journal article·2016-06

Abrasion and skid resistance of recyclable fly ash concrete pavement made with limestone aggregate

Isamu Yoshitake, Sayaka Ueno, Yuta Ushio, Hiroki Arano, Sunao Fukumoto

Publisher page

Abstract

Abstract The abrasion and subsequent skid resistance of recyclable concrete pavement using raveling tests with tire chains has been examined, since the abrasion of limestone aggregate-containing concrete pavements is of concern. The recyclable concrete was made by replacing 40% of the cement mass with fly ash concrete. Limestone rock fine and coarse aggregates were mixed in the concrete with a water/cementitious material ratio of 0.33 for early adequate strength. The test results show: (1) the abrasion wear of the recyclable concrete increases gradually with an increase of fly ash; (2) the skid resistance of the recyclable concrete is almost equal skid resistance to the concrete with siliceous aggregate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Tensile properties of high volume fly-ash (HVFA) concrete with limestone aggregate10.1016/j.conbuildmat.2013.08.020 ↗
2. Thermal stress of high volume fly-ash (HVFA) concrete made with limestone aggregate10.1016/j.conbuildmat.2014.08.028 ↗
3. Abrasion resistance of concrete as influenced by inclusion of fly ash
4. Pavement construction with high-volume class C and F fly ash concrete
5. Effect of source of fly ash on abrasion resistance of concrete10.1061/(ASCE)0899-1561(2002)14:5(417) ↗
6. High volume fly ash abrasion resistant concrete10.1061/(ASCE)0899-1561(2002)14:3(274) ↗
7. Relation between abrasion resistance and flexural strength of high volume fly ash concrete10.1007/BF02533087 ↗
8. Abrasion-porosity-strength model for fly ash concrete10.1061/(ASCE)0899-1561(2003)15:4(408) ↗
9. Evaluation of properties of high-volume fly-ash concrete for pavements10.1061/(ASCE)0899-1561(2007)19:10(906) ↗
10. Abrasive wear evolution in concrete pavements10.1080/14680629.2012.694094 ↗
11. Abrasion resistance of self-consolidating concrete10.1061/(ASCE)MT.1943-5533.0000847 ↗
12. A study on concrete paving with limestone aggregate and limestone powder (in Japanese)
13. Japan Road Association (JRA) · 2007
14. Paving blocks made with recycled concrete aggregate and crushed clay brick10.1016/j.conbuildmat.2005.01.044 ↗
15. Effects of contaminants on the properties of concrete paving blocks prepared with recycled concrete aggregates10.1016/j.conbuildmat.2005.06.031 ↗
16. Effects of compaction method and rubber content on the properties of concrete paving blocks10.1016/j.conbuildmat.2011.08.069 ↗
17. Assessing friction response of nanoconcrete for rigid pavements using British Pendulum Tester and Tribometer
18. Durability of concrete using limestone aggregate with much content particles finer than 75μm sieve
19. V.M. Malhotra, P.K. Mehta, High-Performance, High-volume Fly Ash Concrete for Building Sustainable and Durable Structures, third ed., ACI, 2008.
20. ASTM E303 · 2013