journal article·2020-11

Technological properties of soil-cement bricks produced with iron ore mining waste

Alan Pereira Vilela, Tony Matheus Carvalho Eugênio, Fernando Fonseca de Oliveira, Juliana Farinassi Mendes, André Geraldo Cornélio Ribeiro, Lívia Elisabeth Vasconcellos de S. Brandão Vaz, Rafael Farinassi Mendes

Publisher page

Abstract

Abstract Soil-cement brick is a composite obtained by mixing soil, cement, and water in previously established proportions. This material is an alternative for urban or rural construction, as it offers several advantages for its use in masonry, such as the addition of waste. For the addition of waste into cement materials the waste from iron ore extraction process has been highlighted Thousands of tons of this waste are generated on a daily basis large mining companies, leading to air pollution and the occupation of large physical spaces. Thus, the aim of this work was to evaluate the effect of replacing different percentages (0, 10, 20, 30, and 40%) of soil by this mining waste on the properties of soil-cement bricks. The raw materials used were: soil (A-4 classification), CPV-ARI cement, and solid mining waste, which were characterized by physicochemical analysis. The mix ratio used for bricks production was 1:9 (cement:soil), where soil was replaced by different waste percentages. Technological properties such as: dry density, water absorption, immersion mass loss, compressive strength, thermal conductivity, and microstructure were determined. The results indicated that the added mining waste positively influenced the density of cement bricks in the soil. In addition, up to 40% of the waste could be incorporated into the brick, considering the current characterisation standards.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Modern earth masonry: structural properties and structural design10.56330/UGAV7711 ↗
2. Inorganic stabilisation methods for extruded earth masonry units10.1016/j.conbuildmat.2014.08.094 ↗
3. Stabilized soils incorporating combinations of rice husk ash and cement kiln dust10.1061/(ASCE)MT.1943-5533.0000310 ↗
4. Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes10.1016/j.conbuildmat.2011.03.042 ↗
5. Reuse of grits waste for the production of soil-cement bricks10.1016/j.jenvman.2013.09.040 ↗
6. Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks10.1016/j.conbuildmat.2018.01.125 ↗
7. Investigation of fibre reinforced mud brick as a building material10.1016/j.conbuildmat.2004.07.013 ↗
8. An experimental investigation on equilibrium moisture content of earth plaster with natural reinforcement fibres for straw bale buildings10.1016/j.applthermaleng.2010.09.009 ↗
9. First exploratory study on dynamic characteristics of rammed earth buildings10.1016/j.engstruct.2011.08.004 ↗
10. Strength, durability and shrinkage characteristics of cement stabilised soil blocks10.1016/0958-9465(95)00019-9 ↗
11. D. Maskell, A. Heath, P. Walker, Appropriate structural unfired earth masonry units Construction Materials, 169 October 2016, p. 261–270. http://dx.doi.org/10.1680/jcoma.15.00034.10.1680/jcoma.15.00034 ↗
12. Morton · 2008
13. Compressive strength of extruded unfired clay masonry units10.1680/coma.2009.162.3.105 ↗
14. Effect of the addition of coal-ash and cassava peels on the engineering properties of compressed earth blocks10.1016/j.conbuildmat.2012.04.056 ↗
15. Thermal study of earth bricks reinforced by date palm fibers10.1016/j.egypro.2015.07.827 ↗
16. Innovative methodology for comprehensive utilization of iron ore tailings Part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material10.1016/j.jhazmat.2009.09.019 ↗
17. Social and economic safety of mining areas: development and determination of management mechanisms in terms of technology and control
18. Systematic processing of iron-ore waste in mining regions10.3103/S0967091217070105 ↗
19. Recycling of concentration tailings of iron ore for the production of concrete block (pavers)10.4028/www.scientific.net/MSF.775-776.631 ↗
20. Application of iron ore mud in powder form in portland cement presence10.1590/S1983-41952012000200003 ↗
21. Mechanical and physical properties of stabilised compressed coal bottom ash blocks with inclusion of lateritic soils in Niger
22. N.C. Balaji, et al. Thermal conductivity studies on cement-stabilised soil blocks. Construction Materials 170 February 2017 Issue CM1. Pages 40–54, http://dx.doi.org/10.1680/jcoma.15.00032.10.1680/jcoma.15.00032 ↗
23. Associação Brasileira De Normas Técnicas. NBR 7181: solo – análise granulométrica. Rio de Janeiro, 13 p. 1984.
24. Associação Brasileira De Normas Técnicas. NBR 5752: materiais pozolânicos – Determinação do índice de desempenho com cimento Portland aos 28 dias. Rio de Janeiro, 4 p. 2014.
25. Associação Brasileira De Normas Técnicas. NBR 10833: Fabricação de tijolo e bloco de solo-cimento com utilização de prensa manual ou hidráulica — Procedimento. Rio de Janeiro, 3 p. 2012.
