journal article·2015-12

Glass fiber reinforced asphalt membrane for interlayer bonding between asphalt overlay and concrete pavement

Zhesheng Ge, Hao Wang, Qingshan Zhang, Chunlong Xiong

Publisher page

Abstract

Abstract The aim of this study is to evaluate the shear and fatigue behavior of asphalt concrete (AC) overlay on Portland cement concrete (PCC) pavement with different interlayer bonding materials, including modified emulsified asphalt (MEA) membranes, modified asphalt (MA) membranes, glass fiber reinforced modified emulsified asphalt (GFMEA) membranes and glass fiber reinforced modified asphalt (GFMA) membranes. An in-house shearing device was used to evaluate the shear behavior between asphalt layer and PCC layer. An orthogonal experimental design was performed to determine the impact of each influential factor on the interlayer shear behavior, including the testing temperature, the bonding material, and the confinement pressure applied during the tests. The results indicate that AC overlay on PCC pavement can reach its optimal performance in terms of shear toughness when the GFMA is used at the interlayer. Four-point bending fatigue tests were conducted on the AC beam with interlayers using the Material Test System (MTS). The fractal dimension (FD) of fatigue cracks in AC overlay was analyzed using image measurements. The results show that the AC beam with the GFMA has a longer fatigue life. Therefore, it is concluded that the GFMA can strengthen bonding and mitigate reflection cracking of AC overlay on PCC pavements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Applied Research Associates Inc, Composite Pavement Systems vol. 1: HMA/PCC Pavements, Strategic Highway Research Program 2, Transportation Research Board, 2015.
2. Evaluation of surface-related pavement damage due to tire braking10.1080/14680629.2010.9690262 ↗
3. Characterization of asphalt concrete layer interfaces
4. Lytton · 2010
5. Effects of interface conditions on reflective cracking development in hot-mix asphalt overlays10.1080/14680629.2010.9690278 ↗
6. Characterization of interface bonding between hot mix asphalt and concrete pavements10.1080/10298436.2011.596935 ↗
7. M. Elseifi, R. Bandaru, Cost effective prevention of reflective cracking of composite pavement, FHWA/LA.11/478, Final Report, Louisiana Department of Transportation and Development, 2011.
8. I.L. Al-Qadi, W.G. Buttlar, J. Baek, M. Kim, Cost-effectiveness and performance of overlay systems in illinois, volume 1, Effectiveness Assessment of HMA Overlay Interlayer Systems Used to Retard Reflective Cracking, FHWA-ICT-09-044, Final Report, Illinois Department of Transportation, 2009.
9. Sheng · 2010
10. M.T. Mukhtar, B.J. Dempsey. Interlayer Stress Absorbing Composite (ISAC) for Mitigating Reflection Cracking in Asphalt Concrete Overlays. Report UILU-ENG-96-2006. Department of Civil Engineering, University of Illinois at Urbana-Champaign, 1996.
11. Y.H. Cho, C. Liu, T. Dossey, B.F. McCullough, Asphalt Overlay Design Methods for Rigid Pavements Considering Rutting, Reflection Cracking, and Fatigue Cracking. Research Report 987–9. Texas Department of Transportation, Research and Technology Transfer Section/Construction Division, 1998.
12. New device and methodology for evaluating the shear behavior of steel bridge deck pavement pasted by GFRP sheets10.1520/JTE20120343 ↗
13. The theoretical analysis of orthogonal test designs
14. Fatigue of bituminous mixtures10.1007/BF02481620 ↗
15. Mandelbrot · 1997
16. Fractal effects of dynamic crack propagation