journal article·2015-09

Experimental study on segregation resistance of nanoSiO2 fly ash lightweight aggregate concrete

Yingli Gao, Chao Zou

Publisher page

Abstract

Abstract Lightweight aggregate concretes (LWACs) of strength grade raging from LC40 to LC50 were prepared by adding different proportions of fly ash and nanoSiO2. Segregation resistance of LWAC was studied by slump and segregation degree tests. The results indicate that adding of finer fly ash enhances the fluidity of LWAC and enlarges the slump, meanwhile, with the increase of fly ash content, segregation degree of concrete is decreased and floating of lightweight aggregate is somewhat alleviative but still exists; adding of nanoSiO2 improves the segregation resistance of LWAC to a certain extent, but deteriorates the fluidity of concrete mixture; combined admixture of nanoSiO2 and fly ash not only increases the slump of LWAC, but also improves its segregation resistance, prevents the floating of lightweight aggregate and makes concrete show better homogeneity. Mechanical property tests indicate that combined admixture of nanoSiO2 and fly ash improves the compressive strength, increases the tension–compression ratio and reduces the brittleness of concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA)10.1016/j.cemconcomp.2006.09.004 ↗
2. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete10.1016/j.conbuildmat.2012.02.053 ↗
3. Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air10.1016/j.conbuildmat.2011.08.067 ↗
4. Durability of lightweight concretes with lightweight fly ash aggregates10.1016/j.conbuildmat.2010.09.022 ↗
5. Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2009.02.038 ↗
6. Image processing applied to the analysis of segregation in lightweight aggregate concretes10.1016/j.conbuildmat.2011.03.028 ↗
7. Effects of different mineral admixtures on carbonation resistance of lightweight aggregate concrete10.1016/j.conbuildmat.2013.02.038 ↗
8. Experimental study on the anti-segregation performance of pumping high strength lightweight aggregate concrete
9. An experimental study on the workability of self-compacting lightweight concrete10.1016/j.conbuildmat.2008.08.023 ↗
10. Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability10.1016/j.cemconres.2004.07.035 ↗
11. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
12. Experimental investigation of the size effects of SiO2 nano-particles on the mechanical properties of binary blended concrete
13. Performance of nano-silica modified high strength concrete at elevated temperatures10.1016/j.conbuildmat.2014.06.026 ↗
14. Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount10.1016/j.conbuildmat.2014.04.063 ↗
15. The effects of nano-silica and nano-alumina on frost resistance of normal concrete10.1016/j.conbuildmat.2013.07.088 ↗
16. Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles10.1016/j.conbuildmat.2014.07.099 ↗
17. Wei · 2013