26. American Society for Testing and Materials. ASTM D4318 · 1998
27. Associação Brasileira de Cimento Portland. Dosagem das misturas de solo-cimento – normas de dosagem. São Paulo: ABCP, Estudo Técnico ET – 35, 1986. 51p.
28. Centro de Pesquisas E Desenvolvimento. Manual de construção com solo-cimento. São Paulo: CEPED, 1984.
29. Associação Brasileira de Normas Técnicas. NBR 7182: solo – Ensaio de compactação. Rio de Janeiro, 10 p. 1986.
30. Associação Brasileira de Normas Técnicas. NBR 12023: Solo-cimento – Ensaio de compactação – Método de ensaio. Rio de Janeiro, 6 p. 1992.
31. Associação Brasileira de Normas Técnicas. NBR 8491: Tijolo de solo-cimento — Requisitos. Rio de Janeiro, 5 p. 2012.
32. Associação Brasileira de Normas Técnicas. NBR 13554: Solo-cimento Ensaio de durabilidade por molhagem e secagem. Rio de Janeiro, 3 p. 1996.
33. Associação Brasileira de Normas TÉCNICAS. NBR 8492: Tijolo de solo-cimento — Análise dimensional, determinação da resistência à compressão e da absorção de água — Método de ensaio. Rio de Janeiro, 4 p. 2012.
34. Métodos de Ensaio Determinação da Perda de Massa Por Imersão De Solos Compactados Com Equipamento Miniatura. Recife, 2003. Vol 12/ ME-61
35. IS, Indian Standard. Specification for soil based blocks used in general building construction. IS 1725, 1982.
36. Physical, mechanical and thermal behavior of adobe stabilized with glass fiber reinforced polymer waste10.1016/j.conbuildmat.2019.06.107 ↗
37. Associação Brasileira de Normas Técnicas. NBR 12653: materiais pozolânicos – Requisitos. Rio de Janeiro, 6 p. 2014.
38. Pozzolanic effect of andesite waste powder on mechanical properties of high strength concrete10.1016/j.conbuildmat.2018.01.043 ↗
39. Tijolos prensados de solo-cimento confeccionados com resíduos de concreto10.1590/S1415-43662008000200014 ↗
40. Use of water reducer to enhance the mechanical and durability properties of cement-treated soil10.1016/j.conbuildmat.2017.10.120 ↗
41. Utilizing spend garnets as sand replacement in alkali-activated mortars containing fly ash and GBFS10.1016/j.conbuildmat.2019.07.149 ↗
42. Motta, Study of the effect of silica fume and latex dosages in cementitious composites reinforced with cellulose fibers
43. Hydration reaction and strength development of calcium sulfoaluminate cement-based mortar cured at cold temperatures10.1016/j.conbuildmat.2019.07.085 ↗
44. Effect of steel slag on the hydration and strength development of calcium sulfoaluminate cement10.1016/j.conbuildmat.2020.120301 ↗
45. Bueno · 1999 · 131
46. Engineering properties evaluation of unfired sludge bricks solidified by cement-fly ash-lime admixed nano-SiO2 under compaction forming Technology10.1016/j.conbuildmat.2020.119879 ↗
47. Is stabilization of earth bricks using low cement or lime contentes relevant?10.1016/j.conbuildmat.2019.117578 ↗
48. The mechanical properties of tailing recycled aggregate concrete and its resistance to the coupled deterioration of sulfate attack and wetting–drying cycles10.1016/j.istruc.2020.07.052 ↗
49. Durability of lime stabilized earth blocks
50. Compressive strength of cement stabilized fly ashsoil mixtures10.1016/S0008-8846(99)00018-6 ↗
51. Compressive strength and microstructural analysis of unfired clay masonry bricks10.1016/j.enggeo.2009.08.010 ↗
52. Cement stabilised rammed earth. Part B: compressive strength and stress–strain characteristics10.1617/s11527-010-9659-8 ↗
53. Characteristic properties of cement-stabilized rammed earth blocks10.1061/(ASCE)MT.1943-5533.0001170 ↗
54. SEM and XRD investigations on lithomargic claystabilized using granulated blast furnace slag and cement
55. The influence of cement type on the performance of advanced concretes designed by computing mix proportion technique
56. Características físicas e mecânicas de misturas de solo, cimento e casca de arroz10.1590/S0100-69162006000100001 ↗
57. Síntese e caracterização das fases minerais C3S, C2S, C3A e C4AF para utilização em cimento tipo Portland10.1590/0366-69132019653732460 ↗
58. Incorporation of bamboo particles and “synthetic termite saliva” in adobes10.1016/j.conbuildmat.2015.06.009 ↗
59. Influence of waste tire rubber fibers on swelling behavior, unconfined compressive strength and ductility of cement stabilized bentonite clay Soil10.1016/j.conbuildmat.2019.03.011 ↗
60. Jute fibers and micro/nanofibrils as reinforcement in extruded fiber-cement composites10.1016/j.conbuildmat.2019.03.236 ↗
61. Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix10.1016/j.cemconcomp.2019.04.025 ↗
62. Thermo physical characteristics of economical building materials10.1016/j.conbuildmat.2004.03.010 ↗
63. Associação Brasileira de Normas Técnicas. NBR 15220: Desempenho térmico de edificações. Parte 2: Métodos de cálculo da transmitância térmica, da capacidade térmica, do atraso térmico e do fator solar de elementos e componentes de edificações. Rio de Janeiro, 21 p. 2003.