Bond strength of FRP bars in recycled-aggregate concrete
Source abstract
Abstract
Abstract This study presents an experimental program conducted to investigate the bond strength of FRP bars in recycled-aggregate concrete compared to the one in normal-aggregate concrete for better evaluation of the results. The experimental program contains thirty six specimens that are tested using the direct pull-out test. In this study, glass, carbon and basalt FRP bars are used with 12 mm diameter and bar bond length of 5d, where d is the bar diameter. The FRP bars are casted in different recycled-aggregate concrete strengths of 30, 45 and 60 MPa. The behaviour of bars in natural-aggregate concrete strength of 30 MPa is used as a benchmark and its behaviour is compared with the ones in recycled-aggregate concrete. The impact of the concrete strengths considered is identified based on the gain in the bond behaviour. The experimental results demonstrate the promise of the recycled aggregates as an alternative to natural aggregates in FRP reinforced concrete. In addition, the use of recycled aggregate enlarges the bearing friction behaviour between the FRP bars and concrete. Analytical models proposed in the literature for the bond behaviour of FRP reinforced concrete are compared with the experimental results obtained here. Organgun et al. equation, and the CMR and the BPE models can accurately predict the bond strength, and bond stress–slip behaviour, respectively, of FRP bars in recycled-aggregate concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. EPA · 2018
2. K. Slowey, Construction debris volume to surge in coming years, Construction Demolition and Recycling, 2018. https://www.cdrecycler.com/article/global-volume-construction-demolition-waste/.
3. T.R. Sonawane, S.S. Pimplikar, “Use of recycled aggregate concrete”, Second International Conference on Emerging Trends in engineering (ICETET-09), 2009 Nagpur, Maharashtra, India.
4. Study on the influence of attached mortar content on the properties of recycled concrete aggregate10.1016/j.conbuildmat.2008.04.012 ↗
5. Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish Structural Concrete Code EHE-0810.1016/j.conbuildmat.2010.07.012 ↗
6. Mechanical properties of concrete produced with recycled coarse aggregates–Influence of the use of superplasticizers10.1016/j.conbuildmat.2013.03.011 ↗
7. Bond behavior between steel reinforcement and recycled concrete10.1617/s11527-013-0063-z ↗
8. Recycled red-clay ceramic construction and demolition waste for mortars production10.1061/(ASCE)0899-1561(2010)22:3(236) ↗
9. Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing10.1016/j.conbuildmat.2012.11.036 ↗
10. Workability study of concretes made with recycled mortar aggregate10.1617/s11527-012-0010-4 ↗
11. Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete10.1016/S0008-8846(03)00186-8 ↗
12. The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement10.1016/j.cemconres.2011.06.004 ↗
13. The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste10.1016/j.cemconcomp.2011.04.002 ↗
14. Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash10.1016/j.cemconcomp.2012.12.011 ↗
15. Mechanical behaviour of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2006.12.004 ↗
16. Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance10.1617/s11527-008-9411-9 ↗
17. Influence of moisture conditioning of recycled aggregates on the properties of fresh and hardened concrete10.1016/j.jclepro.2013.05.009 ↗
18. Evaluation of the bond behavior of steel reinforcing bars in recycled fine aggregate concrete10.1016/j.cemconcomp.2013.10.013 ↗
19. Anchorage of steel bars to recycled aggregate concrete10.1016/j.conbuildmat.2014.08.081 ↗
20. Mallic · 2007
21. Nanni · 2014
22. Influence of recycled coarse aggregates on the bond behavior of deformed bars in concrete10.1016/j.engstruct.2012.10.009 ↗
23. Bond behavior between recycled aggregate concrete and deformed steel bars10.1617/s11527-013-0075-8 ↗
24. Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars10.1016/j.conbuildmat.2015.12.145 ↗
25. Bond behavior between BFRP bars and recycled aggregate concrete reinforced with basalt fiber10.1016/j.conbuildmat.2016.12.161 ↗
26. ACI E1–16, · 2016
27. BS 8500, Complementary British Standard to BS EN206“, Part 1-Methods of specifying and Guidance for the Specifier, London, UK, 2015.
28. PCA, “High-performance concrete”, Design and Control of Concrete Mixtures 16th 2016, Washington USA.
29. ASTM standard D7205/D7205M · 2016
30. ASTM standard D7913/D7913M · 2014
31. Bond Performance of Basalt Fiber-Reinforced Polymer Bars to Concrete10.1061/(ASCE)CC.1943-5614.0000487 ↗
32. Use of basalt fibers for concrete structures10.1016/j.conbuildmat.2015.07.138 ↗
33. Bond durability of basalt-fiber-reinforced (BFRP) bars embedded in concrete in aggressive environments10.1016/j.compositesb.2016.09.039 ↗
34. Experimental testing of basalt-fiber-reinforced polymer bars in concrete beams10.1016/j.compositesb.2016.01.045 ↗
35. Bond Behavior of Fiber Reinforced Polymer Bars under Direct Pullout Conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
36. Bond Behavior of the ETS FRP Bar Shear-Strengthening Method10.1061/(ASCE)CC.1943-5614.0000280 ↗
37. fib (CEB-FIB), “Model Code 10 – fib bulletin No. 65”, Final Draft, International Federation for Structural Concrete, Lausanne, Switzerland, 2010.
38. A reevaluation of test data on development length and splices
39. Development length criteria: bars not confined by transverse reinforcement
40. Behavior and modeling of bond of FRP rebars to concrete10.1061/(ASCE)1090-0268(1997)1:2(40) ↗