journal article·2016-05

Assessment of test methods for characterizing the hydrophobic nature of surface-treated High Performance Concrete

Sandro Weisheit, Seraphin Hubert Unterberger, Tobias Bader, Roman Lackner

Publisher page

Abstract

The durability of concrete and concrete structures is significantly influenced by environmental conditions, resulting in e.g. the ingress of water and incorporated aggressive agents, with the latter being responsible for initiating and progress of deterioration processes within the material system. In order to reduce the ingress of water, water repellent agents are applied onto the concrete surface (surface treatment), with its performance strongly depending on the agent itself, the mode of application, environmental conditions etc. For the assessment of the performance of surface-treated concrete, standard test methods, such as Karsten-Tube penetration test, contact angle measurement, hydrophobic quality test, as well as more refined test methods, such as Infrared Spectroscopy (IR), moisture sorption analysis, and scanning electron microscopy coupled with elemental X-ray analysis (SEM/EDS) are used. These methods are commonly employed for the assessment of surface-treated ordinary concrete, leaving the question on their applicability to material systems exhibiting a denser microstructure, such as High Performance Concrete (HPC), unanswered. Within this experimental study, the aforementioned test methods are critically reviewed regarding their potential application to HPC, finally providing recommendations for evaluating the performance and durability of water-repellent surface treatment when applied to HPC. (C) 2016 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Effect of chloride salt, freeze–thaw cycling and externally applied load on the performance of the concrete10.1016/S0008-8846(02)00769-X ↗
2. Stark, D. Durability of concrete in sulfate-rich soils. Research and Development Bulletin RD097, Skokie Illinois, 1989.
3. Mechanism of concrete deterioration due to salt crystallization10.1016/j.matchar.2004.08.013 ↗
4. Carbonation of concrete and its prediction10.1016/0008-8846(87)90012-3 ↗
5. Neville · 2012
6. EN 1504–2, Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity, in: Part 2: Surface Materials and Structures protection systems for concretes, European Committee for Standardization, Brussels, 2004.
7. Long-term performance of surface impregnation of reinforced concrete structures with silane10.1016/j.conbuildmat.2013.07.038 ↗
8. Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: the role of cracks10.1016/j.cemconcomp.2009.11.001 ↗
9. Hydrophobic treatment of concrete10.1016/S0950-0618(97)00046-9 ↗
10. Panzer · 2006
11. Recommendations for water repellent surface impregnation of concrete10.1515/rbm-2011-6476 ↗
12. A. Gerdes, S. Meier, F. Wittmann, A new application technology for water repellent surface treatment, in: Proceedings of the 2nd International Conference on Water Repellent Treatment of Buildings Materials, Aedificatio Publishers, Zurich, Switzerland, 1998, pp. 217–230.
13. Efficacy of surface hydrophobic agents in reducing water and chloride ion penetration in concrete10.1617/s11527-006-9218-5 ↗
14. Influence of the surface properties of concrete on the adhesion of coating: Characterization of the interface by peel test and FT-IR spectroscopy10.1016/j.porgcoat.2011.05.009 ↗
15. Surface morphology and chemistry of epoxy-based coatings after exposure to ultraviolet radiation10.1016/j.porgcoat.2012.12.010 ↗
16. Properties and performance of silane: blended cement systems10.1617/s11527-012-9984-1 ↗
17. Hydrophobic treatments on concrete-Evaluation of the durability and non-destructive testing
18. A. Gerdes, Assessment of water repellent treatments by the application of FT-IR spectroscopy, in: First International Symposium on Surface Treatment of Building Materials with Water Repellent Agent. Delft, Netherlands, pp. 12/01–12/09, 1995.
19. Determination of the impregnation depth of siloxanes and ethylsilicates in porous material by neutron radiography10.1016/j.culher.2007.08.001 ↗
20. Characterisation of transport processes in surface near zones of concrete by means of neutron radiography
21. F. H. Wittmann, P. Zhang, T. Zhao, E. Lehmann, P. Vontobel, C. Miao, G. Ye, H. Chen, Neutron radiography, a powerful method for investigating water penetration into concrete, The 50-year Teaching and Research Anniversary of Prof. Sun Wei on Advances in Civil Engineering Materials, 2010, 61–70.
22. Surface treatments for concrete: assessmentmethods and reported performance10.1016/S0950-0618(97)00019-6 ↗
23. Influence of water-to-cement ratio and curing period on pore structure of cement mortar10.1016/j.conbuildmat.2012.09.058 ↗
24. S. Weisheit, S.H. Unterberger, A. Saxer, M. Noisternig, U. Griesser, R. Lackner, Charakterisierung des Porenraumes zementgebundener Materialien mittels SEM-FIB DualbeamTM-Mikroskopie, in: 18. Internationale Baustofftagung ibausil, Weimar, Germany, vol. 2, 2012, pp. 0739–0746 (in German).
25. Analysis of silicones
26. 1975 · vol. 1
27. Infrared spectra-structure correlations for organosilicon compounds10.1016/0371-1951(60)80074-4 ↗
28. U.J. Griesser, J. Dillenz, Neuartiges. vollautomatisches Feuchtesorptionsprüfgerät mit hohem Probendurchsatz. 11. Feuchtetag, Weimar, Germany, 85–93 (2002). in German.
29. DIN 1048, Prüfverfahren für Beton – Festbeton, gesondert hergestellte Probekörper, Beuth Verlag, Berlin, 1991 (in German).
30. Hydrophobic engineered cementitious composites for highway applications10.1016/j.cemconcomp.2014.12.009 ↗