Effect of composition variations on bond properties of Self-Compacting Concrete specimens
Source abstract
Abstract
Abstract Self-Compacting Concrete (SCC) has been distinguished as a promising replacement of Normally Vibrated Concrete (NVC). Since current literature has already provided sufficient data to give confidence in SCC bond behavior, further analysis should focus on confirmational or more specific analysis. The impact of water-to-binder ratio variations and different silica fume levels of cement replacement on SCC bond has been the incentive of the present study. Pull-out tests in cube specimens have been conducted for 11 SCC and 4 NVC mixtures. Various bond stresses have been evaluated. The composition changes seem be better reflected on lower bond stresses, which decrease linearly for higher water content and higher silica fume replacement levels. SCC develops an improved bond capacity compared to same strength NVC with similar composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. EN 1992. Design of concrete structures, Part.1-1: General rules and rules for buildings. European committee for standardization; 2004.
2. ACI 318 · 2008
3. Towards a harmonized European bond test
4. Effect of reinforcing bar orientation and location on bond with self-consolidating concrete
5. Boel V, Helincks P, Desnerck P, De Schutter G. Bond behaviour and shear capacity of self-compacting concrete. In: Khayat KH, Feys D, editors. Design, production and placement of self-consolidating concrete. Proceedings of SCC2010 RILEM conference, Montreal, Canada, September 26–29. Springer: New York; 2010. p. 355–66.10.1007/978-90-481-9664-7_29 ↗
6. Bond behaviour of reinforcing bars in self-compacting concrete: Experimental determination by using beam tests10.1617/s11527-010-9596-6 ↗
7. Development of bond strength of reinforcement steel in self-consolidating concrete
8. Bond and interfacial properties of reinforcement in self-compacting concrete10.1007/BF02481580 ↗
9. Bond-slip behavior of self-compacting concrete and vibrated concrete using pull-out and beam tests10.1617/s11527-007-9307-0 ↗
10. Bond behaviour of reinforcement in self-compacting concretes10.1016/j.conbuildmat.2008.01.007 ↗
11. Top-bar effect of steel bars in self-consolidating concrete10.1016/j.cemconcomp.2007.05.012 ↗
12. Bond strength of deformed bars in large reinforced concrete members cast with industrial self-consolidating concrete mixture10.1016/j.conbuildmat.2009.10.007 ↗
13. Trezos GK, Sfikas PI, Palmos SM, Sotiropoulou KE. Top-bar effect in self-compacting concrete elements. In: Khayat KH, Feys D, editors. Design, production and placement of self-consolidating concrete. Proceedings of SCC2010 RILEM conference, Montreal, Canada, September 26–29. Springer: New York; 2010. p. 355–66.10.1007/978-90-481-9664-7_30 ↗
14. Bond strength of reinforcement steel in self-compacting concrete
15. Variability of the bond and mechanical properties of self-compacting concrete
16. A review of the hardened mechanical properties of self-compacting concrete10.1016/j.cemconcomp.2006.07.010 ↗
17. EN 10080. Steel for the reinforcement of concrete; 2005.
18. EN 197. Cement – Part 1: Composition, specifications and conformity criteria for common cements; 2000.
19. ACI 234 · 2006
20. ASTM C1240. Standard specification for silica fume used in cementitious mixtures; 2003.
21. EN 206. Concrete – Part 1: Specification, performance, production and conformity; 2000.
22. Federal highway administration. Silica fume. US department of transportation. [accessed on 07.17.12].
23. EN 1097. Tests for mechanical and physical properties of aggregates – Part 6: Determination of particle density and water absorption; 2000.
24. EN 934. Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures. Definitions, requirements, conformity, marking and labeling; 2009.
25. Khayat KH, Hu C, Monty H. Stability of self-consolidating concrete, advantages, and potential applications. First International RILEM symposium on self-compacting concrete. Rilem Publications s.a.r.l. 1999; p. 143–52.
26. Effect or water/cement ratio on the fresh and hardened properties of self-compacting concrete10.1016/j.buildenv.2006.01.012 ↗
27. Durability performance of self-compacting concrete10.1016/j.conbuildmat.2012.07.049 ↗
28. EN 12350. Testing fresh concrete – Part 8: Self-compacting concrete – slump-flow test; 2010.
29. ASTM C1611. Standard test method for slump flow of self-consolidating concrete. Annual Book of ASTM Standards. Section 04, V04.02: Concr Aggreg; 2007.
30. EN 12350. Testing fresh concrete Part 9: Self-compacting concrete – V-funnel test; 2010.
31. EN 12350. Testing fresh concrete Part 10: Self-compacting concrete – L-box test; 2010.
32. EN 12350. Testing fresh concrete – Part 2: Slump test; 2009.
33. BIBM, CEMBUREAU, EFCA, EFNARC, ERMCO. European guidelines for self-compacting concrete: specification, production and use; 2005.
34. EN 12390. Testing hardened concrete – Part 2: Making and curing specimens for strength tests; 2009.
35. EN 13670. Execution of concrete structures; 2009.
36. EN 12390. Testing hardened concrete – Part 3: Compressive strength of test specimens; 2009.
37. EN 12390. Testing hardened concrete – Part 4: Compressive strength. Specification for testing machines; 2009.
38. RILEM TC. RILEM recommendations for the testing and use of constructions materials, RC 6 bond test for reinforcement steel. 2. Pull-out test, 1983, E & FN SPON; 1994. p. 218–20.
39. Effects of bar-placement conditions on steel–concrete bond10.1617/s11527-005-9030-7 ↗
40. FIB Bulletin 10. Bond of reinforcement in concrete, State-of-art report, Lausanne (Switzerland); 2000.
41. Sonebi M, Bartos PJM. Bond behavior and pull-off test of self compacting concrete. Bond in concrete: from research to standards, proceedings of the 3rd international, symposium, 2002(November); p. 511–9.
42. Sonebi M, Bartos PJM. Hardened SCC and its bond with reinforcements. In: Proceedings of RILEM international symposium on SCC, Stockholm; 1999. p. 275–90.
43. Koning G, Holschemacher K, Dehn, F, Weisse D. Self-compacting concrete time development of material properties and bond behavior. In: Ozawa K, Ouchi M, editors. Proceedings of second international symposium on self-compacting concrete, Tokyo; 2001. p. 507–16.
44. Schiessl A, Zilch K. The effects of the modified composition of SCC on shear and bond behavior. In: Ozawa K, Ouchi M, editors. Proceedings of second international symposium on self-compacting concrete, October; 2001. p. 501–6.
45. Gibbs JC, Zhu W. Strength of hardened self-compacting concrete. In: Proceedings of RILEM international symposium on SCC, Stockholm; 1999. p. 199–209.
46. Lorrain M, Daoud A. Bond in Self-compacting concrete. Bond in concrete: from research to standards. In: Proceedings of the 3rd international, symposium, November; 2002. p. 529–36.