A review of properties of bio-fibrous concrete exposed to elevated temperatures
Source abstract
Abstract
Abstract The use of natural fibers in cementitious composites has helped in eco-sustainability and green constructions. The susceptibility of bio-fibrous concrete (BFC) to fire is inevitable as its usage increases globally. Critical understanding of the residual properties of BFC is vital to its safety design criteria and acceptability of its use. Researches on the post-fire performances of steel and synthetic fibrous concrete at elevated temperatures have been reviewed extensively. However, there is no review yet on the high-temperature performance of BFC, despite the attention it currently receives from researchers. Therefore, this paper presents a comprehensive review of the residual properties of BFC after exposure to elevated temperature. It was discovered from the reports that the critical temperature for BFC is at the temperature range of 300–400C. However, lignocellulose fibers (jute, coir, hemp, sisal and hybrids) are beneficial to mitigating micro-cracks and explosive spalling in the heated high-performance concrete and ultra-high-performance concrete, as compared with unreinforced concrete composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Fire dynamics and safety research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. The effect of high temperatures on the mechanical properties of concrete made with different types of aggregates10.1016/j.firesaf.2011.07.002 ↗
2. Properties of Concrete at Elevated Temperatures10.1155/2014/468510 ↗
3. Malhotra · 1987
4. Stradling, The resistance to fire of concrete and reinforced concrete, Engineering. 114(2929) (1922) 341–344, 380–382
5. Steel fibre reinforced concrete at elevated temperatures10.1016/0262-5075(84)90006-X ↗
6. An experimental study of the mechanical properties of fibre reinforced polymer (FRP) and steel reinforcing bars at elevated temperatures10.1016/j.compstruct.2006.04.069 ↗
7. The effect of different fibres on the flexural behaviour of concrete exposed to normal and elevated temperatures10.1016/j.conbuildmat.2016.10.089 ↗
8. Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete10.1016/j.conbuildmat.2017.10.129 ↗
9. Journal of Structural Fire Engineering For Authors Performance of hybrid fibre-reinforced concretes at elevated temperatures10.1108/JSFE-01-2017-0007 ↗
10. Mechanical properties of concrete composites subject to elevated temperature10.1016/j.firesaf.2017.10.010 ↗
11. Kodur, Mechanical Properties of Fibre-Reinforced Concrete at
12. D. Bhattacharyya, A. Subasinghe, N.K. Kim, Natural fibers: Their composites and flammability characterizations, Elsevier Inc., 2015. https://doi.org/10.1016/B978-0-323-26434-1.00004-0.10.1016/B978-0-323-26434-1.00004-0 ↗
13. Effect of removing polypropylene fibre surface finishes on mechanical performance of kenaf/polypropylene composites10.1016/j.compositesa.2011.07.023 ↗
14. Influence of natural fibre reinforcements on the flammability of bio-derived composite materials10.1016/j.compositesb.2012.04.051 ↗
15. Mechanical properties of natural fibre reinforced polyester composites: Jowar, sisal and bamboo10.1016/j.matdes.2011.03.015 ↗
16. A review on the degradability of polymeric composites based on natural fibres10.1016/j.matdes.2012.11.025 ↗
17. Microstructure and mechanical properties of Green concrete composites containing coir fibre
18. Application of chopped basalt fibers in reinforced mortar: A review10.1016/j.conbuildmat.2017.12.245 ↗
19. Durability properties of engineered pulp fibre reinforced concretes made with and without supplementary cementitious materials10.1016/j.compositesb.2019.05.070 ↗
20. Plant-based natural fibre reinforced cement composites: A review10.1016/j.cemconcomp.2016.02.014 ↗
21. Experimental Study of Kenaf Bio Fibrous Concrete
22. A review of the properties of hemp concrete for green building applications10.1016/j.jclepro.2019.117852 ↗
23. Various Industrial Applications of Hemp, Kinaf, Flax and Ramie Natural Fibres
24. A review on pineapple leaf fibers, sisal fibers and their biocomposites10.1002/mame.200400132 ↗
25. High-performance fiber-reinforced concrete: a review, Springer
