The structural behavior and design methodology for a new building system consisting of glass fiber reinforced gypsum panels
Source abstract
Abstract
Abstract Glass fiber reinforced gypsum (GFRG) walls are prefabricated large gypsum panels with hollow cores. Developed in Australia in the early 1990s and subsequently adopted by other countries, including China and India, this material is used in residential, commercial, and industrial buildings. GFRG walls are used both architecturally and structurally as walls and slabs, with no columns and beams required. They have already found wide application, even without mature structural design codes, largely because of their environmental friendliness. In India, GFRG walls have been approved by the World Bank as being eligible for Carbon Credits under the Kyoto Protocol. GFRG panels are a composite material consisting of gypsum plaster and glass fibers. When the cavities are filled with reinforced concrete, the interaction between the concrete and the GFRG panels produces another composite. As a result, the structural behavior of GFRG walls and the associated building system are more complicated than that of conventional structural systems. This paper presents the results of extensive experimental and theoretical investigations into the structural behavior of GFRG walls, and offers a structural design methodology for GFRG walls and the associated building system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Omahen R. Ecologically sustainable development: approaches in the construction industry. Master of economics thesis, Faculty of Economics, University of Regensburg: Regensburg, Germany; 2002.
2. Wu YF. A 2002 report into the physical testing and the development of design guidelines for the structural application of Rapidwall in building construction. Adelaide (Australia): Dare Sutton Clarke Engineers; 2002.
3. Axial and shear behavior of glass fiber reinforced gypsum wall panels: tests10.1061/(ASCE)1090-0268(2004)8:6(569) ↗
4. The effect of longitudinal reinforcement on the cyclic shear behavior of glass fiber reinforced gypsum wall panels: tests10.1016/j.engstruct.2004.06.009 ↗
5. Flexural and shear strength of composite lintels in glass fiber reinforced gypsum wall constructions10.1061/(ASCE)0899-1561(2006)18:3(415) ↗
6. Shear strength of concrete filled glass fiber reinforced gypsum walls10.1617/s11527-007-9271-8 ↗
7. Development of the structural design theory for Rapidwall building system
8. Janardhana M, Prasad AM, Menon D. Studies on the behavior of glass fiber reinforced gypsum wall panels. In: Proceedings of the 8th US national conference on earthquake engineering, San Francisco, California, USA; 18–22 April 2006. Paper no. 1326.
9. Janardhana M, Prasad AM, Menon D. Behavior of glass fiber reinforced gypsum wall panel under cyclic lateral loading. In: Proceedings of the fourth international structural engineering and construction conference (ISEC-4), Melbourne, Australia; 26–28 September 2007. p. 707–11.
10. CSIR. Evaluation of seismic performance of gypcrete building panels. Structural Engineering Research Centre, Chennai, India; August 2002. Project no. CNP 053241/2.
11. Experimental study on different intervals concrete filled fiber plasterboard
12. Research on seismic properties of the structure for reinforced plasterboard filled with concrete
13. Testing studies on restoring force of fiber-reinforced plasterboard with core column
14. Jiang X, Gou Y. Cyclic behavior of fiber-reinforced plasterboard with core concrete composite shear walls. In: Proceedings of the ninth Canadian conference on earthquake engineering, Ottawa, Ontario, Canada; June 2007. p. 1234–42.
15. Experimental study on seismic behavior of reinforced rapid-wall
16. Experimental study on compressive strength of the Rapidwall
17. Zhao K, Zhang X, Wei TJ. Full-scale model test on the performance of a five-storey fiber plaster board building. In: Proceedings of the seventh international RILEM symposium fiber reinforced concrete: design and applications (BEFIB-2008 symposium), Chennai, India; 17–19 September 2008.
18. Booth · 1994
19. Paulay · 1992
20. JD14-010-2007. Technological specification of compound wall structural system with big fiber hollow plaster panel. PR China: Shang Dong Construction Bureau; 5th September 2007.
21. Seismic shear strength of reinforced concrete columns10.1061/(ASCE)0733-9445(1994)120:8(2310) ↗
22. ATC. Structural response modification factors. ATC-19. Redwood, (CA): Applied Technology Council; 1995.