Investigating the effects of micro-defects on the dynamic properties of rock using Numerical Manifold method
Source abstract
Abstract
Abstract In this study, the Numerical Manifold method (NMM) is extended to investigate the effects of micro-defects on the dynamic mechanical properties of rock under different strain rates. The displacement decomposition technique is incorporated in the NMM to estimate the mixed mode stress intensity factors at the crack tip. A dynamic crack growth criterion is also incorporated in the NMM for crack growth analysis. The developed NMM is first validated by a simple sliding crack model. The developed model is then applied to investigate the effects of the micro-cracking properties such as initial micro-crack length, initial micro-crack inclination angle and initial micro-crack separation distance on the dynamic mechanical properties of a granite under different strain rates ranging from 10 −4 /s to 10 0 /s. The effect of confining stress on the granite dynamic strength is also investigated. Simulation results illustrated that the initial micro-crack length and the confining stress have a significant effect on the dynamic strength. The effect of micro-crack separation distance, on the other hand, is heavily dependent on the ratio of separation distance to the initial micro-crack length.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Numerical methods in engineering · Dam Engineering and Safety
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Microcracks in rocks-new petrographic tool
2. Experimental studies in wave propagation across a jointed rock mass10.1007/s10064-011-0392-5 ↗
3. Experimental study of stress wave propagation across a filled rock joint10.1016/j.ijrmms.2008.11.006 ↗
4. Study on generation of rock fracture surfaces by using fractal interpolation10.1016/S0020-7683(00)00390-5 ↗
5. Study on stress wave propagation in fractured rocks with fractal joint surfaces10.1016/j.ijsolstr.2006.11.015 ↗
6. Brittle failure in compression-splitting, faulting and brittle-ductile transition
7. Compression induced micro crack growth in brittle solids: axial splitting and shear failure10.1029/JB090iB04p03105 ↗
8. Geometric probability approach to the characterisation and analysis of microcracking in rocks-discussion10.1016/0167-6636(85)90024-9 ↗
9. Geometric probability approach to the characterisation and analysis of microcracking in rocks10.1016/0167-6636(85)90023-7 ↗
10. Micromechanics of pressured-induced grain crushing in porous rocks10.1029/JB095iB01p00341 ↗
11. A note on the propagation behaviour of a crack nucleated by a dislocation pile-up10.1029/JB095iB06p08639 ↗
12. Strain-rate effect on brittle failure in compression10.1016/0956-7151(94)90295-X ↗
13. Dynamic damage evolution in brittle solids10.1016/0167-6636(92)90008-2 ↗
14. The failure of brittle solids containing small cracks under compressive stress state10.1016/0001-6160(86)90086-6 ↗
15. Crack extension under compressive loads10.1016/0013-7944(84)90051-1 ↗
16. Modelling dilation and failure of uniaxial compressed brittle materials by micro-weakened solids10.1016/0013-7944(93)90231-G ↗
17. A micromechanical model for high strain rate behaviour of ceramic10.1016/0020-7683(94)00286-6 ↗
18. Micromechanics of brittle creep in rocks
19. A model for nonlinear rock deformation under compression due to sub-critical crack growth10.1016/0148-9062(91)91121-7 ↗
20. A microcrack model of dilatancy in brittle materials10.1115/1.3173647 ↗
21. Micromechanical modelling of the mechanical properties of a granite under dynamic uniaxial compressive loads10.1016/S1365-1609(00)00025-3 ↗
22. Effect of loading rate on fracture toughness and failure micromechanisms in marble10.1016/j.engfracmech.2013.02.009 ↗
23. Thin-layer element for interfaces and joints10.1002/nag.1610080103 ↗
24. Finite-difference modeling of faults and fractures10.1190/1.1443884 ↗
25. Practical equivalent continuum characterization of jointed rock masses10.1016/S1365-1609(01)00010-7 ↗
26. Stability analysis of jointed rock slopes using the Barton–Bandis constitutive model in UDEC10.1016/j.ijrmms.2003.12.142 ↗
27. Extensions of discontinuous deformation analysis for jointed rock masses10.1016/0148-9062(96)00016-2 ↗
28. Modelling rock blasting considering explosion gas penetration using discontinuous deformation analysis10.1007/s00603-010-0132-3 ↗
29. Modeling fracturing in rock blasting10.1016/S1365-1609(97)80068-8 ↗
30. A bonded-particle model for rock10.1016/j.ijrmms.2004.09.011 ↗
31. A 3D distinct lattice spring model for elasticity and dynamic failure10.1002/nag.930 ↗
32. Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach
33. Crack initiation, propagation and coalescence in rock-like material containing two flaws: a numerical study based on bonded-particle model approach10.1007/s00603-012-0323-1 ↗
34. A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering10.1016/S1365-1609(03)00013-3 ↗
35. Microcrack interaction brittle rock subjected to uniaxial tensile loads10.1016/j.tafmec.2006.10.004 ↗
36. Constitutive relationship of brittle rock subjected to dynamic uniaxial tensile loads with microcrack interaction effects10.1016/j.tafmec.2009.09.002 ↗
37. Microcrack statistics, Weibull distribution and micromechanical modeling of compressive failure in rock10.1016/j.mechmat.2005.12.002 ↗
38. Modeling microcrack kinetics in rocks10.1002/nag.1610070104 ↗
39. Microcrack-based coupled damage and flow modeling of fracturing evolution in permeable brittle rocks10.1016/j.compgeo.2012.11.009 ↗
40. Finite-element study on the closure of thermal microcracks in feldspar quarts-rocks. 1. grain boundary cracks10.1111/j.1365-246X.1993.tb02525.x ↗
41. Finite-element study on the closure of thermal microcracks in feldspar quarts-rocks. 2. intragranular, transgranular and mixed cracks10.1111/j.1365-246X.1993.tb02526.x ↗
42. Shi GH. Manifold method of material analysis. In: Trans 9th army conf on applied mathematics and computing. Minneapolis, Minnesota; 1991. p. 57–76.