26. Prospects for natural fibre reinforced concretes in construction10.1016/0262-5075(81)90006-3 ↗
27. Properties and Applications of Fiber Reinforced Concrete
28. The Use of Sisal Fibre As Reinforcement in Cement-Based Composites10.1590/1807-1929/agriambi.v3n2p245-256 ↗
29. Studies on the durability of natural fibres and the effect of corroded fibres on the strength of mortar10.1016/j.cemconcomp.2004.09.008 ↗
30. Review of the history, properties and application of plant fibres
31. A review of natural fiber composites [Jute, Sisal, Kenaf]10.1016/j.matpr.2019.07.113 ↗
32. Green Composites: A Review10.1016/j.matpr.2017.11.034 ↗
33. S.K. S, S.S. Hiremath, Natural Fiber Reinforced Composites in the Context of Biodegradability: A Review, Elsevier Ltd., 2020. https://doi.org/10.1016/b978-0-12-803581-8.11418-3.10.1016/B978-0-12-803581-8.11418-3 ↗
34. Properties of hemp fibre reinforced concrete composites10.1016/j.compositesa.2005.01.032 ↗
35. Evaluation of durability of natural fibre reinforced cement mortar composite-a new approach
36. Mechanical properties of kenaf fiber reinforced concrete10.1016/j.conbuildmat.2010.11.052 ↗
37. The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite10.1016/j.matdes.2010.07.014 ↗
38. Natural fibres as construction materials
39. Performance of Kenaf Fiber Reinforced Concrete
40. Performance Of Kenaf Fibre Reinforced Concrete Under Static And Dynamic Loadings
41. Babatunde · Compressive Creep of Kenaf Bio - Fibrous Concrete Composite Under One Dimensional Stressing · 2016 · 289 · 279
42. Lam · 2017
43. Study of Natural Fibre Reinforced Composites10.1088/1757-899X/404/1/012048 ↗
44. Hemp, jute, banana, kenaf, ramie, sisal fibers
45. Characterization of a precast hemp concrete. Part I: Physical and thermal properties
46. A review of recent developments in natural fibre composites and their mechanical performance10.1016/j.compositesa.2015.08.038 ↗
47. Cementitious building materials reinforced with vegetable fibres: A review10.1016/j.conbuildmat.2010.07.024 ↗
48. Study of Tensile Strength of Agave Americana Fibre Reinforced Hybrid Composites10.1016/j.matpr.2017.07.111 ↗
49. Chemical compositions of natural fibres, Adv. High Strength Nat
50. Properties characterization of chemically modified hemp hurds10.3390/ma7128131 ↗
51. Effect of hemp fibers on fire resistance of concrete10.1016/j.conbuildmat.2018.07.014 ↗
52. Khairul Zaman, Mechanical properties of pineapple leaf fibre reinforced polypropylene composites10.1016/j.matdes.2004.11.009 ↗
53. Fire resistance evaluation of rice husk ash concrete10.1016/j.heliyon.2018.e01035 ↗
54. Comparison between high strength concrete and normal strength concrete subjected to high temperature10.1007/BF02485969 ↗
55. The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete10.1016/j.firesaf.2005.12.002 ↗
56. Behaviour of cement concrete at high temperature
57. Fire resistance of high-volume fly ash mortars with nanosilica addition10.1016/j.conbuildmat.2012.05.028 ↗
58. Change in microstructure of hardened cement paste subjected to elevated temperatures10.1016/j.conbuildmat.2006.11.002 ↗
59. A comprehensive review of spalling and fire performance of concrete members10.56748/ejse.15199 ↗
60. Determining the Condition of Reinforced and Prestressed Concrete Structures Damaged by Elevated Temperatures10.1016/j.proeng.2017.04.533 ↗
61. Estimation of chloride diffusion coefficients of high-strength concrete with synthetic fibres after fire exposure10.1016/j.conbuildmat.2017.03.117 ↗
62. Effects of high temperatures on mechanical behavior of high strength concrete reinforced with high performance synthetic macro polypropylene (HPP) fibres10.1016/j.conbuildmat.2018.01.064 ↗
63. Synergistic effect of combined fibers for spalling protection of concrete in fire10.1016/j.cemconres.2010.06.011 ↗
64. Residual mechanical characteristics and spalling resistance of fiber reinforced self-compacting concretes exposed to elevated temperatures10.1016/j.conbuildmat.2012.11.093 ↗
65. High temperature behaviour of hybrid steel–PVA fibre reinforced reactive powder concrete10.1617/s11527-015-0537-2 ↗
66. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.11.014 ↗
