Mechanical and durability properties of concretes containing paper-mill residuals and fly ash
Source abstract
Abstract
Abstract The use of paper-mill residuals in concrete formulations was investigated as an alternative to landfill disposal. The mechanical and durability properties of concrete containing paper-mill residuals collected from a wastewater treatment-plant were evaluated. Class F fly ash was used as a replacement for Portland cement (PC) when incorporated into concrete mixtures containing paper-mill residuals and the resulting products were compared to normal concrete. Compressive, splitting tensile, flexural strength and drying shrinkage tests were carried out to evaluate the mechanical properties for up to 90 days. Rapid chloride-permeability tests and initial surface-absorption tests were carried out at 28 days to determine the durability properties. Concrete containing paper-mill residuals showed improvement in the durability test results when PC was replaced with class F fly ash.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Beneficial Use of Industrial By-Products. National council for air and stream improvement (NCASI). Madison: WI; 2003.
2. Scott GM, Smith A. Sludge characteristics and disposal alternatives for the pulp and paper industry. In: Proceedings of the 1995 international environmental conference. Technical association of the pulp and paper industry (TAPPI): Atlanta, GA; 1995. p. 269–79.
3. Solid Waste Management Practices in the US. Paper Industry – 1995, Technical Bulletin No. 793, National council for air and stream improvement (NCASI): Research Triangle Park, NC; 1999.
4. Ingram HE. Paper waste – part of the solution. In: Proceedings, recycling symposium. TAPPI Press: Atlanta; 1993.
5. Thacker WE. Silvicultural land application of wastewater and sludge from the pulp and paper industry. University of Washington Press: Seattle, WA; 1985. p. 41–54.
6. Use of pulp and paper mill residual solids in production of cellucrete10.1016/j.cemconres.2003.12.013 ↗
7. Naik TR, Chun Y, Kraus RN. Concrete containing pulp and paper mill residuals, Report No. CBU-2003-42.1, UWM Center for By-Products Utilization, Department of Civil Engineering and Mechanics, The University of Wisconsin-Milwaukee; 2003.
8. Chun Y, Naik TR, Kraus Chun RN. Durable concrete through use of pulp and paper mill residuals, composites in construction 2005 – third international conference, Lyon, France; July 2005.
9. Naik TR, Chun Y, Kraus RN. Paper industry fibrous residuals in concrete and CLSM, Report No. CBU-2005-10, UWM Center for By-Products Utilization, Department of Civil Engineering and Mechanics, The University of Wisconsin-Milwaukee; November 2005.
10. Naik TR, Chun Y, Kraus RN. Use of residual solids from pulp and paper mills for enhancing strength and durability of ready-mixed concrete, Final report submitted to the US Dept. of Energy for the Project DE-FC07-00ID13867.
11. Decard JD, West RP, Prichard SJ. The impact response of recycled paper waste concrete, recovery and recycling of paper. Trinity College Dublin: Ireland; 2001. p. 81–92.
12. ASTM. Annual book of ASTM standards, vol. 04.02: concrete and aggregates. American Society for Testing and Materials: Philadelphia, PA; 2004.
13. Durability of concrete incorporating high volumes of fly ash from sources in US
14. ACI Committee 232. Use of fly ash in concrete (ACI 232.2R-03). American Concrete Institute: Farmington Hills, MI; 2003. p. 41.
15. BS EN 934. Admixtures for concrete, mortar and grout – Part 2: concrete admixtures – definitions, requirements, conformity, marking and labelling, London: British Standards Institution; 2001.
16. Concrete with paper industry fibrous residuals: mixture proportioning
17. BS EN 12390. Testing hardened concrete – Part 3: compressive strength of test specimens, London: British Standards Institution; 2001.
18. Tia M, Liu Y, Brown D. Modulus of elasticity, creep and shrinkage of concrete, U.F. Project No. 49104504973-12, Department of Civil & Coastal Engineering, College of Engineering, University of Florida, Gainesville, Florida; May 2005. p. 61–2.
19. BS 1881. Testing concrete – Part 208: recommendations for the determination of the initial surface absorption of concrete, London: British Standards Institution; 1996.
20. Neville · 1995
21. Bijen J, Selst I. CUR report 144, fly ash as addition to concrete, research carried out by INTRON. Institute for Material and Environmental Research B.V. A. A Balkema, Rotterdam; 1992.
22. Brink RH, Halstead WJ. Studies relating to the testing of fly ash for use in concrete. In: Proceeding, ASTM, vol. 56; 1956. p. 1161–206.
23. Nur · 1961
24. Sydney fly ash in concrete
25. Rehsi SS. Studies on Indian fly ashes and their use in structural concrete. In: Proceedings, 3rd international ash utilization symposium (Pittsburgh, Mar. 1973), information circular IC 8640, US Bureau of Mines: Washington, DC; 1973. p. 231–45.
26. Fly ash for use in concrete – a critical review
27. Bloem DL. Effect of curing conditions on compressive strength of concrete test specimens, NSGA Circular No. 59 and NRMC Publication No. 53, National Ready Mixed Concrete Association: Silver Spring; December 1954.
28. The reaction of fly ash in concrete: a critical examination10.1016/0008-8846(89)90088-4 ↗
29. Causes and control of volume change
30. High fly ash concretes
31. A possible method for identifying fly ashes that will improve the sulfate resistance of concretes, cement, concrete, and aggregates
32. Symons MG, Fleming KH. Effect of post Augusta fly ash on concrete shrinkage. Civil Eng Trans (Barton) vol. CE 22(3). p. 181–5.
33. Increase of bond strength at interfacial transition zone by the use of fly ash10.1016/S0008-8846(99)00241-0 ↗
34. Mehta · 1997
35. Investigation of relations between porosity pore structure and chloride diffusion of fly ash and blended cements10.1016/0008-8846(86)90049-9 ↗
36. Transport and mechanical properties of self consolidating concrete with high volume fly ash10.1016/j.cemconcomp.2008.12.003 ↗
37. Mechanical properties and rapid chloride permeability of concretes with ground fly ash