journal article·2020-04

Performance evaluation of new warm mix asphalt and water stability of its mixture based on laboratory tests

Ke Zhang, Yaofei Luo, Fei Chen, Feifei Han

Publisher page

Abstract

Abstract To confirm the reliability of self-developed ZYF-1 warm mix additive and provide some references for the promotion and application of ZYF-1, the conventional performance test and Strategic Highway Research Program (SHRP) test of SK90# asphalt and SBS modified asphalt containing ZYF-1 were conducted. The commonly used warm mix additives of Sasobit and Aspha-min were also tested. Meanwhile, the splitting test and Cantabro test of warm mix asphalt mixture before and after freeze-thaw cycles were conducted to evaluate the long-term water stability. The beam fatigue test and Wheel Tracking test were also carried out to verify other road performance of asphalt mixture with ZYF-1. The results show that ZYF-1 greatly improves the low temperature property of asphalt and has little adverse effect on high temperature performance. After mixed with Sasobit and Aspha-min additive, the high temperature property of asphalt is improved, but the low temperature performance is weakened. ZYF-1 and Sasobit significantly reduces the high temperature viscosity of asphalt binder, while Aspha-min makes the viscosity slightly increase. 4% by the weight of asphalt is recommended as the reasonable dosage for ZYF-1 based on the variation of asphalt performance. Freeze-thaw cycle simulation obviously influences the water stability of warm mix asphalt mixture, and 15 freeze-thaw cycles are recommended for the evaluation of water stability. Among tested additives, the deterioration range of water stability for asphalt mixture caused by ZYF-1 is the smallest. The warm mix asphalt mixture containing ZYF-1 effectively reduce the construction temperature while ensuring the road performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Warm mix asphalt: an overview10.1016/j.jclepro.2011.11.053 ↗
2. Influence of chemical additives and wax modifiers on odor emissions of road asphalt10.1016/j.conbuildmat.2018.06.168 ↗
3. Pavement engineering materials: Review on the use of warm-mix asphalt10.1016/j.conbuildmat.2012.06.038 ↗
4. Review of warm mix rubberized asphalt concrete: Towards a sustainable paving technology10.1016/j.jclepro.2017.12.245 ↗
5. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives10.1016/j.conbuildmat.2012.07.074 ↗
6. The engineering, economic, and environmental performance of terminal blend rubberized asphalt binders with wax-based warm mix additives10.1016/j.jclepro.2018.03.011 ↗
7. Influence of warm-mix additives on physical, rheological, and morphological properties of high-viscosity asphalt10.1061/(ASCE)MT.1943-5533.0002499 ↗
8. Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders10.1016/j.conbuildmat.2012.04.004 ↗
9. Investigation of the effects of wax additive on the properties of asphalt binder10.1016/j.conbuildmat.2012.06.024 ↗
10. Permanent deformation characteristics of warm asphalt binders under reduced aging conditions10.1007/s12205-017-1903-0 ↗
11. High temperature performance of asphalt modified with Sasobit and Deurex10.1016/j.conbuildmat.2017.12.164 ↗
12. Evaluation of mechanical performance and modification mechanism of asphalt modified with graphene oxide and warm mix additives10.1016/j.jclepro.2018.05.040 ↗
13. Rheological investigations on warm mix asphalt binders at high and intermediate temperature ranges10.1061/(ASCE)MT.1943-5533.0002027 ↗
14. Rheological properties of Deurex - modified WMA binder containing SBS10.1080/10916466.2018.1437633 ↗
15. Effect of warm mix asphalt chemical additives on the mechanical performance of asphalt binders10.1617/s11527-017-1096-5 ↗
16. Effects of wax-based, chemical-based, and water-based warm-mix additives on mechanical performance of asphalt binders10.1061/(ASCE)MT.1943-5533.0002441 ↗
17. Effect of WMA additive on properties of PPA-modified asphalt binders containing anti-stripping agent
18. Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm10.1016/j.jclepro.2017.04.168 ↗
19. Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement and crumb rubber10.1016/j.jclepro.2017.07.079 ↗
20. Influence of warm mix additive and loading rate on rutting of warm mix asphalt pavement10.1080/10298436.2017.1293269 ↗
21. Mechanical behavior of asphalt mixtures containing silica gels as warm additives10.1617/s11527-018-1214-z ↗
22. Laboratory investigation of crumb rubber modified asphalt binder and mixtures with warm-mix additives10.1007/s40999-016-0040-3 ↗
23. Volumetric characteristics and compactability of asphalt rubber mixtures with organic warm mix asphalt additives
24. J. Mater. Civ. Eng. · 2017 · 29 · 0601701710.1061/(ASCE)MT.1943-5533.0002085 ↗
25. Assessing moisture sensitivity of rubberized warm mix asphalt mixtures using the surface free energy method and dynamic water pressure tester10.1520/JTE20170241 ↗
26. Effect of warm mix additives on the interfacial bonding characteristics of asphalt binders10.1080/10298436.2016.1240563 ↗
27. Moisture resistance study on PE-wax and EBS-wax modified warm mix asphalt using chemical and mechanical procedures10.1016/j.conbuildmat.2018.08.216 ↗
28. Moisture susceptibility of warm mix asphalt (WMA) with an organic wax additive based on X-Ray computed tomography (CT) technology
29. Hurley · 2005
30. Hurley · 2005
31. Mechanism and effectiveness of a silicone-based warm mix additive10.1061/(ASCE)MT.1943-5533.0002536 ↗
32. Moisture characteristics of mixtures with warm mix asphalt technologies - a review10.1016/j.conbuildmat.2017.03.069 ↗
33. F. Chen, Research · 2013
34. Influence of different warm-mixed agent on asphalt mixture
35. Research on rheological properties of warm mix asphalt mortar
36. Study of road performance of Aspha-min warm mix asphalt mixture
37. Evaluation of natural zeolite as warm mix asphalt additive and its comparison with other warm mix additives10.1016/j.conbuildmat.2013.02.026 ↗
38. Evaluation of mixture characteristics of warm mix asphalt involving natural and synthetic zeolite additives10.1016/j.conbuildmat.2014.01.093 ↗
39. JTG FF0-2004, Technical specification for construction of highway asphalt pavements, China Communications Press, Beijing, 2004.
40. ASTM D5-06, Standard test method for penetration of bituminous materials, ASTM International, West Conshohocken, PA, 2006.
41. ASTM D36-95, Test method for softening point of bitumen (ring-and-ball apparatus), ASTM International, West Conshohocken, PA, 2000.
42. ASTM D113-17 Standard test method for ductility of asphalt materials, ASTM International, West Conshohocken, PA, 2017.
43. ASTM D4402-06, Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer, ASTM International, West Conshohocken, PA, 2006
44. ASTM D7175-15, Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer, ASTM International, West Conshohocken, PA, 2015.
45. Laboratory investigation of phase change effect of polyethylene glycolon on asphalt binder and mixture performance10.1016/j.conbuildmat.2019.03.308 ↗
46. The impact of bio-oil as rejuvenator for aged asphalt binder10.1016/j.conbuildmat.2018.10.168 ↗
47. ASTM D6648-08, Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR), ASTM International, West Conshohocken, PA, 2008.
48. JTG E20-2011, Standard test methods of bitumen and bituminous mixtures for highway engineering, China Communications Press, Beijing, 2011.
49. Research on road performance of SBS modified asphalt mixture with warm mix additive of EC-120
50. AASHTO M320-17, Standard specification for performance-graded asphalt binder, American Association of State Highway and Transportation Officials, Washington DC, 2017.