Numerical modelling of high speed train/track system for the reduction of vibration levels and maintenance needs of railway tracks
Source abstract
Abstract
Abstract It has been proven that cyclic loading induced by the circulation of trains at very high speeds (>300 km/h) results in important track vibrations progressively amplified in a repeated process leading to the deterioration of track geometric quality and an unwanted increase in track maintenance needs and track life cycle costs. Having this as concern, the present paper focuses on a numerical model which was built to correctly predict train/track dynamic response (confidence assured by an extensive validation process with real experimental measurements in railway high speed lines) not only instantaneously but also in a long-term perspective. The innovation consists on the fact that the same tool enables both accessing track vibration levels and evaluating track settlement evolution throughout millions of cyclic train passages, maintaining low computing time. Different track design solutions are simulated, such as: softening railpads, applying under sleeper pads, placing ballast mats or using bituminous subballast as an alternative to granular subballast. Results are evaluated in the perspective of track vibrations mitigation and track maintenance needs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Railway Engineering and Dynamics · Civil and Geotechnical Engineering Research · Railway Systems and Energy Efficiency
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Ferreira PA. Modelling and prediction of the dynamic behavior of railway infrastructures at very high speeds [Ph.D. thesis]. Lisbon: IST-UTL; 2010. p. 345.
2. Gleisgeometrie und konstruktion des oberbaues von schnellfahrstrecken/track geometry and construction of the superstructure of high-speed lines
3. Prud’Homme. “La voie”, Revue Générale des Chemins de Fer, vol. 1; 1970. p. 56–72.
4. Numerical modelling of ground borne vibrations from high speed rail lines on embankments10.1016/j.soildyn.2012.12.003 ↗
5. Discrete modelling of vertical track-soil coupling for vehicle-track dynamics10.1016/j.soildyn.2011.07.007 ↗
6. New possibilities to reduce track costs on high-speed lines using a bituminous sub-ballast layer10.1080/10298431003749733 ↗
7. Rail track performance with different subballast solutions: traffic and environmental effects on subgrade service life10.1061/(ASCE)TE.1943-5436.0000470 ↗
8. Teixeira PF, Ferreira PA, Ferreira TM, Caetano L. BituRail – Optimization of high-speed railway track using bituminous sub-ballast. D4 – Project Final Report, PTDC/ECM/70571/2006; 2008–2011.
9. The dynamic response of rail support10.1080/00423114.2013.778415 ↗
10. Dynamic aspects of rail tracks for high-speed railways10.1080/10298436.2010.482991 ↗
11. Influence of the fastening modeling on the vehicle-track interaction at singular rail surface defects
12. Vibrations of structural systems by component mode synthesis
13. Balmès E. Use of generalized interface degrees of freedom in component mode synthesis. In: XIV IMAC – International Modal Analysis Conference, Dearborn; 1996.
14. N. Guérin. Approche Expérimentale et Numérique du Comportement du Ballast des Voies de Chemins de Fer [Ph.D. thesis]. Paris: Ecole Nationale des Ponts et Chaussées; 1996.
15. Bodin V. Comportement du ballast des voies ferrées soumises à un chargement vertical et latéral [Ph.D. thesis]. Paris: Ecole Nationale des Ponts et Chaussées; 2001.
16. Melis M. Apuntes de introducción a la Dinámica vertical de la vía y a las Señales digitales en ferrocarriles. Madrid: Universidad Politecnica de Madrid – Cátedra de Ferrocarriles; 2008. p. 797.
17. A study of the effect of global track stiffness and its variations on track performance: simulation and measurement10.1243/09544097JRRT361 ↗