journal article·2020-07

Properties of roller-compacted concrete pavement containing waste aggregates and nano SiO2

Davoud Tavakoli, Rahbar Sakenian Dehkordi, Hassan Divandari, Jorge de Brito

Publisher page

Abstract

Abstract This study deals with the use of waste materials as replacement of fine aggregate in roller-compacted concrete pavement (RCCP). To achieve this, waste ceramic, waste concrete, and waste glass were initially crushed and mixed and then replaced natural fine aggregate at varying amounts in RCCP. Furthermore, to mitigate the probable negative effects of waste aggregates and also to improve the mechanical properties of cement paste, nano SiO2 was employed in the mixes design. After preparing the mixes, Vebe time, compressive strength, splitting tensile strength, water absorption, abrasion resistance, and skid resistance were measured. The results show that more than 40% of sand replacement with waste materials could have a negative effect on the properties of RCCPs. However, this impact is negligible up to 10% of waste material proportions. The compressive strength of the mixes containing waste materials was lower than that of the control mix, except for the sample containing 10% ceramic waste. In terms of water absorption, mixes with waste materials had higher water absorption than the control mix. Besides, abrasion somewhat increased as a result of adding waste materials, except for the samples containing 10% glass and 10% ceramic wastes that showed a slight decrease. Moreover, mixes with waste materials had higher skid resistance than the control mix. Overall, waste ceramic mixes showed better mechanical properties and waste glass mixes had better performance in terms of water absorption. In addition, using nano SiO2 leads to improve the mechanical properties of the RCCP; the optimum content of nano SiO2 has determined to be 0.7% of cement weight.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Use of waste materials in concrete: a review
2. Properties of concrete made with waste clay brick as sand incorporating nano SiO210.17485/ijst/2014/v7i12.1 ↗
3. Using of backpropagation neural network in estimating of compressive strength of waste concrete
4. EPA, Construction and Demolition Debris Generation in the United States, 2015, Office of Resource Conservation and Recovery, 2018. https://www.epa.gov/sites/production/files/2018-09/documents/construction_and_demolition_debris_generation_in_the_united_states_2015_final.pdf.
5. A.D. Buck. Recycled concrete. Highway Research Board, Washington D.C, Highway Research Record No. 430, 1-8 (1973).
6. Effect of the quality of parent concrete on the properties of high performance recycled aggregate concrete10.1016/j.conbuildmat.2014.12.035 ↗
7. Mechanical behaviour of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2006.12.004 ↗
8. Performance enhancement of recycled concrete aggregate–a review10.1016/j.jclepro.2015.08.057 ↗
9. Performance characteristics of recycled concrete aggregate as an unbound pavement material10.1016/j.heliyon.2019.e02494 ↗
10. Properties of recycled concrete aggregate and their influence in new concrete production10.1016/j.resconrec.2018.02.005 ↗
11. Secondary recycling of electrical insulator porcelain waste in Portland concrete structures: determination of the performance under accelerated aging10.1590/S0366-69132006000300008 ↗
12. Ecoefficient concretes: impact of the use of white ceramic powder on the mechanical properties of concrete10.1016/j.biosystemseng.2007.01.004 ↗
13. Ecoefficient concretes: the effects of using recycled ceramic material from sanitary installations on the mechanical properties of concrete10.1016/j.wasman.2008.06.018 ↗
14. Properties of concretes produced with waste ceramic tile aggregate
15. Reusing waste ceramic and waste sanitary ware in concrete as pozzolans with nano-silica and metakaolin
16. Mechanical properties of structural concrete with fine recycled ceramic aggregates10.1016/j.conbuildmat.2014.04.037 ↗
17. C. Mayer, S. Baxter. Use of recycled glass for concrete masonry blocks Final Report (No. PB-98-158934/XAB), Columbia Univ., Dept. of Civil Engineering and Engineering Mechanics, New York (1997).
18. C. Mayer, S. Baxter. Use of recycled glass and fly ash for precast. Report No. NYSERDA 98-18 (4292-IABR-IA-96) to New York State Energy Research and Development Authority, Department of Civil Engineering Mechanics, Columbia University, New York (1998).
19. Properties of concrete containing waste glass10.1016/j.cemconres.2003.07.003 ↗
20. Properties of concrete made with recycled crushed glass at elevated temperatures10.1016/j.buildenv.2005.02.018 ↗
21. Technical and environmental effects of concrete production: dry batch versus central mixed plant10.1016/j.jclepro.2010.04.022 ↗
22. A comparative study on the feasible use of recycled beverage and CRT funnel glass as fine aggregate in cement mortar10.1016/j.jclepro.2012.02.018 ↗
23. Recycling of waste glass as a partial replacement for fi ne aggregate in concrete10.1016/j.wasman.2008.08.012 ↗
24. Evaluation of the durability of concrete made with crushed glass aggregates10.1016/j.jclepro.2012.09.021 ↗
25. Recycled waste glass as fine aggregate replacement in cementitious materials based on Portland cement10.1016/j.conbuildmat.2014.08.092 ↗
26. Characteristics of cement mortar with nano SiO2 particles10.1016/j.conbuildmat.2005.12.020 ↗
27. A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles10.1016/j.conbuildmat.2012.07.110 ↗
28. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
29. Abrasion resistance of concrete containing SiO2 and Al2O3 nanoparticles in different curing media10.1016/j.enbuild.2011.07.022 ↗
30. Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: a review10.1016/j.conbuildmat.2018.05.266 ↗
31. Influence of nano-SiO2 on properties of fresh and hardened high performance concrete: a state-of-the-art review10.1016/j.conbuildmat.2017.05.059 ↗
