A simple fatigue performance model of asphalt mixtures based on fracture energy
Source abstract
Abstract
Abstract A simple fatigue prediction model of asphalt mixtures based on fracture energy was proposed in this study. The fracture energy density obtained from indirect tension (IDT) test was employed in the fatigue model to consider the resisting energy of the asphalt mixtures against fracture damage. Four point bending beam fatigue tests were performed at various strain levels to characterize the fatigue performance of the two different asphalt mixtures with varying binder contents. Using the fatigue tests data, various types of fatigue models were evaluated. Traditional strain or dissipated energy based fatigue models are simple but strongly dependent on the material types and unable to identify fatigue performance for various asphalt mixtures. A fatigue model based on the ratio of dissipated energy change is independent of the material types and shows relatively high levels of prediction accuracy. However, this fatigue model needs cyclic fatigue tests to characterize the model coefficients. Unlike the fatigue models mentioned above, the newly proposed fatigue model is independent of binder types, binder contents, strain levels and volumetric properties. The proposed fatigue model is able to reasonably predict the fatigue lives of various asphalt mixtures without changing the model coefficients. Moreover, the material properties used in the model can be obtained from the simple IDT test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Application of generalized J integral to crack propagation modeling of asphalt concrete under repeated loading10.3141/2127-09 ↗
2. Fatigue behavior of SMA and HMA mixtures10.1016/j.conbuildmat.2009.12.025 ↗
3. Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements10.1016/j.conbuildmat.2008.01.001 ↗
4. A dissipated energy approach to fatigue evaluation10.1080/14680629.2006.9690026 ↗
5. Energy-derived, damage-based failure criterion for fatigue testing10.3141/1723-18 ↗
6. Fatigue damage analysis in asphalt concrete mixtures using the dissipated energy approach10.1139/l06-032 ↗
7. Fatigue evaluation of asphalt mixtures using dissipated energy and viscoelastic continuum damage approaches
8. Viscoelastic constitutive model for asphalt concrete under cyclic loading10.1061/(ASCE)0733-9399(1998)124:1(32) ↗
9. Fracture energy from indirect tension testing
10. Identification and verification of a suitable crack growth law
11. Hot mix asphalt fracture mechanics: a fundamental crack growth law for asphalt mixtures
12. Determination of fundamental tensile failure limits of mixtures
13. AASHTO T321-07. Determining the fatigue life of compacted hot mix asphalt (HMA) subjected to repeated flexural bending. Standard specifications for transportation materials and methods of sampling and testing 28th edition. Washington, DC: American Association of State Highway and Transportation Officials; 2008.
14. Fatigue characterization of asphalt concrete using viscoelasticity and continuum damage theory
15. AASHTO T322-03. Standard test method for determining the creep compliance and strength of hot mix asphalt (HMA) using the indirect tensile test device. Standard specifications for transportation materials and methods of sampling and testing, 24th Edition. Washington, DC: American Association of State Highway and Transportation Officials; 2004.
16. AASHTO TP62-03. Determining dynamic modulus of hot mix asphalt concrete mixtures. 2005 AASHTO provisional standards 8th edition. Washington, DC: American Association of State Highway and Transportation Officials; 2005.
17. Lee HJ. Uniaxial constitutive modeling of asphalt concrete using viscoelasticity and continuum damage theory. Ph.d. dissertation. Raleigh: North Carolina State University; 1996.
18. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives10.1016/j.conbuildmat.2009.06.036 ↗
19. Comparing resilient modulus and dynamic modulus of hot-mix asphalt as material properties for flexible pavement design10.1177/0361198106197000117 ↗
20. Improved asphalt mix design