Effect of fineness and dosage of aluminium powder on the properties of moist-cured aerated concrete
Source abstract
Abstract
Abstract The influence of fineness of aluminium powder through an evaluation of variation in the workability of the mix, rate of aeration and fresh density with time, dry density, compressive strength and water absorption of aerated cement paste and mortar were studied. Flow table test clearly distinguishes variation in initial workability of the mixes for the variations in water–cement ratio, whereas the Marsh cone test is suitable for reflecting the reduction in workability of the mix with time caused by aeration. The dosage of aluminium powder required to achieve a desired density reduces with an increase in its fineness. Inconsistent with the dosage of aluminium powder required, for a given dry density or compressive strength of aerated cement paste or mortar, the water absorption increases with fineness of aluminium powder. For a given fineness of aluminium powder, appropriate dosage and water–cement ratio required has to be identified based on the desired density and strength, or strength to density ratio.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
2. Influence of air-cooled slag on physicochemical properties of autoclaved aerated concrete10.1016/j.cemconres.2004.10.011 ↗
3. Influence of zeolite additive on properties of autoclaved aerated concrete10.1016/j.buildenv.2006.08.003 ↗
4. Microstructure and properties of silty siliceous crushed stone-lime aerated concrete10.1007/BF02840830 ↗
5. Properties of the autoclaved aerated concrete produced from coal bottom ash10.1016/j.jmatprotec.2008.02.044 ↗
6. Effect of high temperature and cooling conditions on aerated concrete properties10.1016/j.conbuildmat.2008.08.007 ↗
7. Effect of mixing constituent toward engineering properties of POFA cement-based aerated concrete10.1061/(ASCE)0899-1561(2010)22:4(287) ↗
8. Utilization of natural zeolite in aerated concrete production10.1016/j.cemconcomp.2009.10.002 ↗
9. Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concrete10.1016/j.cemconcomp.2014.11.006 ↗
10. Hygric, thermal and durability properties of autoclaved aerated concrete10.1016/j.conbuildmat.2012.12.036 ↗
11. Improving the energy efficiency in buildings while reducing the waste using autoclaved aerated concrete made from power industry waste10.1016/j.enbuild.2012.10.029 ↗
12. Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag10.1016/j.conbuildmat.2011.08.034 ↗
13. Physical and mechanical characterization of Fiber-Reinforced Aerated Concrete (FRAC)10.1016/j.cemconcomp.2013.03.006 ↗
14. Utilization of phosphogypsum for the preparation of non-autoclaved aerated concrete10.1016/j.conbuildmat.2013.03.070 ↗
15. Influence of quartz particle size on the chemical and mechanical properties of autoclaved aerated concrete (II) fracture toughness, strength and microstructure10.1016/0008-8846(95)00004-6 ↗
16. Experimental study of the mechanical anisotropy of aerated concretes and of the adjustment parameters of the introduced porosity10.1016/j.conbuildmat.2005.01.023 ↗
17. IS 1489-part1 · 1993
18. Use of gasification residues in aerated autoclaved concrete10.1016/j.cemconres.2004.05.005 ↗
19. ASTM E122-09 · 2012
20. ASTM C109 · 2010
21. IS 4031 part-6 · 2003
22. Autoclaved aerated concrete from slate waste Part 1: some property/density relationships10.1016/0262-5075(80)90028-7 ↗