Development of high-early-strength fiber-reinforced self-compacting concrete
Source abstract
Abstract
Abstract High-early-strength fiber-reinforced self-compacting concrete (FRSCC) is a practical material for the precast concrete industry to double its production capacity. This study developed high-early-strength FRSCC mixtures that achieved a compressive and flexural strength of at least 24 MPa and 3.5 MPa, respectively, at 6 h, using commercially available components, typical mixing procedures, and air curing. A mix design process was developed based on the literature and experimental results. The effect of six different fiber reinforcements on the fresh and mechanical properties of concrete was analyzed. The cost limit was set at 523 USD/m3 to make the concrete mix cost-effective.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. High-early-strength magnesium phosphate cement with fly ash
2. Early strength gain of rapid highway repairs
3. High early strength engineered cementitious composites for fast durable concrete repair material properties
4. High-early-strength ductile cementitious composites with characteristics of low early-age shrinkage for repair of infrastructures10.1617/s11527-013-0241-z ↗
5. N.R. Sandor Popovics, P. Michael, Rapid hardening cements for repair of concrete, Mater. J. 84(1).
6. High-early-strength engineered cementitious composites
7. High-early-strength-concrete mix proportioning with processed cellulose fibers for durability
8. Evaluation of strength at early ages of self-compacting concrete with high volume fly ash10.1016/j.conbuildmat.2007.04.005 ↗
9. High-early-strength engineered cementitious composites
10. Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete10.1016/j.cemconcomp.2011.08.013 ↗
11. Durable fiber reinforced self-compacting concrete10.1016/j.cemconres.2003.07.005 ↗
12. Self-compacting concrete: an analysis of 11 years of case studies10.1016/j.cemconcomp.2005.10.003 ↗
13. The European guidelines for self-compacting concrete specification
14. Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete10.1016/j.conbuildmat.2011.08.044 ↗
15. Properties of self-compacting concrete containing class F fly ash10.1016/j.matdes.2010.08.043 ↗
16. Rapid hardening cements for repair of concrete
17. P.N. Balaguru, D. Bhatt, Rapid Hardening Concrete, 2000.
18. Early-age properties of cement-based materials. II: influence of water-to-cement ratio10.1061/(ASCE)0899-1561(2009)21:9(512) ↗
19. Blending different fineness cements to engineer the properties of cement-based materials10.1680/macr.2008.62.5.327 ↗
20. Parameter-study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete10.1016/S0008-8846(01)00555-5 ↗
21. Fresh and rheological properties of glass fiber reinforced self-compacting concrete with nanosilica and fly ash blended10.1016/j.conbuildmat.2019.03.087 ↗
22. A review on mixture design methods for self-compacting concrete10.1016/j.conbuildmat.2015.03.079 ↗
23. Y.E. Sugamata, Takumi, M. Ouchi, A mix-design method for self-compacting concrete based on mortar flow and funnel tests, in: PRO 33: 3rd International RILEM Symposium on Self-Compacting Concrete, RILEM Publications, 2003.
24. Rheological model for self-consolidating concrete
25. Carbon reduction of precast concrete under the marine environment10.1016/j.conbuildmat.2014.09.074 ↗
26. Performance evaluation of precast concrete using microwave heating form10.3390/ma12071113 ↗
27. 318, A.C.I.C., Building code requirements for structural concrete: (ACI 318-95); and commentary (ACI 318R-95). 2019, American Concrete Institute.
28. S.H. Kosmatka, M.L. Wilson, Design and Control of Concrete Mixtures, Vol. 16, Portland Cement Association, 2016, pp. 544–546.
29. Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete10.1016/j.buildenv.2006.01.012 ↗
30. Crack growth resistance of hybrid fiber reinforced cement composites10.1016/S0958-9465(01)00043-9 ↗
31. L. Martinie, P. Rossi, N. Roussel, Rheology of Fiber Reinforced Cementitious Materials: Classification and Prediction, Vol. 40, 2010, pp. 226–234.10.1016/j.cemconres.2009.08.032 ↗
32. The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete10.1016/j.conbuildmat.2007.03.034 ↗
33. A new method for the mix design of medium strength flowing concrete with low cement content10.1016/S0958-9465(02)00013-6 ↗
34. A simple mix design method for self-compacting concrete10.1016/S0008-8846(01)00566-X ↗
35. High-early-strength engineered cementitious composites for fast
36. Properties of three newly developed quick cements10.1016/0008-8846(94)90001-9 ↗
37. Rapid setting magnesium phosphate cement for quick repair of concrete pavements — characterisation and durability aspects10.1016/0008-8846(93)90090-V ↗
38. M. Sprinkel, Very-Early-Strength Latex-Modified Concrete Overlay, Virginia Department of Transportation, Richmond, Va, 1998, p. 11.
39. High performance fibre reinforced cementitious composites: six memos for the XXI century societal and economical challenges of civil engineering
40. P. Chaunsali, P. Mondal, Influence of Calcium Sulfoaluminate (CSA) Cement Content on Expansion and Hydration Behavior of Various Ordinary Portland Cement-CSA Blends, 2015.10.1111/jace.13645 ↗
41. 1-Year development trend of concrete compressive strength using calcium sulfoaluminate cement blended with OPC, PFA and GGBS10.1016/j.conbuildmat.2018.11.182 ↗
42. Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends10.1016/j.cemconcomp.2014.11.005 ↗
43. M.A.G. Aranda, A.G. De la Torre, 18 - Sulfoaluminate cement, in: F. Pacheco-Torgal, et al. (Eds.), Eco-Efficient Concrete, Woodhead Publishing, 2013, pp. 488–522.10.1533/9780857098993.4.488 ↗
44. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
45. Hydration products in sulfoaluminate cements: Evaluation of amorphous phases by XRD/solid-state NMR10.1016/j.cemconres.2016.05.014 ↗
46. New applications of calcium sulfoaluminate cement10.1016/j.cemconres.2003.10.019 ↗
47. Slag waste incorporation in high early strength concrete as cement replacement: environmental impact and influence on hydration & durability attributes10.1016/j.jclepro.2017.11.105 ↗
48. A.C.I. Committee Self-Consolidating Concrete. Technical Documents. 237R–07:
49. A method for mix-design of fiber-reinforced self-compacting concrete10.1016/j.cemconres.2007.03.014 ↗
50. Mechanical and durability evaluation of fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2016.05.127 ↗
51. Self-compacting concrete: theoretical and experimental study10.1016/j.cemconres.2005.06.002 ↗
52. M.Z. Bayasi, S. Parviz, Effect of Steel Fiber Reinforcement on Fresh Mix Properties of Concrete, ACI Mater. J. 89(4).
53. Rheological properties and the air content in fresh concrete for self compacting high performance concrete10.1016/j.conbuildmat.2015.07.051 ↗
54. Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)10.1016/j.conbuildmat.2015.08.112 ↗
55. Flexural behavior of self-compacting concrete reinforced with different types of steel fibers10.1016/j.conbuildmat.2013.05.072 ↗
56. Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice10.1016/j.conbuildmat.2010.11.058 ↗
57. Influence of hybrid fibers on the fresh and hardened properties of structural light weight self-compacting concrete10.1088/1757-899X/518/2/022022 ↗
58. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
59. P. Sandor, Analysis of concrete strength versus water-cement ratio relationship, ACI Mater. J. 87(5).