high performance concrete with low environmental impact10.1016/j.jclepro.2018.12.318 ↗
27. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: effect of slag and alkali activators10.1016/j.jclepro.2019.03.290 ↗
28. Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems10.1016/j.cemconcomp.2013.11.010 ↗
29. Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages10.1016/j.cemconcomp.2014.07.007 ↗
30. Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature10.1016/j.conbuildmat.2013.05.107 ↗
31. Sulphate resistance of geopolymer concrete prepared from blended waste fuel ash10.1061/(ASCE)MT.1943-5533.0001030 ↗
32. Characterization on the recycling of waste seashells with Portland cement towards sustainable cementitious materials10.1016/j.jclepro.2019.02.122 ↗
33. An investigation of the microstructure and durability of a fluidized bed fly ash–metakaolin geopolymer after heat and acid exposure10.1016/j.matdes.2015.03.009 ↗
34. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
35. The role of Al in C S H: NMR, XRD, and compositional results for precipitated samples10.1016/j.cemconres.2005.03.002 ↗
36. Clean and low-alkalinity one-part geopolymeric cement: Effects of sodium sulfate on microstructure and properties