Moisture characterization of cementitious material properties: Assessment of water vapor sorption isotherm and permeability variation with ages
Source abstract
Abstract
Abstract The water vapor adsorption desorption isotherm and the water vapor permeability of cementitious materials were experimentally evaluated in this study according to the evolving nature of the microstructure of this type of material due to their hardening over time (7 days and 28 days). For getting a constant microstructure during measurements, it was necessary to stop hydration. The cement arresting hydration technique was chosen based on a comparative study on various methods known in literature. Results show that the suitable method is immersion under air vacuum in acetone bath for 7 days, followed by drying in an air vacuum for 3 days (without acetone). Using adsorption and desorption isotherms allowed identifying the moisture storage capacity. This parameter varies according to the relative humidity and material age. Moreover, the range where the relative humidity values are important (saturation zone RH > 90%) was investigated by means of retention water measurements using the membrane extraction method. The results obtained show an important gap of water content from 90% of RH to saturation step. Consequently, the water vapor permeability tests highlight the evolution of this coefficient according to material age and its formulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials10.1016/j.buildenv.2010.12.020 ↗
2. Experimental and theoretical investigation of non-isothermal transfer in hygroscopic building materials10.1016/j.buildenv.2007.12.014 ↗
3. Luikov · 1966
4. An analytical method to calculate the coupled heat and moisture transfer in building materials10.1016/j.icheatmasstransfer.2005.08.001 ↗
5. Development of an analytical method for simultaneous heat and moisture transfer in building materials utilizing transfer function method10.1061/(ASCE)0899-1561(2005)17:5(492) ↗
6. Simultaneous heat and moisture transport in porous building materials: evaluation of nonisothermal moisture transport properties10.1007/s10853-008-2584-3 ↗
7. The influence of water removal techniques on the composition and microstructure of hardened cement pastes10.1016/j.cemconres.2008.02.012 ↗
8. The effect of different drying techniques on the pore size distribution of blended cement mortars10.1016/0008-8846(93)90183-A ↗
9. Pretreatment of hardened hydrated cement pastes for mercury intrusion measurements10.1016/0008-8846(91)90011-6 ↗
10. Critical examination of drying damage to cement pastes10.1680/adcr.2000.12.2.79 ↗
11. Effect of drying on cement based materials pore structure as identified by mercury intrusion porosimetry: a comparative study between oven-, vacuum- and freeze-drying10.1016/S0008-8846(01)00594-4 ↗
12. Künzel HM. One and two-dimensional calculation of the simultaneous heat and moisture transport in building components, using simple parameters [PhD thesis]. Frauenhofer Institute for Building Physics; 1995.
13. Pedersen CR. Combined Heat and Moisture Transfer in Building Constructions [PhD thesis] (Report no. 214), Thermal Insulation Laboratory, Technical University of Denmark; 1990.
14. Tong L. Moisture Transport in Wood and Wood-based Panels [PhD thesis]. Department of Building Materials, Royal institute of Technology in Stockholm, Sweden; 1988.
15. Effect of drying methods on microstructural changes in hardened cement paste: an A.C. impedance spectroscopy evaluation10.3151/jact.2.113 ↗
16. Baroghel-Bouny V. Caractérisation des pâtes de ciment et des bétons: méthodes, analyse, interprétations. Laboratoire Central des Ponts et Chaussées, Paris; 1994.
17. Relationship between the transfer properties of the coating and impedance spectroscopy in reinforced cement-based materials10.1007/s10853-006-0493-x ↗
18. Influence of the age and drying process on pore structure and sorption isotherms of hardened cement paste10.1016/j.cemconres.2006.06.010 ↗
19. Wittmann FH. Drying and Shrinkage of Hardened Cement Paste, Pore Solution in Hardened Cement Paste Aedificatio Publishers, Freiburg; 2000.
20. Trechsel HR. Moisture Analysis and Condensation Control in Building Envelopes ASTM International; 2001.10.1520/MNL40-EB ↗
21. An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part I: Experimental facility and material property data10.1016/j.ijheatmasstransfer.2007.03.026 ↗
22. Moisture permeability data presented as a mathematical relationship10.1080/096132198369931 ↗
23. Janz M. Moisture transport and fixation in porous materials at high moisture levels [PhD thesis]. Lund University, Sweden; 2000.
24. Mounanga P. Etude expérimentale du comportement de pâtes de ciment au très jeune âge: hydratation, retraits, propriétés thermophysiques [PhD thesis]. Nantes University; 2003.
25. Bogue RH. La chimie du ciment de Portland Eyrolles Ed., 586 p, Paris; 1952.
26. Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure10.1016/j.cemconres.2009.01.014 ↗
27. Long-term study of cement performance in concrete: chapter 3. Chemical and physical tests of the cements
28. Structural properties of calcium silicate pastes: II, effect of the curing temperature10.1111/j.1151-2916.1979.tb19079.x ↗
29. Reactions of tricalcium silicate paste with organic liquids10.1016/0008-8846(87)90134-7 ↗
30. New model to calculate water permeability of cement-based materials from MIP results10.1680/adcr.2002.14.2.43 ↗
31. Effects of water–cement ratio and curing time on the critical pore width of hardened cement paste10.1016/j.conbuildmat.2008.08.011 ↗
32. Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars10.1016/j.cemconres.2011.11.019 ↗
33. Sing KS. Reporting Physisorption data for gas/solid systems Pure and Applied Chemistry, vol. 57 de Fundamentals of Adsorption, Proceedings of the Engineering Foundation Conference, pp. 603–619, Bavaria, West Ger, 1985, Engineering Foundation 16, 72.10.1351/pac198557040603 ↗
34. Determination of the moisture capacity of porous building materials10.1106/109719602022835 ↗
35. The general mechanism of water sorption on foodstuffs – importance of the multitemperature fitting of data and the hierarchy of models10.1016/j.jfoodeng.2007.03.012 ↗
36. Applicability of the generalized d’Arcy and Watt model to description of water sorption on pineapple and other foodstuffs10.1016/j.jfoodeng.2006.02.036 ↗
37. Accelerated carbonation of concrete with high content of mineral additions: effect of interactions between hydration and drying10.1016/j.cemconres.2012.10.008 ↗
38. European Standard ISO 12572 Building materials – determination of water vapor transmission properties (ISO/DIS 12572:1997) PrEN ISO 12572. March 1997.
39. Modeling the coupled evolution of hydration and porosity of cement-based materials10.1016/j.conbuildmat.2004.12.004 ↗