journal article·2013-11

An investigation of mechanical behavior of cement-stabilized crushed rock material using different compaction methods

Y.J. Jiang, L.F. Fan

Publisher page

Abstract

Abstract The mechanical behavior, e.g. compressive strength, tensile strength and resilient modulus, plays an important role in the performance of cement-stabilized crushed rock material (CCRM). This paper presents an investigation on the mechanical behavior of CCRM based on the quasi-static compaction method (QSCM) and the vertical vibration compaction method (VVCM), respectively. The unconfined compressive strength, splitting tensile strength and resilient modulus of laboratory produced CCRM using QSCM and VVCM are measured and compared. The effects of cement content and curing time on the mechanical behavior are studied. Field measurements are subsequently carried out to validate the laboratory investigations. The results show that the compressive strength, tensile strength and resilient modulus of CCRM by VVCM are 2.5, 1.9 and 1.6 times of the CCRM by QSCM, respectively. In addition, the compressive strength, tensile strength and resilient modulus all increase as the cement content and curing time increase, while the ratio of compressive strength to tensile strength decreases as the curing time increases. The results also show that the mechanical behavior of laboratory produced CCRM by VVCM has a better agreement with the field measurements than the laboratory produced CCRM by QSCM. The laboratory produced CCRM by VVCM can be used to imitate the practical CCRM for approximate calculation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Geotechnical and construction materials studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Chakrabarti S. Shrinkage behaviour of cementitiously stabilized crushed basaltic rocks as applicable to pavement rehabilitation. Monash University: PhD thesis; 2004.
2. Mechanical behaviours of hydrated cement treated crushed rock base as a road base material in Western Australia10.1080/10298430802342682 ↗
3. Hoff I. Material properties of unbound aggregates for pavement structures. Norwegian University of Science and Technology: PhD thesis; 1999.
4. Survey results on stabilization methods and performance of local government roads in Australia
5. Stabilization of crushed basaltic rocks and clay mixtures using cementitious additives10.1061/(ASCE)0899-1561(2005)17:4(432) ↗
6. Use of the strut-and-tie model in analysis of reinforced cement-stabilised rammed earth10.1061/(ASCE)MT.1943-5533.0000215 ↗
7. Abadi SS, Yekkalam A, Rafsanjani MBM. Determining compaction and water content ratio of compacted soil using “hilf” rapid method. In: The 4th international conference on geotechnical engineering and soil mechanics, Tehran, Iran, 2–3 November; 2010. p. 1–7.
8. Compressive strength characteristic of cement stabilised rammed earth walls10.1016/j.conbuildmat.2006.05.049 ↗
9. Experimental investigation on the compressive strength of cored and molded cement-stabilized rammed earth samples10.1016/j.conbuildmat.2011.08.070 ↗
10. Direct tensile failure of cementitiously stabilized crushed rock materials10.1139/t06-102 ↗
11. A direct tensile strength testing method for unsaturated geomaterials10.1520/GTJ11767 ↗
12. Tensile stress–strain characteristics of lightly cemented sand10.1520/GTJ10105J ↗
13. The resilient moduli of cement treated materials
14. Limit-state curve of base-course material and its relevance for resilient modulus testing10.1061/(ASCE)1090-0241(2006)132:2(173) ↗
15. Shrinkage behaviour of crushed basaltic rock and residual clay mixture stabilized with cementitious binders10.1080/10298430500068654 ↗
16. Investigation of fracture properties of cement-treated crushed rock
17. Modeling of moisture diffusion in crushed basaltic rock stabilized with cementitious binders10.1061/(ASCE)0899-1561(2005)17:6(703) ↗
18. Influence of laboratory compaction methods on shear performance of graded crushed stone10.1061/(ASCE)MT.1943-5533.0000323 ↗
19. The strength of cement stabilization of crushed aggregate experimental research
20. Huang W, Li X, Qian Z, Li Z. Analysis on mechanical mechanism of thermosetting epoxy asphalt concrete using mesomechanics approach. In: Proceedings of the 11th international conference of chinese transportation professionals, ASCE, Nanjing, China; 2011. p. 2563–72.
21. Ministry of Transport of the People’s Republic of China. Test methods of materials stabilized with inorganic binders for highway engineering. JTG E51-2009.
22. Ministry of Transport of the People’s Republic of China. Technical Specification for Construction of Highway Asphalt Pavements. JTG F40-2004.