32. Use of concrete road recycled aggregates for Roller Compacted Concrete10.1016/j.conbuildmat.2009.08.040 ↗
33. Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete10.1016/j.conbuildmat.2011.04.004 ↗
34. Evaluating the effect of crumb rubber and nano SiO2 on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques
35. The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement10.1016/j.conbuildmat.2018.02.216 ↗
36. The effect of reclaimed asphalt pavement and crumb rubber on mechanical properties of roller compacted concrete pavement10.1016/j.conbuildmat.2017.01.136 ↗
37. Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica10.1016/j.conbuildmat.2018.03.138 ↗
38. ASTM C33. Standard specification for concrete aggregates. American Society for Testing and Material, West Conshohocken, PA (2016).
39. ASTM C1176. Standard test method for making roller-compacted concrete in cylinder molds using a vibrating table. American Society for Testing and Material, West Conshohocken, PA (2002).
40. ASTM C192/C 192 M. Standard practice for making and curing concrete test specimens in the laboratory, American Society for Testing and Material, West Conshohocken, PA (2002).
41. BS 1881: Part 116. Method for determination of compressive strength of concrete cubes, British Standards Institution, London, UK (1983).
42. ASTM C642-1. Standard test method for density, absorption, and voids in hardened concrete, American Society for Testing and Material, West Conshohocken, PA (2011).
43. ASTM C496. Standard test method for splitting tensile strength of cylindrical concrete specimens. American Society of Testing and Materials, West Conshohocken, PA (2004).
44. BS EN 1338. Concrete paving blocks requirements and test methods. British Standard Institute, London, UK (2003).
45. Experimental investigation of using cross-linked polyethylene waste as aggregate in roller compacted concrete pavement10.1016/j.jclepro.2017.07.109 ↗
46. Assessing the effects of supplementary cementitious materials on the performance of low-cement roller compacted concrete pavement10.1016/j.conbuildmat.2010.06.003 ↗
47. ACPA guide specification. Roller-compacted concrete pavements as exposed wearing surface. Ver. 1.2, 1–29 (2014).
48. A study on performance of roller-compacted concrete for pavement10.1016/j.conbuildmat.2017.07.135 ↗
49. Microstructural, thermal, physical and mechanical behavior of the self-compacting concrete containing SiO2 nanoparticles10.1016/j.msea.2010.08.095 ↗
50. Abrasion resistance of concrete containing nano-particles for pavement10.1016/j.wear.2005.08.006 ↗
51. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
52. Investigating the effects of using different types of SiO2 nanoparticles on the mechanical properties of binary blended concrete10.1016/j.compositesb.2013.04.035 ↗
53. Effects of nanomaterials on hardening of cement–silica fume–fly ash-based ultra-high-strength concrete10.1680/jadcr.15.00080 ↗
54. Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features10.1016/j.msea.2010.09.024 ↗
55. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
56. Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach10.1016/j.cemconres.2004.10.025 ↗
57. Study on microstructure and bond strength of interfacial transition zone between cement paste and high-performance lightweight aggregates prepared from ferrochromium slag10.1016/j.conbuildmat.2017.03.083 ↗
58. Verian · 2012
59. Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials10.1016/j.conbuildmat.2015.10.066 ↗
60. Durability performances of concrete with nano-silica10.1016/j.conbuildmat.2014.10.014 ↗
61. Studies on mechanical properties of concrete containing waste glass aggregate10.1016/j.cemconres.2004.02.006 ↗
62. A study of the effects of LCD glass sand on the properties of concrete10.1016/j.wasman.2008.03.005 ↗
63. Mechanical properties of fly ash concrete composite reinforced with nano-SiO2 and steel fibre
64. Characteristics of concrete with waste glass as fine aggregate replacement
65. Use of recycled CRT funnel glass as fine aggregate in dry-mixed concrete paving blocks10.1016/j.jclepro.2013.12.084 ↗
66. A study on the macro and micro properties of concrete with LCD glass10.1016/j.conbuildmat.2013.09.015 ↗
67. Factors affecting the tensile properties of concrete
68. Study of concrete involving use of waste glass as partial replacement of fine aggregates10.9790/3021-03760813 ↗
69. Investigating the effect of the cement paste and transition zone on strength development of concrete containing nanosilica and silica fume10.1016/j.matdes.2015.03.024 ↗
70. Evaluation of incorporating metakaolin to evaluate durability and mechanical properties of concrete
71. ACI-Committee-318. Building Code Requirements for Structural Concrete (ACI 318–99) and Commentary (318R–99). Farmington Hills, Mich., 1999.
72. Evaluation of the Time Dependent Behaviour of Concrete. Bulletin d’Information No. 199, Comité Européen du Béton/Fédération Internationale de la Précontrainte, Lausanne, 1991.
73. Re-examination of the relation between splitting tensile and compressive strength of normal weight concrete
74. Structural properties of high strength concrete and its implications for precast prestressed concrete10.15554/pcij.11011985.92.119 ↗
75. Characterization of pervious concrete with blended natural aggregate and recycled concrete aggregates10.1016/j.jclepro.2018.01.205 ↗
76. Behavioural study of pavement quality concrete containing construction, industrial and agricultural wastes10.1016/j.ijprt.2018.03.007 ↗
77. Influence and mechanism of micro/nano-mineral admixtures on the abrasion resistance of concrete10.1016/j.conbuildmat.2018.11.224 ↗
78. Paving blocks made with recycled concrete aggregate and crushed clay brick10.1016/j.conbuildmat.2005.01.044 ↗
79. Characterization of pavement texture by means of height difference correlation and relation to wet skid resistance