43. Shi GH. Modeling rock joints and blocks by manifold method. In: Proceedings of the 33th US rock mechanics symposium. New Mexico, SanTa Fe; 1992. p. 639–48.
44. Crack growth prediction by manifold method10.1061/(ASCE)0733-9399(1999)125:8(884) ↗
45. Mixed mode fracture propagation by manifold method10.1023/A:1015713428989 ↗
46. Enriched meshless manifold method for two-dimensional crack modeling10.1016/j.tafmec.2005.09.002 ↗
47. Modeling complex crack problems using the numerical manifold method10.1007/s10704-009-9342-7 ↗
48. Frictional crack initiation and propagation analysis using the numerical manifold method10.1016/j.compgeo.2011.08.011 ↗
49. Elastic-plastic cracking analysis for brittle-ductile rocks using manifold method10.1007/s10704-012-9802-3 ↗
50. Modeling inclusion problems in viscoelastic materials with the extended finite element method10.1016/j.finel.2009.06.006 ↗
51. Modeling cracking behavior of rock mass containing inclusions using the enriched numerical manifold method10.1016/j.enggeo.2013.05.001 ↗
52. Fracture modeling of isotropic functionally graded materials by the numerical manifold method10.1016/j.enganabound.2013.10.006 ↗
53. New strategies for some issues of numerical manifold method in simulation of crack propagation10.1002/nme.4620 ↗
54. Simulation of topping failure of rock slope by numerical manifold method10.1142/S0219876210002118 ↗
55. Footwall slope stability analysis with the numerical manifold method10.1016/j.ijrmms.2011.06.011 ↗
56. Application of the numerical manifold method to model progressive failure in rock slopes10.1016/j.engfracmech.2014.02.022 ↗
57. Development of three-dimensional numerical manifold method for jointed rock slope stability analysis10.1016/j.ijrmms.2013.08.015 ↗
58. Investigation on strength and stability of jointed rock mass using three-dimensional numerical manifold method10.1002/nag.2147 ↗
59. The partition of unity method10.1002/(SICI)1097-0207(19970228)40:4<727::AID-NME86>3.0.CO;2-N ↗
60. The numerical manifold method a review10.1142/S0219876210002040 ↗
61. Application of the numerical manifold method for stress wave propagation across rock masses
62. Extension of numerical manifold method for coupled fluid flow and fracturing problems10.1002/nag.2293 ↗
63. Elastic crack growth in finite elements with minimal remeshing10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S ↗
64. A mesh-based partition of unity method for discontinuity modeling10.1016/S0045-7825(02)00655-2 ↗
65. A method of computation for structural dynamics
66. Numerical analysis of 2-D crack propagation problems using the numerical manifold method10.1016/j.enganabound.2009.07.006 ↗
67. A path independent integral and the approximate analysis of strain concentration by nothes and cracks10.1115/1.3601206 ↗
68. Energy-based automatic mixed-mode crack propagation modeling10.1061/(ASCE)0733-9399(1995)121:8(914) ↗
69. Zhao J, Li HB, Zhao YH. Dynamic strength tests of the Bukit Timah granite. Technical report. Singapore: Nanyang Technological University; 1998.
70. Observation of brittle-deformation features at maximum stress of westerly granite and solenhofen limestone10.1016/0148-9062(70)90043-4 ↗
71. Li HB, Li TJ, Zhao J, Gao JG, Jiang JG. Study on strength of rock material under dynamic triaxial compressive loads based on sliding crack model. In: Hwang W, Han KS, editors. Fracture and strength of solids, Pts 1 and 2, 2000. p. 67–72.10.4028/www.scientific.net/KEM.183-187.67 ↗
72. Dynamic uniaxial compression tests on a granite10.1016/S0148-9062(99)00008-X ↗
73. A note on brittle crack growth in compression10.1029/JZ068i012p03709 ↗
74. Analysis of a microcrack model and constitutive equations for time-dependent dilatancy of rocks10.1046/j.1365-246X.2003.02067.x ↗