67. Reduction of fire spalling in high-performance concrete by means of superabsorbent polymers and polypropylene fibers: Small scale fire tests of carbon fiber reinforced plastic-prestressed self-compacting concrete10.1016/j.cemconcomp.2014.02.001 ↗
68. Durability of sustainable concrete subjected to elevated temperature – A review10.1016/j.conbuildmat.2018.12.040 ↗
69. High-temperature behaviour of HPC with polypropylene fibres10.1016/S0008-8846(01)00596-8 ↗
70. On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures10.1016/j.firesaf.2005.11.004 ↗
71. Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperatures10.1016/j.cemconres.2003.11.010 ↗
72. A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites10.1016/j.compositesb.2011.10.005 ↗
73. Fire response of Hybrid Fiber Reinforced Concrete to High Temperature10.1016/j.proeng.2017.02.123 ↗
74. Fibre reinforced concrete exposed to elevated temperature10.1088/1757-899X/246/1/012045 ↗
75. Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures10.1016/j.cemconres.2011.06.012 ↗
76. Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete10.1016/j.conbuildmat.2018.09.202 ↗
77. Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.07.001 ↗
78. Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures10.1016/j.conbuildmat.2012.04.120 ↗
79. S. Chandra, L. Berntsson, Lightweight Aggregate Concrete, Revised, Elsevier Science, 2002. https://books.google.com.my/books?id=9mmcbg9qgG0C.10.1016/B978-081551486-2.50009-2 ↗
80. J.M.Y. and W.A.W.A.R. Nur Hafizah Bt Abd Khalid1, Temperature Effects on Tensile Properties of Kenaf Bast Fiber, For. Prod. J. 58 (2011) 59–65.
81. Effect of time at temperature for natural fibres10.1016/j.proeng.2017.07.038 ↗
82. Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites10.1016/j.compositesa.2009.04.031 ↗
83. Potential of Jute Fibre Reinforced Polymer Composites: A Review
84. Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete10.1016/j.cemconcomp.2020.103512 ↗
85. Effects of various fibres on high-temperature spalling in high-performance concrete10.1016/j.conbuildmat.2014.07.068 ↗
86. Compressive Behaviour of Sisal Fibre Reinforced Ternary Concrete At Elevated Temperatures
87. Anthony Nkem Ede and Adebodun Oluwaseyi Aina, Effects of Coconut Husk Fibre and Polypropylene Fibre on Fire Resistance Of Concrete, Int. J. Eng. Sci. Manag. 5 (2015) 171–179.
88. Thermal properties of jute fiber concrete at high temperature10.1108/JSFE-09-2016-017 ↗
89. L.M. Mathew Mathews Paul, Mechanical Properties of Pineapple Fibre Reinforced Concrete Subjected to High Temperature, GRD Journals-Global Res. Dev. J. Eng. 2 (2017) 200–205. www.grdjournals.com.
90. M.A. Othuman Mydin, N.M. Zamzani, A.N.A. Ghani, Experimental data on compressive and flexural strengths of coir fibre reinforced foamed concrete at elevated temperatures, Data Br. 25 (2019) 104320. https://doi.org/10.1016/j.dib.2019.104320.10.1016/j.dib.2019.104320 ↗
91. Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material10.1016/j.conbuildmat.2019.02.056 ↗
92. ASTM E119-16a, ASTM E119: Standard Test Methods for Fire Tests of Building Construction and Materials, ASTM Int. West Conshohocken, PA. 552 (2016). https://doi.org/10.1520/E0119-14.10.1520/E0119-14 ↗
93. Effect of nano silica and coir fiber on compressive strength and abrasion resistance of Concrete10.1016/j.conbuildmat.2019.07.232 ↗
94. Mechanical properties of concrete at high temperature-A review10.1016/j.conbuildmat.2015.05.131 ↗
95. F.P. Torgal, S. Jalali, Natural fiber reinforced concrete, Woodhead Publishing Limited, 2011. https://doi.org/10.1016/B978-1-84569-558-3.50005-3.10.1533/9780857095583.2.154 ↗
96. Effects of High Temperature on the Properties of High Performance Concrete (HPC)10.1016/j.proeng.2017.02.108 ↗
97. Effect of Low Temperature on Mechanical Properties of Concrete with Different Strength Grade10.4028/www.scientific.net/KEM.477.308 ↗
98. High temperature and residual properties of reactive powder concrete – A review10.1016/j.conbuildmat.2017.04.083 ↗
99. Thermal behaviour of autoclaved aerated concrete exposed to fire10.1016/j.cemconcomp.2015.04.018 ↗
100. A study on the mechanical properties of self-compacting concrete at high temperature and after cooling10.1617/s11527-012-9839-9 ↗