journal article·2004-05Open access

Microstructures and mechanical properties after heating of reinforcing 500 MPa class weldable steels produced by various processes (Tempcore, microalloyed with vanadium and work-hardened)

J Nikolaou, G.D Papadimitriou

Abstract

Abstract The load bearing capacity of reinforced concrete structures after fire can be assessed if the modified mechanical properties of the building materials, designated here as ‘residual’, are known. In this respect, the residual properties of reinforcing steels produced (a) by the Tempcore process; (b) microalloying with vanadium; and (c) work-hardening, all falling into grade FeB500S, were selected for investigation, aiming to represent a wide range of steels currently available for the construction industry in Europe. For both the microalloyed with vanadium and for the work-hardened reinforcing steels typical diameters were investigated. For the Tempcore-type reinforcing steels, due to their heterogeneous structure, the effect of size and composition have been also examined. Specimens of the above types of steel were heated at temperatures ranging from 200 °C to 800 °C for 1 h and then cooled in air to room temperature. Thereafter, their residual properties were assessed by hardness measurements, tensile and Charpy-V impact tests. Metallographic analysis was used to correlate mechanical properties to microstructural characteristics. From the above investigation it was concluded that the Tempcore steels presented the more stable behavior up to temperatures of 500 °C, while the microalloyed steel, although it presented very satisfactory tensile properties, displayed low impact toughness due to coarsening of vanadium carbides. The work-hardened steel showed a continuous drop of its properties from approximately 250 °C and suffered from brittleness in the vicinity of 200 °C due to strain aging phenomena.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Engineering and Material Science Research · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Sage AM. Effect of vanadium, nitrogen, and aluminium on the mechanical properties of reinforcing bar steels. In: Winterton House High Street, editor. VANITEC, Metals Technology. Kent: Westerham, 1976. pp. 65–7010.1179/030716976803391854 ↗
2. Glodowski RJ. Effect of V and N on processing and properties of HSLA strip steels produced by thin slab casting. In: Iron and Steel Society, editor. Proceedings of 42nd Mechanical Working and Steel Processing Conference, 38. Canada: Toronto, 2000. pp. 1–10
3. Effect of processing parameters on the microstructure and properties of an Nb microalloyed steel10.1016/S0167-577X(02)00440-8 ↗
4. Rehm G, Russwurm D. Assessment of concrete reinforcing bars made by the Tempcore process. Metall Rep C.R.M. No. 51, October 1977, pp. 3–16
5. Tempcore: a new process for the production of high quality reinforcing bars
6. Economopoulos M, Respen Y, Lessel G, Steffes G. Application of the Tempcore process to the fabrication of high yield strength concrete–reinforcing bars. Metall Rep C.R.M. No. 45, December 1975, pp. 1–17
7. The effects of elevated temperatures on the mechanical properties of reinforcing and prestressing steel
8. Mechanical properties of reinforcing and prestressing steels after heating10.1061/(ASCE)0899-1561(1996)8:4(189) ↗
9. Thermomecanically strengthened 25G2S reinforcing steel of strength class At-IVS
10. Influence of brief cyclic induction tempering on structure and properties of reinforcing steel
11. Quenched and tempered reinforcing steel resistant to corrosion cracking
12. Low temperature tempering of weldable, high strength reinforcing steel of classes A-IV to A-V
13. Influence of reheating on the structure and properties of quenched and self-tempered reinforcing steel
14. PrEN 10080-1, January 1999. Steel for the reinforcement of concrete, Part 1
15. ISO 6892, 1998. Metallic materials – Tensile testing at ambient temperature
16. A microscopic investigation of the precipitation phenomena observed during the pearlite reaction in vanadium alloyed carbon steels10.1016/0956-7151(95)90157-4 ↗
17. The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels10.1016/S0924-0136(01)00599-4 ↗
18. Influence of thermomechanical processing and accelerated cooling on microstructures and mechanical properties of plain and microalloyed steels10.1179/026708399101505554 ↗
19. Effects of temper embrittling heat-treatment on ductile failure in high-strength low-alloy steel10.1179/030634581790426516 ↗
20. The influence of grain boundary carbide and grain size on the cleavage strength and impact transition temperature of steel10.1016/0001-6160(86)90026-X ↗
21. Substructure strengthening in Fe–V–Ni alloys10.1016/0001-6160(88)90015-6 ↗