journal article·2014-03

Influence of magnesium hydroxide content and fineness on the carbonation of calcium hydroxide

Jun Chang, Yong Li, Mingli Cao, Yanfeng Fang

Publisher page

Abstract

Abstract Accelerated carbonation material is a kind of air hardening cementitious materials. The influence of magnesium content on the properties of carbonate binder, such as compressive strength, CO 2 mass gain degree and products morphology, were investigated. Solid state carbonation method that low water to solid ratio (W/S) of 0.10 was performed in this study. The samples were prepared at a range of compaction pressures (0 MPa–8.0 MPa). And then the samples were exposed at a constant CO 2 gas pressure (0.2 MPa) for different carbonation time. The result showed that different calcium to magnesium mole (C/M) ratios has a significant impact on compressive strength and CO 2 mass gain degree of samples. The CO 2 mass gain degree increased at first, reached the maximum, and then decreased with the increasing C/M ratio. The C/M ratio of that CO 2 mass gain degree reached the maximum was 5. The compressive strength not only changed by magnesium content but also influenced by the fineness of magnesium hydroxide, more finer practical size more higher compressive strength. SEM photographs showed that the morphology of carbonated products changed by different compaction pressures and content of magnesium hydroxide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: CO2 Sequestration and Geologic Interactions · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A case study and mechanism investigation of typical mortars used on ancient architecture in China10.1016/j.tca.2008.03.019 ↗
2. A guide to CO2 sequestration10.1126/science.1079033 ↗
3. Why capture CO2 from the atmosphere?10.1126/science.1175680 ↗
4. CO2 capture and storage closing the knowing -doing gap10.1205/cherd05049 ↗
5. Mineral CO2 sequestration by environmental biotechnological processes10.1016/j.tibtech.2013.01.005 ↗
6. Morphological influence of magnesium and organic additives on the precipitation of calcite10.1016/S0022-0248(01)01519-6 ↗
7. CO2 capture in the cement industry10.1016/j.egypro.2009.01.014 ↗
8. International Energy Agency, (IEA), CO2 Capture In The Cement Industry, Technical Study, Report Number 2008/3; July 2008.
9. CO2 emission reduction within Chinese iron & steel industry: practices, determinants and performance10.1016/j.jclepro.2012.04.012 ↗
10. A comparison study of EU and Japan methods to assess CO2 emission reduction and energy saving in the iron and steel industry10.1016/j.enpol.2012.08.075 ↗
11. A bottom-up model to estimate the energy efficiency improvement and CO2 emission reduction potentials in the Chinese iron and steel industry10.1016/j.energy.2012.10.062 ↗
12. Chemical, mineralogical, and morphological properties of steel slag10.1155/2011/463638 ↗
13. Properties and hydration of blended cements with steelmaking slag10.1016/j.cemconres.2007.03.008 ↗
14. Adolfsson · 2011
15. An over view of utilization of slag and sludge from steel industries10.1016/j.resconrec.2006.05.008 ↗
16. Steel slag – its production, processing, characteristics, and cementitious properties10.1061/(ASCE)0899-1561(2004)16:3(230) ↗
17. The role of Mg2+ as an impurity in calcite growth10.1126/science.290.5494.1134 ↗
18. Role of Mg ions in modulating the morphology and structure of CaCO3 crystals grown in aqueous foams10.1039/b501420b ↗
19. Thermoluminescence mechanism of Mn2+, Mg2+ and Sr2+ doped calcite10.1016/S0022-3697(99)00208-5 ↗
20. Assessing the carbonation behavior of cementitious materials10.1061/(ASCE)0899-1561(2006)18:6(768) ↗
21. Chemical, microstructural and strength development of calcium and magnesium carbonate binders10.1016/j.cemconres.2009.02.003 ↗
22. http://zh.wikipedia.org/wiki/%E6%B0%A7%E5%8C%96%E9%95%81; 2013.10.1308/003588413X13511609957858 ↗
23. Chemical, microstructural and strength development of calcium and magnesium carbonate binders10.1016/j.cemconres.2009.02.003 ↗
24. Magnesian calcites: low-temperature occurrence, solubility and solid-solution behavior
25. Carbonation reaction of lime, kinetics at ambient temperature10.1016/j.cemconres.2004.06.020 ↗
26. Synthesis of needle-like aragonite from calcium chloride and sparingly soluble magnesium carbonate10.1016/j.powtec.2004.01.001 ↗
27. The co-effect of collagen and magnesium ions on calcium carbonate biomineralization10.1016/j.msec.2005.08.038 ↗
28. The role of magnesium in stabilising amorphous calcium carbonate and controlling calcite morphologies10.1016/S0022-0248(03)01153-9 ↗
29. The dual role of fibrinogen as inhibitor and nucleator of calcium phosphate phases the importance of structure10.1006/jcis.1996.0029 ↗
30. Effects of magnesium chloride and organic additives on the synthesis of aragonite precipitated calcium carbonate10.1016/j.jcrysgro.2008.01.023 ↗
31. In situ kinetic measurements of gas–solid carbonation of Ca(OH)2 by using an infrared microscope coupled to a reaction cell10.1016/j.cej.2010.04.041 ↗
32. A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO210.1016/j.jhazmat.2004.04.019 ↗